Portege R700 - on-screen display Fn key measures

Similar Questions

• Portege R500 - toggle the display of the laptop to LCD projector screen

  Hello - new here, urgent request. We have a meeting, and I use the Portege R500 for the first time with LCD projector which is also a Toshiba.

  How do the laptop screen display the projection screen? I thought it was function F5 (Fn + F5), but it does not work.

  Can anyone help?

  Hello

  Yes, you must use the FN + F5 to switch to the external monitor or external projector, etc.
  You must first connect the laptop with a projector, while both devices are turned off.
  After connecting the projector you could power the laptop.

  Then try to switch to external projector using the FN + F5 key combination

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Portege R700 - no autorun for CD/DVD and USB keys

  In my Portege R700 there is no way to make autorun works (for key USB and CD/DVD as well). CD/DVD and USB keys work perfectely, but not the autorun.

  I tried to use both the automatic repair of Microsoft and PowerToys, but the problem that it is still there. I also tried to change the registry, but it seems that the changes are not retained. I suspect that it is something related to some utilities or so.
  Can someone help me?

  Thanks in advance.
  Gerlando

  Hey,.

  > I suspect that it is something related to some utilities or so.
  What utilities you have installed? Theoretically, they could block the autorun

  Normally if autorun doesn t work on XP, you can enable it in the Windows registry:
  Start > run > regedit

  The registry editor will open and go to:
  HKEY_CURRENT_USER / Software / Microsoft / Windows / CurrentVersion / policies / Explorer
  Double-click the NoDriveTypeAutoRun value and set the value of 91.

  Now he must navigate to:
  HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / Cdrom

  Double-click the AutoRun value and set the value to 1.

  Now restart your computer and try it again, usually autorun should work again.
  Additionally, make sure that the latest Service Pack is installed for XP (SP3).

• Graphic display of Portege R700 objects

  Display graphic artifacts R700-182, Windows 7 Pro 32 bit, bought Nov 2010 (so under warranty).

  Once the computer has been used for an hour, the product suddenly the laptop screen display artifacts. Usually, these are manifest as one or several repetitions horizontal to the top of the screen but may include other artifacts such as reverse color blocks. Artifacts appear and change the keyboard or the mouse, click on actions, but will never disappear: the screen becomes unusable in this State. The display will return to normal if the 3D vertical sync to the Intel graphics adapter setting is changed, but the artifacts come back almost immediately. Rebooting the computer returns the display to the normal state, but an hour later they reappear. Seems to be the time rather than heat related.

  Display objects appear only in certain applications. Word 2003, Excel 2003, Powerpoint 2003 are still affected. Outlook 2003, Internet Explorer is not. No artifacts with movies. I might post some example screenshots (if I knew how).

  The problem was found in all States of connection (wireless power, LAN), except when connected to the local LAN and power via a port replicator (Toshiba), but in this case, tests don't have not been extended. No external monitor is used. Display drivers have been updated with no change in display objects. Software AV is up to date, working properly and reported no problems. Any ideas what it is- or is it a case of warranty return?

  In my opinion you should not waste your time with some tests or something else. Laptop is not so old and should work perfectly.
  Contact the nearest Toshiba service provider in your country and ask for help.
  They can test your laptop with diagnostic tools and help you if there is a serious hardware problem.

  Do you know how to find the right address or phone number?

• Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

  Hello

  I got a Portege R700 with Windows 7 64 bit.
  This machine starts very slowly after the log in user mode only.
  The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast.

  Thus our directors thought it might be the Toshiba Software and a lot has been disabled or uninstalled.
  Because this did not help and because I thought that it migt be cause of Kaspersky, I started to reinstalled and update the software from Toshiba. Most of it works now. Shortcut keys does not work, then I start TfcRst.exe via autostart now, even he would somehow it would be better in 'systemecommencent '.

  But still some keys do not work. The Tablet touch power switch, just above the touch pad does not work.
  The Fn F9 works. And the two keys to the right upper corner (ecoUtility/off button and the presentation-Key) do not work. In all three major, I get a pop up saying "this function not taken in charge.

  Anyone has any idea of this?

  Thank you

  Solomon_de

  Hello

  Why you n t try to restore the operating system back to the same state until the administrator has removed or uninstalled the Toshiba Software?

  Generally speaking the VAP (value added package) controls the multimedia keys.
  Also the FN keys require the VAP and Flash memory card Support utility.

  Welcome them

• Portege R700 - registry key for the FN + F8 key combination

  Hello

  Pressing Fn + F8 to toggle wireless on a R700 - what values of registry keys made this change? Is anyone able to tell me the path of the registry for the wireless feature on of the Portege R700?

  See you soon

  :)

  Hey Buddy,

  The exact registry key knows only Toshiba. I can tell you that the FN keys are controlled by value added and Flash Cards Support utility package.

