Portege R700 and Win 7 Port Replicator Support

Hello

Just one running Windows 7 Pro 32 bit on a R700 and use speed duplicator Hi? Not a party PA3838D-1PRP.

I read on a site of exercise there is no Windows 7 drivers for port replicator.

Thank you

As far as I know you don t need any special port replicator driver. If this port replicator is defined as compatible for your laptop model and that you use original Toshiba recovery image it will be recognized automatically and you will be able to use all the available ports on this port reflector.

Tags: Toshiba

Similar Questions

  • Portege R700 and Win 7 Update detects not SP1

    Hello

    I have a Portege R700-1E8 with Win7 Pro.
    WinUpdate detects no SP1, but it has detected the other updates and installed their (the SO is enabled).

    If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.
    Yet, I picked up the phone to the original state and tried to detect the windows updates again.

    There are many upgrades available, but without SP1 AND IE9.

    Any ideea?
    Thank you

    Costin

    Hello

    > If I install SP1 manually (downloaded as iso from Microsoft Download site file) it seems to be installed without problems.

    So where is the problem if you were able to install SP1 manually?
    I had also some problems to install the patches in the past, that I could not install patches after system reboot and disable a 3rd party firewall, I could install necessary updates who received automatically by Windows 7.

    However, SP1 can be installed manually and it should be possible to install other patches automatically, so in this case, I wouldn't be worried

  • Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

    Hi all

    I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

    I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
    Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
    No mouse, no keyboard, and no USB key.

    When I start my Portege I must enter a password after you press the power button.
    These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

    If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

    I ran Windows 7 Enterprise on the Portege.
    BIOS version is 3.30

    Do you have a solution for me?

    Hello

    The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
    You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

    Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

    By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

    Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

  • Difference between Portege R700 and Satellite R630

    What is the difference between the two models, Portege R700 and Satellite R630?
    Is it only fingerprint, port dock station reader and a more powerful configuration (CPU, SSD, WiFi 802.11n, Type)?
    Is this the same materials used body? Is it the same weight?

    I found this comparison:
    [http://www.ultra-laptops.com/comparisons/toshiba_portege_r700-s1330_vs_toshiba_satellite_r630-131]

    Hi snicker_1,

    There are many differences between these models and also, there are different R700 and R630 models on the market.

    In my opinion, you should check these notebooks from Toshiba Web site. There you can see what models are currently available and the configuration.

    Satellite R630 page:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/B2C-satellite-R630

    Portege R700 page:
    http://EU.computers.Toshiba-Europe.com/innovation/generic/B2B-Portege-R700

  • Portege M400: Port Replicator support DVI and analog monitor

    Hello

    I use my Toshiba M400 in the duplicator.
    The duplicator has two outputs to a DVI and an external analog output display.

    I would use both screens at the same time under Windows Vista RC1.
    The port replicator manual mentions that this should be possible depending on the connected computer.

    "According to the computer connected to the port replicator, you can connect external monitors to DVI port and the port external monitor and display on both screens at the same time."

    Someone he knows the M400 which supports? I only get the external DVI monitor or at work.
    (He used to work with my old others and this function was just great).

    A big thank you in advance.

    Rogier

    Hello

    I'm not sure but pretty sure you cannot connect two external displays at the same time due to the restriction of graphics card for laptop to 100%. You can stretch relative to your office for two screens (one internal and external) or have the same image on laptop LCD and external TFT connected DVI or RGB port.

    If I read the sentence you have posted I realized you can use two ports (according to specifications) and use two screens on the same time screens (laptop screen and an external).

    All available modes to switch the display to the external one, you can check with the combination of keys FN + F5 or in change of display tab tool mobile extension of Toshiba Service.

  • Win 10 Portege R700 and R930 works but wher is the BIOS?

    I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
    -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
    -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
    Otherwise W10 works well...

    / Anders

    Well - I found the answer to the first question - how to enter in Bios in W10 - energy options that you must disable the quick start - then you enter BIOS just taking the F12 to power. Worked on my two Portégé.
    / Anders

    I installed W10 on my R700 and R930 successfully - but I have two minor I have questions can´t address:
    -I can not enter the BIOS - the road via advanced settings - start - troubleshooting - repair etc does not work. How can I enter BIOS in W10?
    -J' I try to update my Intel drivers through the Intel driver utility to update - but when I run this app - the App are not able to identify the Intel on my Porteges two drivers - how can it be possible? In the system information, can I see information about Intel processors - how is this possible?
    Otherwise W10 works well...

    / Anders

  • Portégé R700-14 days - Express Port Replicator II-Compatible?

    Today, I received my TOSHIBA Express Port Replicator II (PA3680E-1PRP) to use with my TOSHIBA Portege R700-14 days (PT311E-023006DU). I seem to be unable to break the laptop easily into the docking station.
    Please let me know if this port replicator docking station is * the right * for the Portégé R700-14 days.

    Thank you
    Bert van Loon

    Hi mostlymedia,

    I searched a bit using Google and I found that Port Replicator II is compatible with Portégé M750 and Tecra A/M/R/S series but no information on Portege R700 :(

    I think you should ask the ASP in your country if it s the right part or not until you make a mistake.

  • Display problems on Portege M100 connected to the port replicator

    After having connected the M100 to a port replicator, I meet the following:

    Sometimes the first couple of seconds, the external screen is used.
    When Windows XP Pro login screen, external monitor off running and only after the opening of the TFT screen, I can go back by pressing Fn - 5.

