Portege R700 - keyboard cover

Toshiba or someone else to do a keyboard for the R700 series cover?

I want to preserve my laptop in State up, so wear the buttons is something I want to avoid with one of these translucent rubberized covers that I've seen for other laptops

see you soon

Ben

Hi 1994F7PT,

As far as I know Toshiba doesn't offer this keyboard covers. I did a Google search for keyboard covers Portege R700 and I found a few offers, but for US keyboard. Maybe you can find a few keyboard covers for keyboard R700 and EU. Also take a look on eBay, you can also get a lot of laptop parts.

If you have found something you can post it here. I'm sure that it s interesting to other owners P700! :)

Tags: Toshiba

Similar Questions

  • Portege R700 - part number for the Hebrew keyboard

    Someone can help me with the part not for Portege R700 Hebrew keyboard or how can I found it?

    Thank you

    Hey Buddy,

    It of Nice that you ask here for help, but he s user in forum. I mean there's no one here a list with the exact reference numbers so I think you need to contact a service provider authorized in your country. Guys can tell you the exact number for this keyboard you want and order for you.

    You know the contact address of the nearest authorized service provider?

  • Portege R700 - how to clean the keyboard keys?

    Hello
    I have a Toshiba Portege R700 - and I spilled coke on a small part of the keyboard.
    Not surprisingly, the two or three keys are now "sticky."

    Is it as simple as access to the keyboard and the relevant keys of cleaning?
    Or is it not that simple?
    If I can do this, is there a pictorial guide on access to the keyboard?

    I'm reluctant to open first without consulting the tech manual.

    Thank you

    Hello

    In my opinion, you will not be able to clean it properly. Coke is full of sugar. It can be complicated, but you can try it.

    In the worst cases, you must exchange he keyboard.
    So what you need to do is to remove Cap key for each critical button. It is set with small farmers in plastic. Just take something like the credit card but more stabile, put under the key cap and try to remove it. Under the key CAP is little key mechanism. Try to clean it with a damp cloth. Be careful and clean without a lot of pressure.

    When you think it's OK place the key cap and press it very gently of course.

    You'll hear the clicking noise and the cp key should be up again.

    I hope that you will be able to make it work again.
    Please post comments.

  • Replacing the drive HARD on Portege R700

    Hello

    I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.
    Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?
    What size hard disk will - 2.5 "or 1.8"?
    A SSD will be simply connect using existing connections, or something else there?

    See you soon.

    According to the specifications of the laptop Portege R700 has 2.5 HARD drive is HDD with SATA interface, so I think that you should order 2.5 SSD with standard SATA connectors.

    HARD drive is placed on the bottom side near the cooling vent and it is fixed with a screw only.

    Remove the screws and HARD drive. You will see how the HARD disc is placed and how it must be removed.
    It's very simple and you can do it alone.

  • Portege R700, Windows 7, mounted sudden fan/cpu, freeze and force stop

    Hello

    I have a persistent problem that starts to become annoying... Portege 700 running Windows 7. Normal use (office, WMP, IE anything heavy)

    No apparent reason (no new requests started for example), there is a sudden increase in the speed of the fan which should be max (looks it takes off) and I suspect use of the processor at the same time. And it's that it's not simply to stop (I left for awhile on occasion) and does not match an input (keyboard or mouse). The only 'solution' is to use the power button to force a shutdown. (And then I lose all cookies etc. when starting again).

    I did a lot of Googling on that. Thought it was WMP network sharing Service and has taken measures to see, but have recently disabled that service and still the problem occurs... (I checked that it is always disabled when just rebooted).

    I keep as 'clean' as I can (have AV installed, use ccleaner regularly etc etc) so would be surprised if a virus/worm, but am running a scan again just in case...

    This happens quite often be a pain - and I have no idea what is the cause, if any ideas gratefully received.

    Thanks in advance.

    Tim

    Hello

    I m no owner on the site Web of Toshiba Portege R700 but I found an article that describes EXACTLTY the same problem. High activity of its use and CPU fan, then it freezes :(
    Here is the link to this article:
    http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

    As you can see, update the fingerprint software could help get rid you of this problem. :)

  • How to replace the hinge on Portege R700 screen?

