Portege R700 Bios update problem - this computer is not supported

Similar Questions

• Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

  Hello

  My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

  I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

  I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

  So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

  Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

  Thank you for all!

  Axel Limousin

  Hello

  You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

  Disable the Antivirus software and disable things of security such as firewalls etc.

  Hope that you're lucky...

• Re: update the Bios Z830 Satellite: "this computer is not supported.

  Hello

  I replaced the Windows preinstalled with an installation of Fedora 16, - which works perfectly btw - and hope
  to solve the "Windows only Bios update problem" with a Windows 7 bootable USB drive, which works again
  great so far, but the BIOS160_EC130_WIN.exe said simply: "this computer is not supported." ...

  Any ideas appreciated.

  Bernd

  Hello

  You cannot update the BIOS under Linux and using a victory based version of the BIOS.
  You will need to use the image of preinstalled Toshiba.

• Portege R700 - BIOS-update 2.20 - WIN does not work

  I have a Portege R700-172-PT311E-03201KGR
  It's a WIN 7 64 bit Machine.

  Current BIOS 1.70
  EC-current Version: 1.40

  For this machine, an update of the BIOS and IT's there.
  So I downloaded the "BIOS220_EC160.exe" update and tried to treat.

  The first message during the update process is: "it is necessary to update the BIOS and THIS.
  When I continue with "Run the update", I get the error message:
  "Error: preparation of updated failed.
  Given the image file is not compatible with this cimputer.

  There is no change in the material of the machine. The only problem I see is that we use McAfee Endpoint Encryption (V6.0.2.6) that could have some influence on the update of the BIOS.

  But I'm not sure.
  Does anyone have an ideas?

  Hello

  BIOS update is important to you?
  Do you have problems with the laptop?

  I have portable three-year-old BIOS was did not updated

  However, AFAIK the VAP (value added package) must be to get the updated BIOS updated. Also the firewalls and other security and antivirus preinstalled on the system software must be disabled before attempting to update the BIOS.

• Tecra A10 - 12 H - update BIOS: "this computer is not supported"

  I need to upgrade the BIOS v 1.60 to the latest version of the BIOS. I downloaded from the site of Toshiba bios file (bios - 20091103164158.zip-> P0065v300.exe), but when I try to update comes this question:

  TOSHIBA BIOS PACKAGE VER 3.3.0
  THIS COMPUTER IS NOT SUPPORTED

  My laptop:
  TECRA A10 - 12H
  PTSB1E-01E003IT
  Windows 7 32 bit

  Hello

  Have you installed the VAP (value added package)?

  The VAP is necessary in order to run the BIOS update and Toshiba tools.
  I found a son with the same error message, but the user is using Win XP.

  The problem could be solved by the installation of common Modules (only for Win XP).
  But the VAP is released for Vista and Win 7 and common modules are in the VFR package.

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• Tecra M10 - update of the BIOS says "this computer is not supported.

  Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

  Package for the TOSHIBA BIOS ver.3.3.0
  This computer is not supported

  What can I do? Its supposed to be for this model!

  Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

  Hello

  Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

  The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

  If this driver isn't installed, the update of the BIOS would not work.

• Qosmio G30-126 - update Bios message: this computer is not supported

  When I try to install the bios update, I get the following message: this computer is not supported.
  I use win xp pro sp2 and the update of the Bios I downloaded from the Bios Toshiba Update section.

  You try to update the BIOS that is not designed for this laptop!
  If you want to perform an update of the BIOS make sure the BIOS is fully compatible with your notebook series and good!

  Notes; bad BIOS or bad BIOS update procedure can damage the module ROM!

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• Portable CQ58, disk recovery "this computer is not supported by the system recovery media.

  Hello HP,.

  I have a laptop CQ58-bf9WM, which had Windows 8.1.  The 320 GB hard drive died and bought a new SATA 500 GB laptop.  had no CD recovery, went online, enter all the important information, serial No., model #, then purchased through HP recovery disk, received the CD (manufacturer 708896-001, 708895-001 708897-001) and put #1 disc in the CD started and that's what I get: this computer is not supported by the system recovery media.  You will not be able to continue to recover this system with these media.  "Error: 0100-169-1855-188 b" then you have the OK, then when you press OK, the laptop shuts down.  I pressed ESC on POST, then I tested memory and the new hard drive and they both passed.  HELP PLEASE!  Thank you

  Should not have anything to do with the new hard-both disk that is at least equal or greater than original ability, they work. It is 'possible' that you have received the wrong set of recovery.

  Thing of OE to check. Enter the BIOS by pressing F10 immediately after turning on (have to press ESC, then F10 to the menu). Is the serial number, model number.etc all intact?

