Portege R700 - problems with video playback with resolution more 360 p

Similar Questions

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Portege M700 - problem with Dynadock

  I can not change the resolution on a screen connected Dynadock and cannot save the display settings of all - how to fix this?

  I have a Portege M700 running Vista Professional SP1 - mainly the machine is used as a desktop replacement, connected to a screen Viewsonic 19 "wide through the Dynadock DVI - when it is connected so I have the laptop screen is off and use only the Viewsonic at a resolution of 1440 x 900. I had been bothered by the fact that whenever the resumption of the screensaver, the resolution would drop down to some lower State (I was not able to identify the dimensions he thought he was using but probably 1280 x 800, the default resolution of the internal display).

  I tried to solve this problem with the technical support level 3 without success. I thought I was smart and try to install the Intel Graphics Media Accelerator Driver update that is located on the Intel Web site (if you're just trying to install this software, Vista won't let you, but if you unzip it and manually update the drivers it works). This resulted in the connected screen Dynadock is off completely - no signal! So I uninstalled the drivers, reinstalled the drivers Intel original, but now, I have no the ability to adjust the resolution on the Dynadock login screen - and it is defaulting to something that's not going to (too broad and not high enough)!

  I lived several cycles to uninstall and reinstall the drivers for the graphics card (Mobile Intel 965 chipset) and the Dynadock; I updated the drivers Dynadock with the latest download from the website of DisplayLink, tried all sorts of drivers for the monitors associated with DisplayLink, tried several restorations system (which have all failed, which was also quite disturbing but less than an immediate concern), etc. Through all this, there is absolutely no way to choose the correct resolution of the screen through the display properties (my choices are 800 x 600, 1024 x 768 and 1280 x 800), and even simply activate an additional screen translates to nothing happens - the new settings do not stay after hitting "Accept" or "OK". I thought that I had licked when I realized that I had to uncheck "Extend to this monitor box office" to screen internal laptop - indeed I was then able to choose 1440 x 900 for the Viewsonic and everything was good, but everything came back after reboot. Of course, now when I try to repeat, I am unable to uncheck this box not more for the internal screen (well, actually, I can uncheck, but when I hit "apply" or "OK" it simply gets selected again).

  All this comes after I spent weeks trying to get this machine to work with the port replicator, which also did not work - a problem that appears to be from an incompatibility with Vista display card drivers and the port replicator (would have been nice if it sales had told me that when I bought the thing, but I digress...)

  In any case, it seems, as it is a Vista problem, I've seen this question asked of other portable devices vista and displaylink other advice, but I know it's possible to have a working reasonably OK solution since I've had one before I went and it messed up trying to work perfectly. Serves me right for spend 3 k $ on a machine and expected that it works as described, I guess. If anyone has any ideas... my next step is probably a downgrade to XP Pro, and then if that does not work, I'm tempted to break into pieces. Or, if someone's figured out how to get the port replicator to work with a M700 Vista, which is actually a better option for me...

  -Tony

  Hello Tony

  It's a very long story, but I use Portege M700 with Dynadock DVI (PA3542Y1PRP) and have no problem at all. After reading your ad I tried changing all the display options and I didn t notice something strange. It works well.

  Read your ad I see you tried to install different things and I wonder not to have so many problems. The best solution for you is to install the new OS using recovery image. Do the clean install of OS and install later Dynadock Utility 2.3 c. be careful while installation is running and do not interrupt the procedure of facilities. Make sure that all software components are installed correctly.

  When you start installation Dynadock Utility Dynacock can not be connected. When you see the window where you will be asked to connect Audio device USB connect the Dynadock to the USB port of your favorite. I use the USB port on the back.

  I use the external display to monitor LCD 22 with a resolution of 1680 x 1050. In the settings screen is display number three and when I click on it I can set the resolution to the maximum level (native resolution). The image is perfect.