    3 weeks after getting the R700-1F7, cover money on the hinge of the screen fell and I lost it.
    Dirty looks, visible son, dust stake.

    Can anyone tell how to get a replacement part?
    Can I stick it on a spare part myself?

    Thank you!

    Hey how old is your Portege? Warranty is still valid?
    I mean that if the warranty is still valid closest contact to let and Toshiba service provider exchange the broken parts.

  • Portege R700 - how to replace the optical disk drive?

    Hello
    I would like to replace the optical disc drive (ODD) with a Solid State Drive (SSD) on my Portege R700.
    So my first question is: what is the way to remove the STRANGE?

    And my second question is: can I replace it with a Caddy drive HARD ICY BOX IB-AC642 or Akasa AK-OS2SSA-BK?
    Interface SATA caddy fits with the WEIRD interface?

    Thank you for your answer

    Hello

    It s really complicated because the STRANGE is placed inside and remove it you must remove all the screws that fix the bottom cover.

    I wouldn't, because you will lose the warranty.
    More I doubt you could get the second HDD to work in ODD Bay.
    I think that this is not supported
    Just the laptop s as Portege M400, M700, M750, Tecra M9, S3 or S4 with a select Bay slim support would treat the 2nd HDD instead of ODD.

  • Portege R700 - some buttons not response

    Hello

    I bougth Portege R700 and now I'm in trouble.

    the button to turn off the touchpad that does not work.
    the button on the right top of the keyboard (the Green key), do not pass the pc from normal to eco, but open windows Mobility Center.
    When I press th FN key + others like volume, for example, I have no information on the screen.

    also why ligth for wlan is always also activate when
    I disable the WiFi (orange ligth under the touchpad)

    Thank you
    I have reinstall PVAT, but nothing changes.

    Please could you help me to find all the functions of my laptop.

    runs in WIN7 x 64 french.

    Thank you.

    Post edited by: sapeur3873

    There are too many different questions and if you try to fix one, it will take too long and there is no guarantee that you will have success with it.

    Best thing you can do is to restore laptop to factory settings and start using it for laptop with out of the box. After doing this in a first time check it and make sure that everything works correctly.

  • My MacBook seems to run hot: a keyboard cover will make it worse?

    My MacBook Pro seems to often very warm to the touch. Does anyone know if placing a keyboard silicone keyboard cover will be retain heat even more, possible damaging consequences?

    In this regard, including at - it an app that can tell me if it works too hot? (I SMCFanControl, that shows me the fan RPM and allows me to control, but his screen usually something like '32˚ F', even in the summer - I'm not sure what said me).

    Thank you!

    Try to install this app for tem and fan speed monitoring and fan control

    http://www.CrystalIDEA.com/Macs-fan-control

    The message here a screenshot of what it shows.

    Maybe it's that you have a bad sensor or a problem with the fan speed control

    Also do you have any runaway apps?

    Apps can affect the performance of Mac, battery, temperature and fan activity - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Keyboard cover M

    Hello

    I have a retina display 13 inch. I was just curious to know if the keyboard cover could melt or produce hazardous fumes when the mac has heated up. This is because sometimes the mac feels very hot to the touch and the cover of the keyboard still feels warm. Therefore, I wonder if it is possible that the keyboard cover do melt or produce hazardous fumes when the macbook heats up to a very high temperature?

    Concerning

    Yednap

    I would not use a keyboard cover.

    Just keep liquids off the Macbook Pro.

    Best.

  • Portege R700 - cannot activate the top modem mobile broadband

    Hi all!
    I have a big problem with my Portege R700 with Broadband Modem built-in.

    I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

    Where the new driver for FN Options?
    How is the correct name of this option?

    I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

    None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
    He worked perfectly but after the installation of the new 2 weeks no chance.

