Portege R700 - registration of fingerprints on Windows 7

Similar Questions

• Portege R700 - impossible to pass to Windows 10

  I have a Portege r700 with original Windows 7 OEM installation.

  Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

  The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

  After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

  I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

  I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

  Any idea?

  I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
  concerning
  / Anders

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• Portege R700 - fonts in the main window of AuthenTec Truesuite changed

  Hello

  I installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After two days of good performance the police in the main window changed, becoming impossible to read. No doubt, I have change some settings in Windows and, also, this font has changed because of course I change anything in your application. Bearing in mind that my OS is Windows XP Professional SP3, pelse be so kind and help me with a solution to return to standard fonts.
  I uninstalled applications records, cleaned, reinstalled software package downloaded from the Toshiba site, request

  Thank you

  Best regards

  Cristian

  Can send you a link where you can see the screenshot?
  I mean for a better understanding.

• Portege R700 - fonts in the main window changed

  Hello

  I installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After two days of good performance the police in the main window changed, becoming impossible to read. No doubt, I have change some settings in Windows and, also, this font has changed because of course I change anything in your application. Bearing in mind that my OS is Windows XP Professional SP3, pelse be so kind and help me with a solution to return to standard fonts.

  Thank you

  Best regards

  Cristian

  Hello

  I assume you mean on the fonts in Internet Explorer window.
  Right?

  Please check the display option in the menu bar. Zoom must be set to 100% and Textsize must be set to medium.
  In addition, you can check the settings in the control panel-> display-> appearance tab
  There is option called the size of the font. In my case it s set to normal.

  Give it a try.

• Portege R700 - recognition of fingerprints does not recognize my fingers

  My recognition of fingerprints has worked for a day about. Now, it does not recognize my fingers (3 registered). When I go in utility prints/utilities-Toshiba digital displays with a fingerprint window Panel, indicating that he needs my fingerprints until I have access to the control panel. It will not accept my footprint so I select to close the window and leaves the control panel.

  When I visit different websites they say it is ready (on a yellow sign) and I keep having to say cancel because I fear it will record and then leaves me not in the Web site.

  It was such a bad experience I just go into the control panel and disable. How do I do that?

  Have you tried to delete saved fingerprints fingerprints?

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917

• Portege R700, Windows 7, mounted sudden fan/cpu, freeze and force stop

  Hello

  I have a persistent problem that starts to become annoying... Portege 700 running Windows 7. Normal use (office, WMP, IE anything heavy)

  No apparent reason (no new requests started for example), there is a sudden increase in the speed of the fan which should be max (looks it takes off) and I suspect use of the processor at the same time. And it's that it's not simply to stop (I left for awhile on occasion) and does not match an input (keyboard or mouse). The only 'solution' is to use the power button to force a shutdown. (And then I lose all cookies etc. when starting again).

  I did a lot of Googling on that. Thought it was WMP network sharing Service and has taken measures to see, but have recently disabled that service and still the problem occurs... (I checked that it is always disabled when just rebooted).

  I keep as 'clean' as I can (have AV installed, use ccleaner regularly etc etc) so would be surprised if a virus/worm, but am running a scan again just in case...

  This happens quite often be a pain - and I have no idea what is the cause, if any ideas gratefully received.

  Thanks in advance.

  Tim

  Hello

  I m no owner on the site Web of Toshiba Portege R700 but I found an article that describes EXACTLTY the same problem. High activity of its use and CPU fan, then it freezes :(
  Here is the link to this article:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software could help get rid you of this problem. :)

• Portege R700 - need drivers for Windows 7 32 bit

  Hello

  I got the new R700 I develop a version of Windows 7 Enterprise for and I can't find the driver files or install correct programs for the 32-bit version of the TOSHIBA fingerprint utility. I found the download for the R700 on the US site, and while this installs, it doesn't have the 32-bit driver for fingerprint reader in the R700. Can someone direct me to the correct download, or display the x 86 download the site of NZ?

  BTW - the x 64 download works fine if I install Windows 7 Ent x 64 and install it.

  Model number = PT311A-00J00Q
  Component = AES1660 authentic Tec Inc.
  PCI device ID = USB\VID_08FF & PID_168B

  Thank you

  Hey,.

  Usually, your exact model number is listed in the Australian page it seems you have an Australian model:
  http://www.MyToshiba.com.au

  The problem is that I can t find any 32-bit drivers it :(

  So I checked the European page where I found a similar model, PT311E. There you can download Fingerprint Utility for Windows 7 32 bit, it s is available!
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios
  Laptop > Portege > Portege R Series > Portege R700 > PT311E > Windows 7 32 bit

  Check this box!

• Re: Downgrade Windows XP for Portege R700-1E0

  Hello

  In my company, we will buy 3 computers portatil model Portege R700-1E0
  The staff of our computers is installed in Windows Xp.
  My question: is it possible to make the downgrade to Windows XP?

