Portege R700 (PT311E) - unknown device in XP Device Manager

Similar Questions

• Portege R700 PT311E-I'm looking for the Bios v1.50

  Hi everyone :-)

  BIOS v. 1.50 seeks model r700 toshiba pt311e sold for example in Poland.
  On Toshiba download page is only new version 1.60 but I need previous version 1.50.

  Can someone help me and send me by email? [email protected]

  Thank you very much.

  Hello

  Unfortunately, Toshiba driver European page simply provide new versions BISO.
  But I also found versions older BIOS on the page of the Toshiba driver we.
  [Portégé R700-S1320 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2682554& rpn = PT311U & modelFilter = R700-S1320 & SelCategorie = 2756709 & selFamily = 1073768662]

  But it s for Portege R700-S1320 and series PT310U / PT311U / PT314U
  So maybe it of the same BIOS which is designed for Portege R700 PT311E (E means European U us.)

• Portege R500 - 4 unknown devices after downgrade from Vista to XP

  Hi all

  I've downgraded a R500 from Vista to XP Pro SP2 and installed all drivers from the support page in the correct order, even in the device manager are always 4 unknown devices called 'data Interface '. Their hardware ID is:

  USB\VID_0930 & PID_1302 & MI_00\6 & 2EDD84F6 & 0 & 0000
  USB\VID_0930 & PID_1302 & MI_01\6 & 2EDD84F6 & 0 & 0001
  USB\VID_0930 & PID_1302 & MI_02\6 & 2EDD84F6 & 0 & 0002
  USB\VID_0930 & PID_1302 & MI_03\6 & 2EDD84F6 & 0 & 0003

  All 3 USB ports operate normally and at full speed, the Interface of data got to be something else.

  Thanks in advance for any advice or help

  Hello

  These are the modem and the features of com of your compilation in the 3G module.
  Unfortunately the drivers are not available on the European download page now.
  I guess it will take a few days until that pilots will be released.
  Please see http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for this.

• Portege R700 - peripheral unknown in hardware

  Hello

  Win 7 Pro, after installation clean (I installed all the drivers Toshiba again), I have 2 unrecognized currencies left.

  1 a:
  AuthenTec Inc. AES1660
  Location: Port_ #0002.Hub_ #0003

  It works fine, but no driver is shown and it is not recognized by windows.
  Yes, I installed drivers for the fingerprint and Touchpad.

  2 a: unknown device
  Other devices
  on system compatible ACPI Microsoft
  The drivers for this device are not installed. (Code 28)

  Details: ACPI\TOS6205
  * TOS6205

  Any ideas? Thank you!

  The first should be fingerprint sensor and a second module BT. If you have installed BT stack installation activate BT (FN + F8) to complete the installation of the BT module.

  To be honest I n don't know what is wrong you but here's the Win7 installation order. All the things listed must be installed in this order:

  Win 7
  USB3.0 Driver 1.0.20.1
  Driver USB-Serial 1,00,000
  TOSHIBA Assist 4.00.00
  Security TOSHIBA Assist 2.0.8
  TOSHIBA Bulletin Board 1.6.08.0
  TOSHIBA ReelTime 1.6.06.0
  Infineon TPM software professional v3.60.2071.00
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.00.40.1215
  Intel AMT 6.00.40.1215 software
  Driver Intel 8.15.10.2125
  Driver Intel Rapid Storage Technology 9.6.1.1001
  Realtek Audio Driver 6.0.1.6083
  Driver Intel LAN 14.8.3.6
  Synaptics Touch Pad Driver 15.0.12
  TOSHIBA value added package 1.3.12_64
  Ricoh 2.08.03.04 card reader
  Wireless LAN driver
  ConfigFree 8.0.30
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
  TOSHIBA Fingerprint Utility 1.0.2.27
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Bluetooth Stack for Windows by Toshiba
  TOSHIBA eco Utility 1.2.12.64
  TOSHIBA HDD_SSD 3.1.64.6 attention
  TOSHIBA HDD Protection 2.2.0.4
  TOSHIBA Service Station 2.1.40
  TOSHIBA PC Health Monitor 1.6.2.64
  TOSHIBA Sleep 1.4.1.3 utility
  TOSHIBA Disc Creator 2.1.0.2 for x 64
  TOSHIBA Media Controller 1.0.80.7
  TOSHIBA Media Controller plugin 1.0.5.10
  UPDATE2 PCIIDEREG - 1.1
  Update3 FixFPService_REG_1.0
  Update4 TosVolRegulator_x64_1.1

• P 8470 & HP HP 8440 P: upgrading to W10 Pro 64 bit / device Reporting - unknown device manager

  I have recently upgraded to Windows Pro 64-bit 10.  Machines involved are - 8440p & 8470p running W7 Pro 64-bit.