  I tried the same as you:
  -Set the external display as primary monitor (for computer laptop LCD was OFF)
  -J' have enabled screen saver and tested several times, but the resolution is always the same no changes at all the
  -With these settings, I rebooted the phone several times as well as the resolution was still the same no problem at all

  After reboot, I can see the image on the notebook LCD only, to the point where I have to write the password that I can see the same image on laptop LCD and external monitor. A few seconds later, the image is switched on external monitor only and it is the same thing you want to have. The resolution is the same again (native resolution). No change at all and all seems OK.

  At the end I've switched back to the LCD display only. It is also interesting to procedure. As a first step, you click on display number one and activate extended desktop. After that, you will be able to use the option to change the primary monitor. A little strange to me, but OK.

  So everything works well for me and for you I only see an option. Reinstall Vista, install new utility Dynadock (new installations) and test again.
  One last thing: do not connect Dynadock on different USB ports. Use always the same.

  Bye and good luck!

• Portege R700 - Malware with software pre-installed?

  I recently bought a Portege R700 - very well designed and built with an excellent specification. All is let down by the obnoxious behavior of collusion with Microsoft to send malicious software in the software loaded from Toshiba. It is absolutely inexcusable and unacceptable to load software that removes several times my IE8 homepage settings to replace it with MSN and the bling search engine. I hope I've stalked finally how to remove this MALWARE by editing the registry and delete the entries of thugs.

  (Especially from Toshiba) anyone know how I can ensure it is permanently deleted?

  Can someone give me a good reason why I should not report this behavior for the Commissioners of the European Union for violation of the antitrust settlement with Microsoft?

  I am completely disgusted.

  Hello

  To be honest, I never heard malware with software/OS preinstalled Toshiba or Microsoft.
  I m sure all software that will run are tested for the virus, malware, etc. so I put t think you have malicious software installed on your computer.

  I also use the version preinstalled Windows from Toshiba on my two laptops and all the settings, I've defined in IE8 or other programs have never changed.

  I recommend to install an antivirus program before going online.

• Portege R500 - problem with roaming

  Hello

  I use the laptop Toshiba Portege R500. Computer works well, however I had a problem with the connection to the internet from abroad. I use Novaltel Moblink application and modem integrated - on the territory of the Poland, internet connection is working without problem, but abroad there is no link (tested in Czech Republic and Austria). Operating system - Windows Vista Business SP1. When the external modem (PCCard) and GlobeTrotter application is used, then internet woks without reservation.

  Any help will be appreciated.

  Jacek

  If I understand the problem, you are the Poland and this card doesn t work in other countries.

  What is your mobile card is activated for use abroad?

  For me it doesn t look like a laptop but problem the problem of the map.

  You contact the mobile service provider and ask for clarification!

• Portege M400 problem with virtualization

  I have problem with VT in BIOS VT is enabled, but Windows 7 do not. I instaled XPmode, but when I try to start I get connect this virtualization is disable. I don't know what I do mus.

  Hello

  What CPU you have in your Portege M400?

  Virtualization is a function of the motherboard (BIOS) * and * processor type. The fact is that not all processors are dematerialising and then you should check the specification on the first Intel page.

  Check this box!

• Win Media player flicker problem of video playback in Win 8

  When I use XVID as my encoder with programs like CAMSTUDIO screenshots, on a machine with Win XP or Win 7 x 64, the video return correctly from Win media player or VLC.
   

  However, when I perform the same operations on my laptop Win 8, I am twinkle video during playback with Win Media player but VLC rereads flicker.

  I think that something is altered in WIn 8.  There is no problem with reading in a virtual machine VMware 8 Win.

  I tried to go to Windows features to reset Win media Player, no change in the results.

  attached are links to the videos:

  https://www.dropbox.com/s/96vuioetpi7gm7w/recorded%20on%20Win%208.avi?DL=0

  https://www.dropbox.com/s/qdx4w4e5xq4f7yn/recorded%20on%20Win%20XP.avi?DL=0

  Thank you

  Hi Ron,

  I apologize for the late response.

  What is the brand and model of the computer?