  Post edited by: GROSADO

  Hello

  I checked the support Toshiba in http://eu.computers.toshiba-europe.com page and I found the drivers of Windows XP Home edition, tools and utilities for Windows XP Home for your Portege R700 (PT311E) so you should be able to install Windows XP on this laptop Portege home edition.

  If you need more assistance you are welcome.

• Portege R700 - upgrade Windows 7 32-bit to 64-bit and memory question

  I recently bought Portge R700 and am disappointed by the memory. I have a license of Windows 7 64-bit edition: what problems can arise if I update? Once installed, I can then use 8 MB of RAM.

  Moreover, I found the reagrding misleading Web site the option of using the 8 MB of RAM with the32-bit OS. I have 4Mb installed, years to see that only 2.86 MB is usable.

  I get "out of memory" messages and would like to know how to allocate more memory to live for video.

  Tom's right. If you want to use the 64-bit operating system, you must do clean install operating system. All drivers and tools specific to Toshiba and utilities must be installed Additionally one by one.
  If you need assistance with installing Win7 let us know.

  I put t know for what purposes do you use your laptop and what applications are important for your daily work, but, in general, I don t think you will have problems using 64 bit OS. Please keep in mind that all additional software is 64-bit capable and everything will be OK.

  As far as I know laptop user doesn't have the influence of the use of video memory and it runs automatically. It is unclear to me that you can change these settings and set how much RAM can be used for video operations.

  Anyway, Portege R700 is nice for laptop with sufficient power for daily use and also for use with standard applications. I don t think you ve bought this laptop for games.

• Portege R700 - install Windows 7 via Windows Deployment Services - error

  Hello

  I have a set of 8 Portege R700 PT310-E computer laptop on which I need to install Windows 7 Professional. I want to do this by using our company Windows deployment server (using Microsoft Deployment Toolkit 2010 to generate the image). While it is loading all software, our company uses.

  I have been using the version 32 bit Windows 7 and do a PXE boot from the server. The problem I encountered is that when the laptop starts the installation of the server image. It loads successfully, but does not because it can't find the network device.

  What I find strange that I loaded all R700 network drivers in the boot.wim file. I also tried to download all Windows 7 Pro LAN drivers remaining on the Intel site and load those as well as the pilot on the Toshiba site, but it has also generated the same error.

  Someone at - it experience to install via WDS on the R700 model? Is there a fix for this, because we are very impressed by these laptops, but being only unable to install via WDS is more annoying.

  Any help would be much appreciated.

  Kind regards

  Dominic :-)

  Hello

  What exact version of R700 do you use? Also what version of BIOS is installed?

  BR

  Tom

• Portege R700-1hd: installation of Windows 7

  Trying to reinstall Windows 7 on my R700-1hd but I'm coming through the formidable, select the driver to install page.

  Ive installed s OS on many systems before so know looking for a Sata driver or a chipset.
  However, I can't seem to find, maybe im missing something?

  If anyone could enlighten us about situation or me in the right direction for some drivers would appreciate it a lot

  Thank you

  Chris

  Hello

  All the drivers for Win 7 for Portege R700 PT311E are available on the European driver Toshiba page.

  

• Portege R700 - Windows 7 32-bit - NETWORK adapter driver does not work.

  Hi all

  I rebuilt a Portege R700 with Windows 7 32-bit o/s. I downloaded the drivers from the Toshiba site but could not get the only rider listed working card. It seems to install ok but will not work. If I try to 'put to date pilot' with Device Manager and point to the files expanded, he said that the required software is not found.

  Is there a driver that works and can someone tell me where it is please?

  Concerning

  Dave

  > No idea what driver NETWORK card works and also which driver, I need for the controller PCI of communication Simple?

  This seems to be the controller of Intel AMT.
  You can download the driver form Intel page.
  Search for Intel AMT or check this link to the page of the Toshiba driver:

  [Intel Management Engine Interface | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 5379 & selSh ortMod = 1019 & language = 13 & selOS = 29 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 75561 & OSI D = 29 & driverLanguage = 42]

• Portege R700-17Z - upgrade to Windows 7 64 bit

  Hello

  I currently have a Toshiba Portege R700-17Z.

  I want to increase the amount of RAM from 2 GB to 8 GB, and therefore I want to run 64-bit Windows. I was planning on running a clean reinstall, but 64-bit Windows built into this machine? Or I need a disk full?

  If I need a drive in its own right, any ideas on how to do it without an optical drive?

  Thank you very much!

  The first news on RAM upgrade: you're right. You can upgrade your Portege up to 8 GB and 4 GB compatible modules have part number PA3677U-1M4G.

  According to the specifications of the laptop your Portege shipped with WIN7 32 BIT PROFESSIONAL, but it is supported for Win7 64 bit. 64-bit drivers and tools specific to Toshiba and utility can be downloaded from the Toshiba download page.

  Now what is your decision? If you need assistance with installing the OS let us know.