  The Device Manager shows an unknown device - ACPI\HPQ6000\3 & 33FD14CA & 0.

  Could someone tell me what this is in reference to.  Perhaps point to a driver that I could update.

  Thank you / / Jeff

  You are the very welcome.

  The reason why you don't see the driver is because most of the drivers are missing in support pages, which have not worked directly for HP split into 2 companies from 1 August.

  This is certainly the driver you need.  If the version of W7 works, I can't say.

  See if it works.

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

  If this driver does the same thing...

  Go to Device Manager and click on the unknown device of 6000 who need pilots.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option, then at the bottom of this window, let pick me from a list of drivers for devices on my computer.

  Click on disk and go to C:\SWSetup\sp59282\accelerometer and select the HP Mobile Data Protection sensor and see if the pilot goes like this.

  Here's a partial copy and paste of the accelerometer installation information file.

  As you can see the device is supported by the driver.

  But it's the most recent driver is there, I know.

  [Manufacturer]
  Mfg % = HP, ntamd64

  [HP.ntamd64]
  DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6000

• Portege M200 - device unknown in Device Manager

  I did a clean install of Windows XP on my toshiba portege m200 (Tablet). I have most of the devices drivers installed, but there is one that I can't understand. The device manager says I have an "unknown device" on my "Intel 82801 dbm lpc interface controller.

  What is it? I thought it was the chip set, but I had installed the Intel chipset drivers (twice, just to make sure that I really did), but it still reads as 'unknown device' on ' Intel (r) 82801DBM LPC Interface Controller - 24CC.

  To resolve this issue go to the device, right click on the unknown device, Manager and then select set to update driver.
  When the Hardware Update Wizard appears, select the advanced option.
  From the next window, select the 'don't search. I will choose the driver' option
  Now, go to the Intel announcement and select good "82801DBM LPC Interface Controller - 24CC.
  Click OK and now it should work.

  Also, be sure you have all the drivers installed from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Portege M700 - 4 devices called Data Interface in the Device Manager

  I am facing a problem with the toshiba portege m700.
  In Device Manager, I have 4 devices called Data Interface.

  I completely wiped the hard drive and formatted in ntfs.
  Then installed Windows Vista 32-bit and installed all the drivers available on the toshiba site, but I find myself with four instances of data Interface in other devices in Device Manager.

  Can anyone help?

  Hardware ID data interface:

  USB\VID_0930 & PID_1302 & REV_0000 & MI_00

  USB\VID_0930 & PID_1302 & MI_00

  Have you installed the O2Micro smart card reader? O2Micro Smart Card Reader which allows you to authenticate on your computer with a smart card and a PIN code.

  In addition, you should check if the Wireless Mobile Broadband of Novatel has been installed too!

• Re: Satellite 5200 701: unknown device in Device Manager.

  Hello.

  It WinXP Pro + SP 3.
  In the display devices, such as an unknown device manager. Try all of the pilots, who were on a disc with the laptop, nothing helps. Give the solution!

  I still use Windows XP Home with Service Pack 2 and I'm really happy with it. If you have some problems with SP3 remove and continue to use Windows XP Home with Service Pack 2 only. Satellite 5200 is quite old but very nice laptop. Make sure that the laptop works fine with SP2 and you have an application of good-antivir.

  Simply to operate Satellite 5200. I noticed that many people have reported on various issues after installing SP3. Exactly the same thing with Vista SP1.

• Portege R700 - need drivers for Windows 7 32 bit

  Hello

  I got the new R700 I develop a version of Windows 7 Enterprise for and I can't find the driver files or install correct programs for the 32-bit version of the TOSHIBA fingerprint utility. I found the download for the R700 on the US site, and while this installs, it doesn't have the 32-bit driver for fingerprint reader in the R700. Can someone direct me to the correct download, or display the x 86 download the site of NZ?

