Portege R700-172 high frequency twittering

Similar Questions

• Portege R700 - 11G - high and annoying fan noise

  Dear friends:

  I have a Portege R700 - 11G, I bought only two weeks ago.

  The computer works fine, except for the high and annoying fan noise.

  Even do nothing, only to start and sometimes in the bios Setup, the fan is always turn with a temperature of 40 ° or 50.

  I've updated the BIOS and I don't know what to do.

  Can someone help me please?
  Thank you very much.

  Hi mate

  Please check the settings in the Windows 7 power management!

  There you can optimize the CPU and cooling performance module this should help reduce heat dissipation and fan speed.

  In addition I recommend upgrading the Toshiba Fingerprint Software immediately to the version V1.0.2.32 or higher. In addition, turn off the power save option of fingerprint device in Device Manager.

  Device Manager->-> authentic Tec Inc AES1610-> the power management of biometric devices

  Here, you will have to remove the mark next to the option called allow the computer to turn off this device to save power.
  Disable the power saving mode will reduce the life of the battery, so you can check whether or not it helps reduce noise.

• Portege R700-172 how to replace SSD

  How can I replace the SSD by a standard HDD? Toshiba has used connectors in the R700-172.

  Post edited by: tron

  Hi tron.

  Can you post a screenshot of this special connector?

  AFAIK all SSDS on the market have the same connector, it s SATA port so that I can t imagine that you are not able to install a normal HARD drive, because they have the same port SATA SSD.

• Portege R700 - 172 Portable Firefox does not work with Win7 x 64

  Hello
  did someone use successfully the portable firefox on this machine? It does not work on my machine. I guess it does not support Windows 7 x 64?

  Hello

  AFAIK the portable firefox is designed for mobile use.
  Means that you can place it on the USB flash key, and there is no need to be installed on the operating system.
  Therefore, I doubt that the Win 7 64 bit operating system is the reason why it s not working do not.

  The portable firefox is based on the official version of the common Firefox browser and is compatible with Win 2000, Win XP, Windows Vista, Windows 7.

  In your case, I would ask in the forums of Firefox for details.
  But it would be interesting to know what could cause this part please so the news with us if you will get more details

• Portege R700 - BIOS-update 2.20 - WIN does not work

  I have a Portege R700-172-PT311E-03201KGR
  It's a WIN 7 64 bit Machine.

  Current BIOS 1.70
  EC-current Version: 1.40

  For this machine, an update of the BIOS and IT's there.
  So I downloaded the "BIOS220_EC160.exe" update and tried to treat.

  The first message during the update process is: "it is necessary to update the BIOS and THIS.
  When I continue with "Run the update", I get the error message:
  "Error: preparation of updated failed.
  Given the image file is not compatible with this cimputer.

  There is no change in the material of the machine. The only problem I see is that we use McAfee Endpoint Encryption (V6.0.2.6) that could have some influence on the update of the BIOS.

  But I'm not sure.
  Does anyone have an ideas?

  Hello

  BIOS update is important to you?
  Do you have problems with the laptop?

  I have portable three-year-old BIOS was did not updated

  However, AFAIK the VAP (value added package) must be to get the updated BIOS updated. Also the firewalls and other security and antivirus preinstalled on the system software must be disabled before attempting to update the BIOS.

• Portege R700 - high CPU fan noise

  Hello

  I own the Canadian version of the Portege R700, called Tecra R700 (PT319C-00E002).
  The CPU fan always runs between 43 percent and 51 percent (regardless of the mode of selected frequency), which makes the noisy computer - too noisy to be used comfortably, too noisy to be used at meetings of air-conditioned silent.

  The fan seems to be controlled by the BIOS, as well as applications such as SpeedFan are unnecessary. Is there a way to fix this?

  Kind regards.

  Hi dernierrecours,

  > CPU fan always running between 43 percent and 51 percent (regardless of the selected frequency mode)
  This means that the fan runs always at the same level regardless cooling method that you can choose in Windows power management?

  Well, have you tried updating the BIOS? The latest version is installed?
  Check out the Toshiba page for an update.

• Portege R700 - high pitched noise

  I have a high pitched noise of my Portege R700 - 11 p. The noise is in the upper range of the sound signal (perhaps around 15'000 Hz) and is regularly increasing and decreasing at a rate of about 0.5 Hz. He is always there that if the laptop is plugged into the power source and sleep, this is sometimes if the laptop is connected and running and he faints immediately if I plug off the coast. The noise seems to come from the upper left corner of the laptop. It is not very strong, but clearly audible and quite annoying after awhile. Someone knows why this noise and any opportunity to get rid of it?
  Thanks, Martin

  Hey,.