    * Issues: *.
    *.) don't see a modem mobile broadband in hardwaremanger *.
    *.) FN F8 show no option to activate the modem

    Help me please - it is an urgent problem because I need this laptop for businesses. :(
    KR
    Philipp

    > do not see the modem mobile broadband in the hardware Manager

    The question is: did you buy a Portege R700 with a module 3G?

    I m asking because different Portege R700 were released with different specifications.

  • Portege R700 - impossible to pass to Windows 10

    I have a Portege r700 with original Windows 7 OEM installation.

    Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

    The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

    After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

    I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

    I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

    Any idea?

    I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
    concerning
    / Anders

  • Portege R700-19 t - new RAM-> start is no longer

    Hello together,

    so I bought two new RAM sticks for my old laptop
    Toshiba Portege R700-19 t

    But since I installed them, the machine does not start in an operating system more.
    The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

    The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

    The next thing was memtest86 + v4.20:
    It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
    I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

    In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.

    Plug portable-mem from toshiba:

    • Standard: 4 (2 + 2) GB
    • Max Speicherausstattung: 8 GB
    • Technology: DDR3 RAM (1,066 MHz)

    link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

    Cannes-old (work) ram:
    2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

    new RAM sticks:
    2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
    link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

    In my understanding of both new sticks should work well with my laptop, or am I missing something?

    concerning

    For me, the question is clear enough; the laptop does not start because of new RAM modules.

    The new RAM modules are not totally compatible, or the RAM modules are defective.

    I recommend you test an other modules; for example modules manufactured by Kingston.

  • How to reset the sensor of fingerprint on Portege R700-174?

    Hello!

    my "problem":

    on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

    all systems are protected by password and fingerprints.

    also the win10-test system (for test prints digital-utility in win10)

    now, I deleted an old generation of win10 and do a new install with the latest version

    Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
    to be entered for the new win10 (or any other system)

    My question

    is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
    Fingerprints for this system, which does not exist anymore on my portege?

    Thanks for the tips

    Kurt

    The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
    http://www.MyToshiba.com.au/support/items/FAQ/386

    In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

    See also another thread:
    https://Forum.Toshiba.EU/showthread.php?75917

  • Portege R700-S1321 - cannot set the resolution of 1366 x 768

    I have exactly the same problem, as shown in:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

    The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

    Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

    External monitors very well with the laptop work.

    Its 2.20 BIOS execution that seems to me later.

    It seems that the intel driver must get some information that is incorrect.
    Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

    I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

    I also tried to restore from the recovery many times discs without success.
    During the installation of windows occurs, the screen is fine.
    When Toshiba additional programs are added to the screen returns to the 1280 x 700.
    I suspect that what happens when the graphics driver intel is installed.

    If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

    Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

    Any idea is appreciated. Thank you.

    > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

    I think you are on the right track, and I think that his untimely pilot.
    That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

    PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

    The latest Intel HD driver can be downloaded directly from the page of Intel:
    [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

    I need to download the zip package.
    Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.

Maybe you are looking for

  • Dynamic screen low level Sub vi high-level VI main road

    I have a program VI that inturns calls a lot under vi mode step by step. I need to display the path of lowest level vi in the top level vi main. (here in my program, I have 3 levels of void / vi) and I need the path least void level vi to be disaplye

  • single-precision changes constant value

    See attached 'vi '. If I set a digital double precision on my schematic, change it to SINGLE-precision, then enter the valeur.001 inside, he adds values to the right of the decimal point. Why would he do that? I'm using Labview 2011 SP1.

  • Can not install the distribution of other users

    Hi, I tried to install the Distribution packages generated by 2 users of CVI 2009, but they all fail. If I generate a distribution in my machine, it works fine. Any way to trace what happens during the installation? Thank you

  • The State of Machine table

    I need help store two different measurements in two different tables. Both are in a state machine in the same case, and I need to place them in the tables so that I can use both to get a linear fit. The two values are located in the case of 'Calc' of

  • Windows Mail back my email!

    Windows Mail has returned my email. I've been using Yahoo Mail and somehow all got transferred to Windows Mail. (I must have clicked on something)? It also took all the messages that have been saved out of the server and are now available on Windows