• Get the Message After that recent Windows 7 update for this computer is not running Genuine Windows

  I bought this directly from computer to DELL 9 months ago. After the last update of Windows 7, I get the Activation screen pop up:

  "This computer is not current running Genuine Windows"

  I tried some of the suggestions on the community forum - did not work.

  I tried to re - activate Windows by phone - rejected

  I tried to follow the directions on the error screen - unfortunately, I seem to get lost in an infinite loop, tried to contact MS Support by eMail... I can never get the screen to contact technical support by email.  I'm trying this.

  This is the form of the output of the MS Genuine Advantage Diagnostic Tool:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {DF706470-8353-4FE0-BF91-B476B1CC9AD5} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.160121 - 1718
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office Professional Edition 2003-114 blocked VLK 2
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {DF706470-8353-4FE0-BF91-B476B1CC9AD5}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3549810005-129049543-177520327Dell Inc.. Inspiron 3847 Dell Inc.. A06 20150115000000.000000 + 0005BFC3507018400F404090409Mountain Standard Time(GMT-07:00)03DELL WN09 114114Microsoft Office Professional Edition 20031159D1605114E3500vfZmaSmFPIYrLWTcZSZErUQg Fo plus73931-640-0000106-5735514

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7601.0000-1252015
  Installation ID: 001012827913503504119443300805063884364523993301059480
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 16/02/2016 10:26:03

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000010240
  Event timestamp: 2:11:2016 10:23
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAEAAAACAAAAAgABAAEAln1 + zOI4/OXyG2qmZoCBP/rNYBDI9g is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  FPDT DELL WN09
  ASF! INTEL HCG
  WN09 DELL SLIC
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  MSDM DELL WN09
  LAURENCE INTEL HSW

  Thank you for your response.

  This is on a DELL computer.  I contacted DELL support and they have a bulletin on the basis of their knowledge.  The bulletin has a number of solutions for fixing this updates the BIOS including instructions, and updates the driver Intel.  For me, the update of the BIOS seems to have solved the problem.

  http://www.Dell.com/support/article/us/en/19/SLN104591/en

• Windows Virtual PC cannot start because this computer does not support virtualization hardware-business intelligence

  I have a Sony Vaio VGN-NW235F and I am a student in the it field. A lot of my software are not supported by Windows 7. So I upgraded my Windows 7 Home Premium to Windows 7 Professional so that I can run Virtual PC. But I'm not able to run due to the above error...

  Please kindly help me

  Thanking you,

  Paths

  Salvation of the paths,

  Looks like you are trying to get XP Mode configured, that will install a virtual machine for you to run your legacy programs.  This feature is available in the professional versions, full and Enterprise edition - so your property in this aspect.

  You get this error message because you do not have the chip installed for hardware - assisted virtualization technology and it's good. you don't need more.  Click on this link http://www.microsoft.com/windows/virtual-pc/download.aspx and select your language and edition.  Then scroll down to step 3.  You must download and run the third component called Windows XP Mode Update. This update will remove the requirement that you have the chip mentioned above.

  That should do the trick.

  Barbara

• Help! How to "downgrade" this update? This version is not supported by a computer program that I use for work. Thank you!

  Is there a way to uninstall the update of Firefox? I already had a problem with this program because it was not compatible with the latest version of IE.

  Hey jpgaprilfool,

  There are many benefits to the latest version of Firefox. Out of curiosity, what program is not compatible with the new Firefox? You should consider your comments for developers so that they can continue to improve the product.

  If you want to roll back to a previous version of Firefox, just take a glance section of the Knowledge Base install an older version of Firefox.

  Hope this helps!

• Qosmio G30-162 - BIOS update problem

  Hi, I have a problem with the update the BIOS on a Qosmio G30-162, which seems to be running the following version: -.
  Version 1.20
  Version 2.3 of DMI
  Date of the BIOS 21/01/06

  Whenever I run the update V3.90 it is said that it is not valid for this machine.

  Anyone know how to fix this?

  Thank you very much

  The BIOS update I'm running is V3.2.9 (P0038v390.exe)

  When I run the files of the update says that "this computer is not supported.

  Thank you very much

  Hello

  Do you have what Windows OS installed?
  If you have installed Win XP then the common Module must be installed before trying to update the BIOS.
  If Vista is installed, the VAP (value added package) must be running.

• Error "this Setup does not support the target platform.

  I need solve the problem 'this Setup does not support the target platform' Please help me :'(

  See these two sites:

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/this-installation-does-not-support-the-target-platform-t59001.0.html

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/firewall-wont-install-this-installation-does-not-support-the-target-platform-t61629.0.html;msg434058

  Comodo is apparently the problem.