  These two tools can be downloaded from the official website of Toshiba for the FN keys you need an additional tool and it s not just a simple registry key.

  Problems with FN keys combinations?

• Portege R700 - how to clean the keyboard keys?

  Hello
  I have a Toshiba Portege R700 - and I spilled coke on a small part of the keyboard.
  Not surprisingly, the two or three keys are now "sticky."

  Is it as simple as access to the keyboard and the relevant keys of cleaning?
  Or is it not that simple?
  If I can do this, is there a pictorial guide on access to the keyboard?

  I'm reluctant to open first without consulting the tech manual.

  Thank you

  Hello

  In my opinion, you will not be able to clean it properly. Coke is full of sugar. It can be complicated, but you can try it.

  In the worst cases, you must exchange he keyboard.
  So what you need to do is to remove Cap key for each critical button. It is set with small farmers in plastic. Just take something like the credit card but more stabile, put under the key cap and try to remove it. Under the key CAP is little key mechanism. Try to clean it with a damp cloth. Be careful and clean without a lot of pressure.

  When you think it's OK place the key cap and press it very gently of course.

  You'll hear the clicking noise and the cp key should be up again.

  I hope that you will be able to make it work again.
  Please post comments.

• Hot Key On Screen Display has gone

  Hello

  I have a Thinkpad Edge E520.

  Use the volume and brightness, but the I used to have on the screen display has disappeared.

  I tried everything I could find on the web, still does not.

  Can help?

  Thank you

  Eran

  Hi Tout1108G,

  Thanks for your help!

  I have Windows 7 Pro.

  Problems started when Norton technical support 'played' with the registry to solve a problem, I had.

  I reinstalled the drivers of Power Manager that you recommended and it's ok now.

  Thanks again,

  Eran

• Portege R700-S1321 - cannot set the resolution of 1366 x 768

  I have exactly the same problem, as shown in:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

  The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

  Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

  External monitors very well with the laptop work.

  Its 2.20 BIOS execution that seems to me later.

  It seems that the intel driver must get some information that is incorrect.
  Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

  I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

  I also tried to restore from the recovery many times discs without success.
  During the installation of windows occurs, the screen is fine.
  When Toshiba additional programs are added to the screen returns to the 1280 x 700.
  I suspect that what happens when the graphics driver intel is installed.

  If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

  Any idea is appreciated. Thank you.

  > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  I think you are on the right track, and I think that his untimely pilot.
  That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

  PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

  The latest Intel HD driver can be downloaded directly from the page of Intel:
  [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

  I need to download the zip package.
  Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Portege R700 - some buttons not response

  Hello

  I bougth Portege R700 and now I'm in trouble.

  the button to turn off the touchpad that does not work.
  the button on the right top of the keyboard (the Green key), do not pass the pc from normal to eco, but open windows Mobility Center.
  When I press th FN key + others like volume, for example, I have no information on the screen.

  also why ligth for wlan is always also activate when
  I disable the WiFi (orange ligth under the touchpad)

  Thank you
  I have reinstall PVAT, but nothing changes.

  Please could you help me to find all the functions of my laptop.

  runs in WIN7 x 64 french.

  Thank you.

  Post edited by: sapeur3873

  There are too many different questions and if you try to fix one, it will take too long and there is no guarantee that you will have success with it.

  Best thing you can do is to restore laptop to factory settings and start using it for laptop with out of the box. After doing this in a first time check it and make sure that everything works correctly.

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• Portege R700-19 t - new RAM-> start is no longer

  Hello together,

  so I bought two new RAM sticks for my old laptop
  Toshiba Portege R700-19 t

  But since I installed them, the machine does not start in an operating system more.
  The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

  The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

  The next thing was memtest86 + v4.20:
  It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
  I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

  In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.
  
  Plug portable-mem from toshiba:

  • Standard: 4 (2 + 2) GB
  • Max Speicherausstattung: 8 GB
  • Technology: DDR3 RAM (1,066 MHz)

  link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

  Cannes-old (work) ram:
  2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

  new RAM sticks:
  2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
  link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

  In my understanding of both new sticks should work well with my laptop, or am I missing something?

  concerning

  For me, the question is clear enough; the laptop does not start because of new RAM modules.

  The new RAM modules are not totally compatible, or the RAM modules are defective.

  I recommend you test an other modules; for example modules manufactured by Kingston.

• Cannot use 8 GB in Portege R700

  Hello

  I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

  I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

  I put in the memory which consists of:
  1 x 4 GB PC3 12800
  1 x 4 GB PC3 10600

  The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

  If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

  I tested the ram with Memtest and they pass the tests.

  If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
  If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

  If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

  I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

  Anyone can shed light on the problem?

  Hi Borito

  If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
  By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
  I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

  Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.