  I suggest that you download from the website of the manufacturer of the computer display driver and install it in the computer.

  If the display driver for Windows 8 is not released by the manufacturer, and then install the latest version of the driver in compatibility mode and check.

  Make the programs more compatible with this version of Windows

  Let us know the status of the issue.

• Problem with resolution 1280/720 IN2030M!

  I have a new Dell XPS with an IN2030M monitor and graphics AMD Radeon HD 7570.  Depending on the configuration of Dell, the resolution is set to 1600 x 900, which seems good and the monitor adapts.  But when I reset the resolution up to 1280 x 720, the vertical width is piled up a LOT!  Which is interesting since the horizontal mode to 1280 pixels looks very good.  I played with the controls of the monitor, which made no difference and I've tried magnifying glass mode which worked but the evil eye of photo!

  How can I get the monitor to work at a resolution of 1280 x 720?

  Thank you, Bill

  > In accordance with the manual of IN2030M, 1280 x 720 is not a valid Dell resolution. Next, we validated is 1280 x 1024

  To make a long story short, the PC the problem is my wife, who is having problems, see smaller text on a screen to 1600 x 900.  We have also a 2009 Dell XPS with a ST-220 nVidia graphics card, which perfectly illustrates the 1280 x 720.  I swapped between the 2 systems monitors and found that his monitor on my PC now works fine, but my screen on his PC can't handle 1280 x 720.  The problem was evidently the AMD video card.

  So I spent a LOT of time with technical support working on the problem, and under the direction of the support agent ended up remove the cable from the DVI slot, remove the VGA - DVI adapter, connect the cable to the VGA slot at the back of the computer (this slot was originally under a plastic cap), allowing the slot VGA via BIOS and then by using the Device Manager to disable the AMD card and the control panel to uninstall the catalyst software.  We now have a beautiful picture in all modes, and my wife is a happy camper!  :)

  -Bill

• XP x 64 ~ problem with resolution ~ I can't do this alone!

  OK, well, I installed windows xp x 64 and I started my favorite game (eve online).  When he started, he began in full screen and brought my resolution of 1600 x 1027(I think) at 1027 x 768.  And now I can't return the resolution to its original settings without uninstalling current drivers, then by reinstalling them.  The worst has not yet said.  If I leave my computer for a while, then restart, I'm left with the same question.  A few other games did the same thing, so I'm stuck between the hammer and the anvil.  The reason why I upgraded from xp x 86 x 64 XP is if I could take advantage of all my ram (8gigs).  I will list my computer specs below.

  Motherboard:
  MSI 790GX-G65 AM3 AMD 790GX HDMI ATX AMD Motherboard
  RAM:
  CORSAIR XMS3 8 GB (4 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10666) desktop memory model CMX8GX3M4A1333C9
  hard drive:
  Western Digital Caviar Black WD1001FALS 1 TB 7200 RPM / MIN SATA 3.0 Gb/s 3.5 "internal hard drive
  Optical:Sony Optiarc 24 X CD/DVD rewritable Black SATA model pulled AD-7240 s-0 b
  CPU:
  AMD Phenom II X 4 955 Black Edition Deneb 3.2 GHz Socket AM3 125W Quad-Core processor model HDZ955FBGIBOX
  Video card:
  GIGABYTE GV-N26OC-896I GeForce GTX 260 896 MB GDDR3 of 448-bit PCI Express 2.0 x 16 HDCP Ready SLI Support video card

  on a side note, I installed this driver:
  196.21_desktop_winxp_64bit_english_whql.exe

  I got Strait from the nvidia Web site.
  I'll check here for awhile, please help me anyone.

