Portege R700-1CZ - cannot use the latest driver of fingerprints

Similar Questions

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

  Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

  In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

  The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

  In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

  I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

  HI PeterH,

  Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?

• Portege R700-S1321 - cannot set the resolution of 1366 x 768

  I have exactly the same problem, as shown in:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

  The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

  Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

  External monitors very well with the laptop work.

  Its 2.20 BIOS execution that seems to me later.

  It seems that the intel driver must get some information that is incorrect.
  Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

  I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

  I also tried to restore from the recovery many times discs without success.
  During the installation of windows occurs, the screen is fine.
  When Toshiba additional programs are added to the screen returns to the 1280 x 700.
  I suspect that what happens when the graphics driver intel is installed.

  If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

  Any idea is appreciated. Thank you.

  > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  I think you are on the right track, and I think that his untimely pilot.
  That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

  PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

  The latest Intel HD driver can be downloaded directly from the page of Intel:
  [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

  I need to download the zip package.
  Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• Satellite P100-188 - cannot use the LAN driver listed on the download page

  Hello

  I've recently changed this laptop Windows XP MCE. I got all the drivers out of the Toshiba download except the network card page. Both versions, it lists only containing an 'uninstaller '.

  Does anyone have any ideas where I can get a driver to make this work?

  Kind regards

  Matt

  Download the driver and extract the contents into a new folder created. Please enter the LAN card properties in Device Manager and choose the option to install the driver. Asked about the driver choose navigate to this new created folder and see what happens.

• Cannot use the Exteranl USB with Windows 7 floppy drive

  I have a removable disk drive 3.5 inch USB connected to my computer running Windows 7.  When I plugged it there was the usual beep that had plugged in an external drive and only came a message that the drivers were installed correctly and the drive is ready for use.  However:

  a. the player is not visible in Explorer, but appears in the Disk Manager and control panel (material & sound-devices and printers).  It "works" according to Disk Manager.

  b. when I insert a floppy disk, nothing does not appear in the Explorer

  c. I tried without success drive letter assignment (miss me something here, I think and need for a better prescription to follow)

  I saw a post elsewhere on the "group policy objectives" but got lost in the talk of technology and could not get something resembling the description in the post.

  Suggestions, please, which will help to get the job of the thing.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you can not use the floppy drive external USB on your Windows 7 computer.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1. have you tried another USB port using the USB floppy? If this isn't the case, I suggest you try to use it in another port.

  2 have you tried to use the USB port on a different computer/machine? If not, try to use it in another computer.

  This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:

  Method 1 : Troubleshooting hardware and peripheral

  Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

  1. open Control Panel

  2. click Troubleshooting and select the option to display all on the left pane.

  3. click Troubleshooting of hardware and devices and follow the prompts.

  Try Method 2, if the problem persists

  Method 2 : Install the drivers in Compatibility Mode

  I suggest that you try to download the drivers from floppy drive designed for Windows XP or Vista and then install it in compatibility mode.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Used the external drive for catalog/photos for months. Yesterday-> error msg: "LR cannot open the catalog"StanLRCatalogRepaired"on"Seagate Drive - LR Photos"because LR cannot save changes to this place. LR catalogs cannot be opened on removable disks,

  Used the external drive for catalog/photos for months. Yesterday-> error msg: "Lightroom can't open the catalog named"StanLRCatalogRepaired"located on the 'Seagate Drive - LR Photos' volume because Lightroom can't save the changes to this place. Lightroom catalogs not opening on the network volumes, removable storage, or read only volumes. »

  The first thing to do is to check if somehow the permissions for the drive Seagate or any of its relevant folders/subfolders has changed somehow (an OS update maybe?)

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Can satellite P300-20R - I use the latest drivers from site Web AMD/ATI?

  I got a Satellite P300-20R now I want to update the video card drivers - ATi HD4650.

  Can I use the latest Catalyst for the mobility card that I find on the AMD/ATi website, and what is the procedure?

  Toshiba drivers are tested and adapted for certain graphics cards. Driver Toshiba will not force the graphics card to run the highest level and therefore protect laptop from overheating.

  On my Satellite P300, I use Windows 7 32 bit and driver Toshiba. It runs stabile and I'm happy with it.

  To be honest I don t want to use ATI driver and unfortunately cannot give you an answer to your question.

  Can you please tell us which of operating system you are using and what version of driver you want to install?

• Cannot find the display driver just after the replacement of the GPU on Satellite P200

  I got my laptop yesterday to SAV, because my graphics card has been damaged.

  Now I can start Notepad, but in the hardware Manager is only an entry for the VGA, the new map, which should be in the notebook, the Manager cannot be found.

  I tried to find it with the plug-and-play, but with no result.
  The system is only VGA... After that I tried with a catalytic ATI 8.9 driver. But after installing it do not work too (I restarted the NB)

  May I use the wrong driver from ATI, but I can't find an entry for Mobility Radeon HD 2600.
  Only Radeon 2600 Hd. I'm not sure; This driver also works for mobility?

  Can you give me a link to the correct driver?

  Hello

  First of all, it would be interesting to know what series of laptop you have.
  Then you are sure that another graphics chip has been used?
  Are you sure that it is a Mobility Radeon 2600 HD graphics card?

  If you are not 100% sure I would recommend contact the technician who changed the GPU and seek clarification; What GPU chip has been used and where to find the driver.

  I'd appreciate some feedback from you!

• Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

  I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
  I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

  Hello

  You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

  Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
  Sat Pro L10
  Satellite L10
  Satellite A50 and A80 (6.14.10.3943)

  Good bye

• Can not install the latest driver from Intel on my Satellite Pro U300-10 display

  Hello

  Intel has recently, a new display driver, which I think is useful to me because it won't let me play games that require:
  Pixel Shader PS1.1
  Vertex Shader VS 1.0
  "Act of war" and others.

  The pilot is the revision of the pilot: 15.12.4.1666, March 5, 2009
  It is supossed to be the latest driver for the video card U300: MOBILE INTEL 965 Express chipset family.

  The problem is that when I try to install, I have an error that says: "not for this system, ask your provider manufacturer.

  How can I install or where I could find the solution?

  I have TOSHIBA Satellite Pro U300-10 with Windows Vista Business 32.
  MOBILE INTEL 965 Express chipset family
  MOBILE INTEL GMA X 3100

  Thank you much in advance.

  DCARL

  Drivers designed for laptops are changed and adapted to provide performance fairly, but not to force a graphics card to run on the limit. As you probably know there are big difference between office and mobile graphics cards.

  Desktop graphics cards have no limits with cooling and drivers can be updated very often. Design of portable computers is completely different and all hardware components are placed on the square. The common problem with laptops is to design the system of cooling, small but effective.
  Because of all these reasons, display drivers must be tested and adapted by the laptop manufacturers. The main point is to protect the material. The same situation is with other manufacturers of graphics card. They don't offer drivers for laptops.

  If your graphics card will blow that will be responsible for this Toshiba or Intel?

  By the way: Satellite Pro U300 is for me a laptop of small business and certainly not designed for games. Do you agree with me?

• Satellite U300-14 b: can I use the graphics driver for the Intel page?

  My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.

  The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.

  I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.

  Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?

  Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk

  > want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
  Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.

  Best regards

• Cannot use the functions F1-12 on my Satellite C55 - A - 19 K

  Hello

  Satellite C55 - A - 19 K have a keyboard drivers?
  I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
  Any 1 can help please?

  This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
  What operating system do you use?