  There are already two threads on this high pitched noise in the forum. Please check these threads, it should be useful and interesting:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57452
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57509

• Portege R700 - slow DVD burning

  all of a sudden for some reason any CD/DVD burn on my new Portege R700 has almost ground to stop. It worked fine initially, but now won't have high peaks of 1 MB/sec... it is a REAL pain...

  The problem occurs with both the DVD player built-in and a USB connected drive that has worked well for years, so there must be a problem with o/s or H/S any. am about to update the BIOS but with no real hope

  I did some research on Google and things seem to point to the IDE controller issues. I took some advice and remove / reinstall the controller, but to no avail...

  someone else has the same problem - or, more importantly, a solution please?

  in some desparation

  Tim

  Hello

  not easy to say why it is burning so slow. have you tried burning with other discs and programs?

• Portege R700, Windows 7, mounted sudden fan/cpu, freeze and force stop

  Hello

  I have a persistent problem that starts to become annoying... Portege 700 running Windows 7. Normal use (office, WMP, IE anything heavy)

  No apparent reason (no new requests started for example), there is a sudden increase in the speed of the fan which should be max (looks it takes off) and I suspect use of the processor at the same time. And it's that it's not simply to stop (I left for awhile on occasion) and does not match an input (keyboard or mouse). The only 'solution' is to use the power button to force a shutdown. (And then I lose all cookies etc. when starting again).

  I did a lot of Googling on that. Thought it was WMP network sharing Service and has taken measures to see, but have recently disabled that service and still the problem occurs... (I checked that it is always disabled when just rebooted).

  I keep as 'clean' as I can (have AV installed, use ccleaner regularly etc etc) so would be surprised if a virus/worm, but am running a scan again just in case...

  This happens quite often be a pain - and I have no idea what is the cause, if any ideas gratefully received.

  Thanks in advance.

  Tim

  Hello

  I m no owner on the site Web of Toshiba Portege R700 but I found an article that describes EXACTLTY the same problem. High activity of its use and CPU fan, then it freezes :(
  Here is the link to this article:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software could help get rid you of this problem. :)

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Portege R700 - missing rubber stopper, replacements?

  Hi all

  I have a Portege R700, and the rubber plug on the lower left corner, the one nearest the suction fan broke.

  Other than aesthetics, it has consequences more serious, which impede the flow of air to the system and potentially leading to higher time and/or limitation.

  My question is, is it possible to get replacements?

  Thanks in advance

  I put t know for sure, but I think he can be replaced. The question is where you can get it.
  Try to contact the closest service Toshiba and ask if they can order it for you. To be honest, I don't think you can buy it as part separately.

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• REGZA 40 "LCD TV emits noise high frequency

  A few months ago, I was lucky to win this TV, a 106 cm LCD Regza HD display.
  I was very happy because I could never afford it myself, and I am very happy with its performance in general.

  I found however is that it emits a high frequency noise that triggers tinnitus in my hearing. (For tinnitus are a squeaking noise acute heard by people who have damaged their ears, sometimes called ringing in the ears).

  I guess that my hearing is already sensitive listening to lots of live music over the years, but I think that this noise is excessive.
  I think that a monitor of this size is by using a good amount of power and maybe feeding could be too work itself.

  The monitor makes this noise at a constant level even before the start of the sound of the TV show.
  I'm curious to know what the suggestion forum users to reduce the background noise?

  The monitor is still under warranty because it is only 6 months old.
  I wanted to be prepared to discuss with the Toshiba warranty people if the forum users can suggest, first, what could be the cause of noise and on the other hand, the possible ways to address the issue.

  Thank you petekey4

  Hello Pete

  As you can see it's Toshiba computer forum and I do not think you will find a lot of people here who want to discuss LCD Toshiba TV.
  In any case, if the TV is new and with valid warranty the best option for you is to contact the service people and let check your new TV.

• Portege R700 - impossible to pass to Windows 10

  I have a Portege r700 with original Windows 7 OEM installation.

  Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

  The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

  After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

  I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

  I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

  Any idea?

  I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
  concerning
  / Anders

• Portege R700-19 t - new RAM-> start is no longer

  Hello together,

  so I bought two new RAM sticks for my old laptop
  Toshiba Portege R700-19 t

  But since I installed them, the machine does not start in an operating system more.
  The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

  The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

  The next thing was memtest86 + v4.20:
  It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
  I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

  In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.
  
  Plug portable-mem from toshiba:

  • Standard: 4 (2 + 2) GB
  • Max Speicherausstattung: 8 GB
  • Technology: DDR3 RAM (1,066 MHz)

  link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

  Cannes-old (work) ram:
  2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

  new RAM sticks:
  2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
  link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

  In my understanding of both new sticks should work well with my laptop, or am I missing something?

  concerning

  For me, the question is clear enough; the laptop does not start because of new RAM modules.

  The new RAM modules are not totally compatible, or the RAM modules are defective.

  I recommend you test an other modules; for example modules manufactured by Kingston.