  THX,
  DOM

  Hello
  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=97&p_created=1098223118&p_sid=XrjJ4bVj&p_accessibility=0&p_redirect=&p_srch=1&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NSw1JnBfcHJvZHM9MiZwX2NhdHM9NjAmcF9wdj0xLjImcF9jdj0xLjYwJnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yZXNvbHV0aW9uIGNoYW5nZQ!!&p_li=&p_topview=1

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=2487&p_created=1257888617&p_sid=XrjJ4bVj&p_accessibility=0&p_redirect=&p_srch=1&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NSw1JnBfcHJvZHM9MiZwX2NhdHM9NjAmcF9wdj0xLjImcF9jdj0xLjYwJnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yZXNvbHV0aW9uIGNoYW5nZQ!!&p_li=&p_topview=1

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=2182&p_created=1208272583&p_sid=XrjJ4bVj&p_accessibility=0&p_redirect=&p_srch=1&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NSw1JnBfcHJvZHM9MiZwX2NhdHM9NjAmcF9wdj0xLjImcF9jdj0xLjYwJnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1yZXNvbHV0aW9uIGNoYW5nZQ!!&p_li=&p_topview=1 If this post helps to resolve your issue, Please click the Check Mark As Answered Check Mark On This Page as it helps others who need quick access to Answers THANK YOU AND GOOD LUCK

• Problem with resolution

  Hello, I work with Adobe After Effects and Adobe Photoshop, both versions of CS6 of Adobe Master Collection CS6, I wanted to create a video Full HD (1920 x 1080 p) on AE, but first of all, I created a composition on 1920x1080p, but oddly, PS in PS looks much more "panoramic" to say something and then I import into AE and it looks like a little re-escaled up and down the sides It is more strange since the two compositions are in Full HD 1920 x 1080 p but they don't look the same, but also, so I save the image in JPEG or PNG directly from the PS, the image looks the same as it appears in AE, so maybe the problem is photoshop? the image also appears a bit to scale up and down the coast in the video, and maybe don't look that bad, but still it is a problem and, obviously, I cannot just leave like that.

  Thanks to read me, I hope someone can answer me soon, because I make videos in my work and I had this problem. Thanks in advance!

  It will have an effect how she got out.

  If you want things to be not be stretched, work in pixels square in Photoshop and After Effects.

• Portege R100 problems with post CD RW

  I use Portage R100 with external CDRW/DVD player (model? is PA3352E - 2 CD 2). Extension is grateful as a CD-ROM. AHEAD NERO and other programs cannot see devices that are able to write discs. I tried to do what helps recomminded programm but I havn't receive any result. I use MS XP OS w SP2 and the reason for my problem according to MS HELP can be in SP2. Guies MS suggest waiting for the next Servies Pack that advertise in 6 months.
  I have no chance to solve my problem? And how?

  Thank you all.

  Hello

  Well, I put t know if it helps but you can try to update your old BIOS.
  I found on the Toshiba site, the newest BIOS update 09/30/05.
  Furthermore, please check the information for Microsoft Windows XP SP2 update for this device.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Portege R100: Problems with CD/DVD Lacie USB 2.0 drive

  Hello everyone, this is my first post here.
  I'll most likely be a regular here I come to buy a R100.

  I am having trouble with an external hard drive that I bought especially for the R100,
  It's a Lacie CD / DVD burner, model number: 300819EK.

  This unit can be powered by AC or by using the two usb ports.
  I use two usb ports.

  The R100 recognizes the Lacie, and in the Device Manager list, the drive is then
  in the list, but he is listed as a drive of Toshiba.
  I'm assuming that this disc of Toshiba external hard drive, you could buy for use
  with the R100.

  The Lacie drive works, but it seems preloaded the R100 CD / DVD
  pilots are contradictory in some way and is made using the player very touched and don't miss.
  He often gets 20% about a facility, then crashes.

  Is there a spare driver I can download that I can replace the toshiba
  drivers with?

  As if by having the Lacie 100% functional means there is obviously a
  How to overcome the problems.

  Hope you girls and guys can shed some light on this for me.
  Thank you.

  Hello, Larry

  You will be very happy if someone will be able to give you some explanations in this regard. I can tell you more: the fact is that this model is created and tested to work with Toshiba compatible external devices. Because of this, Toshiba built in all the necessary drivers in the operating system preinstalled. It should help the installation and also drive fast and quick recognition.