    Another question:

    A minute later, after starting windows at 1024 x 768, the Exchange System suddenly resolution
    to 1280 x 1024.

    I manually switch back to 1024 each time, but the system uses 1280 after a reboot.

    Do you have any idea how DIFFICULT 1024 and how to maintain external when it is docked?

    Thanks

    Hello

    I put t know 100 percent how this fix several issues, but you should first check if updates will help you.
    For example, to check on the Toshiba page if the new BIOS, driver card graphic and display Service for external monitor.

    How the words on the display for external monitor Service:

    1.) description of the problem:
    The Intel display driver has a characteristic, as one of its characteristics, to store used display to system shutdown before and use the device to display the images when the system starts the next time, as long as the device is.
    However, this specification has attracted a large number of complaints that images were not displayed on an external monitor, but on an LCD, if systems have been used in the following way:
    1. turn off the system with the images displayed on a LCD screen.
    2. with the LCD closed, anchor the machine to a longshoreman who has a connected CRT monitor.
    3. turn on/off the system will display images on the CRT, while the system is starting.
    However, the display driver will switch the display device on the calendar in Windows JOURNAL to the screen and displays the images on the LCD screen, which is the previous display device.
    4. from the screen LCD is closed, the user will never know where the images are displayed.

    2) corrective action: update the BIOS on V1.30 or more and install the TOSHIBA display driver

  • Portege 3440CT: Question about media port replicator

    Hi, sorry for my English...

    I have a question:
    I'm looking for a multimedia for my laptop port replicator.

    Do not include the port replicator (PA3042E-1DST) I found a driver for cd/dvd...

    Can I install a standard cd or dvd slim in the multimedia duplicator?
    Or he needs a car?

    Thank you.

    Hello

    I think that you need this one: PA3042E-1DST Multi Media Replicator Port, but according to certain specifications, this port replicator can be used with different options. This means that you must PA3014E - 1DVD DVD Drive Kit or PA3015U-1CDD 24 x CD-ROM Drive Kit II.

    That s all I found.

  • The PA3508E-1PRP Port Replicator supports wide screen resolutions?

    Hi all

    I think to buy a Tecra M9 - 14 FT 7800 (with the NVIDIA Quadro NVS 130 M - 128 MB graphics card) - will, in combination with the Replicator to ports Express PA3508E-1PRP let me fully to use an external monitor with a resolution widescreen native 1680 x 1050 over DVI?

    Thanks in advance,

    Ben.

    Hello Ben

    Unfortunately I can't give you the exact answer, but I'm a bit skeptical about it. As much as I know Port Replicatior has no influence on the signal because the signal from the laptop will just looped through. The question is what resolutions on external screen will be supported by the graphics card for s laptop.

    IN the document s user Tecra M9 manuals I found track information: as the operation of the port of all monitors DVI (Digital Video Interface) could not be confirmed, some matte DVI monitors will not work correctly.

    In any case, as far as I know as Tecra M9 comes with Intel 965 GM graphics card and we're working on how to get the resolution widescreen 1680 x 1050 on external display.

    If you need help with this please write again.

    Good bye

  • Portege R700 and dockstation, built-in screen starts black

    My laptop is a R700 with a docking station. Windows 7 x 64.

    If I start laptop anchored, can be seen on the external monitor and the built-in lcd screen.
    If I'm undocked stars, starts windows and lcd goes black. It is out for external monitor if I connect one expiration correct lcd.

    Swtiching function keys doesn´t works, as if undertand lcd is correct (but there is only a black lcd screen).
    Updated to the latest version of the video and to change versions (aug2012) we get the same result: black lcd.

    If uninstall video driver and set the driver standard vga works well, but there is no switching function key to use the external monitor.

    Did anyone here with same problem?

    If the video signal has been set to external monitor using Fn + F5, you will need to use this combination of keys again to return to the internal display.

  • Display problems with the Portege R600 and Win 7

    I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

    I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

    It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

    A refresh solves it.

    Anyone have any ideas?

    > I have an external monitor attached and get the same problem with or without him.
    Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
    It would be the worst case, because that would mean that the motherboard needs to be replaced

    But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

  • Port Replicator to the United Kingdom will work with US Portege R830?

    A Port Replicator to speed in United Kingdom Hi (PA3838D-1PRP) will be compatible with the laptop Portege R830 American version?

    I guess you're meaning that this port replicator
    http://www.Toshiba.co.UK/discontinued-products/pa3838d-1PRP/

    It is mentioned that this Port Replicator is compatible with Portege R700 and Portege R830 series.
    European, along with Americans and Australians are very similar to each other so the port replicator, must be compatible.

    But I guess you need an AC wall adapter for plugging the European system in the United States

  • Need Advanced Port Replicator III drivers for use with my Portege M300

    Hello

    I have a Portege M300 with an Advanced Port Replicator III. I had to reinstall the operating system and now can not find the drivers for the port replicator.

    Can someone help me? I am running Win XP

    Thank you

    Hello

    I guess that you need drivers for the XP operating system. Am I wrong?
    You will find on the page of the Toshiba driver all drivers needed and utilities for Portege M300.
    You will also find the installation instructions document. This document shows the proper installation order.

    You simply download all the drivers and follow the order of installation. All that s

  • Portege M750 on plu III Advanced Port Replicator

    The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

    Hello

    I discovered that the Express II port replicator is compatible with the Portege M750.

    I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
    http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

    However, the M750 Poretge is not listed as a unit compatible and taken in charge.
    So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

    Welcome them

Maybe you are looking for