Portege R700 with Windows 7 64-bit: Windows Explorer fails to update

Similar Questions

• Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

  Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

  Try to download from this site:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Is it possible to access wireless and drop files from pc to SanDisk WFD 64 GB with windows Explorer

  Is there a way to connect wireless PC to SanDisk Flash Drive 64 GB with windows Explorer wireless.

  For example with windows Explorer for \\172.25.62.1\wfd. If I try this I can not drop the files it contains.

  If I connect wireless PC to the Flash wireless of SanDisk drive 64 GB with internet explorer, I can show only files with http://172.25.62.1/wfd so it is not an aption.

  Can someone help me?

  This can help

  http://KB.SanDisk.com/app/answers/detail/A_ID/14126/kW/Cyberduck

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A type of file has lost its association to open with Windows Explorer

  On my machine the XP Acronis True Image Archive of backup .tib file type opens with Windows Explorer and I see in the details of the files in the backup.

  On my machine the association used to be with Windows Explorer Vista, but recently the association has changed. I can't figure out how to restore it.

  When it is correctly associated, I can read files in Windows Explorer, but no more.

  When I right click on the file and select Properties, it gives me the ability to change opens with Adobe Reader, Internet Explorer, iTunes, Media Center, Notepad, paint, PowerDVD, RealPlayer, Windows Calendar, Windows Media Player, Windows Photo Gallery, Word Pad or browse...

  I was hoping to go to Windows Explorer, but I was not able to find it. Is it in a folder hidden somewhere?

  Hello David Reed Peterson,.

  Thanks for the return of the response.   Please see the link below to see if any of the listed steps will fix this for you.

  Windows Explorer has lost its "file Association".

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-Explorer-has-lost-its-file-association/1bd921e8-4747-4968-a7ac-5bfb4b48e32f

  If this started recently, have you tried a system restore to a point in time when it worked correctly?

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Please let us know status

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem with windows Explorer, getting the error Windows Explorer has stopped working.

  I have a problem with windows Explorer (windows 7 OS) - the causes of each click on the right button of the mouse on the desktop icons to convey a message "Windows Explorer has stopped working. Windows Explorer restarts. How to solve this problem?

  Thank you

  Miodrag

  Thank you very, very much... I solved my problem by uninstalling the software "daemon tools".
  I have only Microsoft Security Essentials antivirus, is it necessarily to install another antivirus software?

• Why my windows 7 power up with windows Explorer loaded when it is not starting

  Windows Explorer is responsible what ever time I start my pc, how can I stop this?

  The same reason that you got in your post double-

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-boots-up-with-Windows-Explorer-loaded/ffc77b21-6ca3-4ff1-9D9F-856c06c69108

• CANNOT OPEN. FILES WITH WINDOWS EXPLORER ZIP

  Hi all I was wondering why I can't open the zip files more using windows Explorer. Pourrait last week. When I double click or write, click Open, nothing happens. If I write click Open with windows Explorer, nothing happens. If I write a click and chose the extract, it will extract the screen then I press extract all an error message comes up saying the .zip file is not valid. Running windows 8. have winrar installed so I can open these files in this way. I was wondering how is it doesn't work with windows Explorer. Can still make .zip files to click with the right button on a file and choose compress to zip file but can't open it unless I use winrar.

  Finally found the problem I have an app windows 8 called windows manager 8 one of the many parameters is to disable windows to open zip files, this has been activated...

• Windows Explorer fails repeatable

  Windows Explorer fails to 3 or 4 times an hour with the message "Windows Explorer has stopped working".  I check "search for a solution online and restart the program" and it reboots, the problem event name: APPCRASH
  Application name: Explorer.EXE
  Application version: 6.1.7601.17567
  Application timestamp: 4d672ee4
  Fault Module name: mfc90u.dll

  Any help would be appreciated.

  If all goes well, who was the culprit.  If you look at the tab "Details" of the properties of a file, you will find the version information that I was talking about.

• My Window Vista fails to update KB 2533523 and 2468871 KB

  My Windows vista fails to update CB25335223 and KB 2468871 several times already.  I tried to update menually via the microsoft Web site, but he did not find these two updates?  What should I do?

  Hello

  1. what happens when you try to install updates?

  2 are you able to install some other updates?

  3. do you get an error message?

  Method 1: Put the computer in a clean boot State before updates

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable any security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Download and install the 1 kb/2533523 for the .NET Framework 4 reliability update

  http://support.Microsoft.com/kb/2533523

  Download and install the update kb/2468871 for the .NET Framework 4.

  http://support.Microsoft.com/kb/2468871

• Portege R700 - upgrade Windows 7 32-bit to 64-bit and memory question

  I recently bought Portge R700 and am disappointed by the memory. I have a license of Windows 7 64-bit edition: what problems can arise if I update? Once installed, I can then use 8 MB of RAM.

  Moreover, I found the reagrding misleading Web site the option of using the 8 MB of RAM with the32-bit OS. I have 4Mb installed, years to see that only 2.86 MB is usable.

  I get "out of memory" messages and would like to know how to allocate more memory to live for video.

  Tom's right. If you want to use the 64-bit operating system, you must do clean install operating system. All drivers and tools specific to Toshiba and utilities must be installed Additionally one by one.
  If you need assistance with installing Win7 let us know.

  I put t know for what purposes do you use your laptop and what applications are important for your daily work, but, in general, I don t think you will have problems using 64 bit OS. Please keep in mind that all additional software is 64-bit capable and everything will be OK.

  As far as I know laptop user doesn't have the influence of the use of video memory and it runs automatically. It is unclear to me that you can change these settings and set how much RAM can be used for video operations.

  Anyway, Portege R700 is nice for laptop with sufficient power for daily use and also for use with standard applications. I don t think you ve bought this laptop for games.

• Portege R700 - install Windows 7 via Windows Deployment Services - error

  Hello

  I have a set of 8 Portege R700 PT310-E computer laptop on which I need to install Windows 7 Professional. I want to do this by using our company Windows deployment server (using Microsoft Deployment Toolkit 2010 to generate the image). While it is loading all software, our company uses.

  I have been using the version 32 bit Windows 7 and do a PXE boot from the server. The problem I encountered is that when the laptop starts the installation of the server image. It loads successfully, but does not because it can't find the network device.

  What I find strange that I loaded all R700 network drivers in the boot.wim file. I also tried to download all Windows 7 Pro LAN drivers remaining on the Intel site and load those as well as the pilot on the Toshiba site, but it has also generated the same error.

  Someone at - it experience to install via WDS on the R700 model? Is there a fix for this, because we are very impressed by these laptops, but being only unable to install via WDS is more annoying.

  Any help would be much appreciated.

  Kind regards

  Dominic :-)

  Hello

  What exact version of R700 do you use? Also what version of BIOS is installed?

  BR

  Tom