  This does not mean that you MUST use discs from Toshiba. Of course you can use what you want, but the only problem can be when you try to install the OS. Toshiba recovery image contains drivers for Toshiba drives and recovery procedure will work without any problem because the external sides will be immediately recognized.

  I recommend to visit the Lacie support page and check if you can find some driver it. Toshiba has nothing to do with it, if you use a third party product.

  Often, he gets 20% approximately of a plant then crashes sorry but I t did not understand what you mean with it and what you mean with 20%. Second part of your ad is very confusing and I really don t know what you mean.

  Good bye

• Problem with "resolution and size of the work exceeds the maximum that can be rasterized.

  Hi all

  OK, I've created a document 162,7 "x 90.6" (work plan) for a design I design. The document was created using all the flaws - I think that's where I was wrong. Illustrator is now telling me that "the combination of the size of the work and the resolution exceeds the maximum that can be rasterized" after I opened the document and when I try to add a shadow to what whatever.

  Other than vector graphics, I created in illustrator, I only have 3 180ppi and 4 300 PPI pictures tranfered just behind the camera photograpers.

  I chose:

  1 "print document" in the initial startup window.

  2. I got the size of the artboard, purge and left control the 'pixelation effects' "high (300ppi).

  I think that to let the adjustment effects of pixelization at 300ppi, where is the problem.

  What I need to create a new document or I can fix it already exists?

  Illustrator is 32-bit only and is limited to 3 GB or RAM usage, it is more a limitation to a bug.

  t has a limit to the size of a tiff file that I can export for example and you can have reached this limit.

  Try opening it in Photoshop before you start all over, and then save it in psd or tiff.

• Cooling on Portege R700 problem

  Hello

  I got to know that the cooling on the R700 latop problem is due to poor design.

  To be more precise, aluminum has been used to build the heatsink instead of copper as it is shown in the commercial video of Toshiba (see below if you please). I sent my laptop to repair and it arrived just in Sommerdae (Germany).

  Nevertheless, I would like to ask for a replacement of another laptop outside of this range if the heat problem could not be fixed permanently.

  Best regards
  Tahar B.

  video link: http://www.youtube.com/watch?v=GD1o9qM2N3o

  Hello Tahar

  Thanks for your comment and a link. If you are not happy with your speech for laptop Toshiba people and I hope you can clarify.

  To be honest s Toshiba best laptops are Portege series and they are designed for the use of the company and in the past, that Toshiba has used the best of the technology, the know-how and the best materials for Portege laptops.

  I have old Portege 2010 and it was smaller, lighter laptop each generation. So far it works perfectly and the design is just... perfect.

• Other new lines in SQL script file and problem with SQL * more

  Hi all
  
  
  I would like to ask a question on the characters of new line inside files SQL scripts. I have a very long SQL query, stored in a file txt (ANSI encoding). Because query instructions are very long (several table joins and WHERE conditions) tried to separate, WHERE and ORDER BY clauses by inserting several new characters of lines (just hit the entrance) among them in order to improve the clarity of the source code. Now the problem is, whenever these newline characters are inserted in the file, apparently SQL * Plus cannot parse the file properly and gives me the following error message:
  

  SP2-0042: unknown command "FROM" - rest of line ignored.
  SP2-0734: unknown command beginning "myenterpri..." - rest of line ignored.

  The problem is definitely related to these new line because characters that when I remove them, the scripts runs without any problem. I would appreciate that you could kindly guide me how should I deal with this problem. Is there any SQL * Plus command to run to correctly interpret the new line characters?
  
  
  Thanks in advance,
  
  
  Kind regards
  Dariyoosh

  Hello

  In [SQL * Plus 9 | http://download.oracle.com/docs/cd/B10501_01/server.920/a90842/ch13.htm#1013073] (and), you can tell

  SET     SQLBLANKLINES   ON
  

  allow to completely empty rows in an SQL statement.