  BTW - the x 64 download works fine if I install Windows 7 Ent x 64 and install it.

  Model number = PT311A-00J00Q
  Component = AES1660 authentic Tec Inc.
  PCI device ID = USB\VID_08FF & PID_168B

  Thank you

  Hey,.

  Usually, your exact model number is listed in the Australian page it seems you have an Australian model:
  http://www.MyToshiba.com.au

  The problem is that I can t find any 32-bit drivers it :(

  So I checked the European page where I found a similar model, PT311E. There you can download Fingerprint Utility for Windows 7 32 bit, it s is available!
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios
  Laptop > Portege > Portege R Series > Portege R700 > PT311E > Windows 7 32 bit

  Check this box!

• Re: Downgrade Windows XP for Portege R700-1E0

  Hello

  In my company, we will buy 3 computers portatil model Portege R700-1E0
  The staff of our computers is installed in Windows Xp.
  My question: is it possible to make the downgrade to Windows XP?

  Post edited by: GROSADO

  Hello

  I checked the support Toshiba in http://eu.computers.toshiba-europe.com page and I found the drivers of Windows XP Home edition, tools and utilities for Windows XP Home for your Portege R700 (PT311E) so you should be able to install Windows XP on this laptop Portege home edition.

  If you need more assistance you are welcome.

• Portege R700-1hd: installation of Windows 7

  Trying to reinstall Windows 7 on my R700-1hd but I'm coming through the formidable, select the driver to install page.

  Ive installed s OS on many systems before so know looking for a Sata driver or a chipset.
  However, I can't seem to find, maybe im missing something?

  If anyone could enlighten us about situation or me in the right direction for some drivers would appreciate it a lot

  Thank you

  Chris

  Hello

  All the drivers for Win 7 for Portege R700 PT311E are available on the European driver Toshiba page.

  

• Portege R700 - unit to replace DVD with SSD

  Hello world!

  This is my first post in this forum.
  I searched for an answer to my problem and I have not found it so I opened this post.

  I bought a Portege R700-PT311E there are a few butterflies and now I want to install an SSD in the DVD slot. -Does anyone know if it is - it possible?

  I want to install the OS on the SSD drive and let the 500 GB HARD drive to store information.

  Thank you very much in advance,
  Edu

  TrackSmart thanks for sharing this with us!

• Satellite L650-1NC - Map disappeared WLAN Device Manager

  Hi guys!

  I bought the Satellite L650-1NC. After installing the system, everything is ok, but no wireless card. I downloaded the latest drivers from Toshiba and manufacturer sites. After you have installed the latest drivers for the wireless card disappeared from the Device Manager! Connection via cable, works without problem. Exhausted all ideas. Help, please.
  Operating system: Windows 7 64-bit
  Wireless card: Realtek Wireless LAN adapter 8191SE/8192SE

  PS. Sorry for my English

  Hey,.

  The WLAN card is listed in the device as unknown device manager or it is completely gone?

  It's probably happened due bad installation driver in your case, I recommend removing all WLAN drivers and run CCleaner tool to clean the registry. Then download & install the latest official Portal WLAN WLAN drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Also, make sure that the wireless network adapter is enabled. This can be done with the FN + F8 key combination.

• Portege R700 - Win7 - cannot find the driver for USB Multimedia Audio Device

  Are there any Windows 7 drivers for the "USB Multimedia Audio Device" found on a R700 with the Toshiba Hi Speed Port Replicator II (PA3916U-1PRP)?

  In "Devices and printers", there is a device in the section called a + USB Multimedia Audio Device + Unspecified +. Windows 7 can not find the drivers for it. Audio seems to be working through the port replicator.

  The only related issue I've seen is that sometimes, when I press the "eject" button, Windows complains that a device is in use and the ejection is defective. This is very similar to that reported as ' [Undock R700 question P3838 |]» http://forums.Toshiba.com/T5/General-troubleshooting/R700-undock-from-P3838-issue/TD-p/149453].

  In my case Windows tell me an application to use it or the device in use. I strongly suspect the audio device.

  I have not found a solution so eject manually despite the failure or sleep it and then eject manually. I didn't notice the two approaches being necessarily better.

  HI PeterH,

  Just a simple question: do you use the preinstalled version of Windows 7 at Toshiba and you have most unknown devices in Device Manager or just this USB Multimedia Audio device?