Portege R830 had dead blue when the screen connects to wifi or shared internet

Similar Questions

• Dead zones of the screen when I write

  I get the dead zones of the screen when I write. They are not always in the same area of the screen, but go across the width.
  Everyone knows this and they found how to solve the problem?

  Hello

  It's not easy to say what can be the problem.
  Well, first of all, I would recommend to recover the OS with the recovery CD. If after this procedure, the problem persists then you should try to update the display driver. If this doesn't help, so I guess that it s something wrong with the hardware. In this case, you should ask for help ASP.

  Good bye

• How can I save by iPad 3 when the screen is black and nothing appears?

  How can I save my iPad in ITunes or iCloud 3 when the screen is black and nothing appears?

  Is the empty screen, because just the screen is broken, or is the iPad just dead? Have you tried a soft-reset/reboot it?

  At least you can see what you touch on the screen of the iPad, you cannot force a backup to iCloud.

  If the iPad still works and is connected to wifi, a backup should automatically happen (if iCloud backups are enabled) if it is connected and the locked screen.

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• Pre Bluetooth crashes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

  I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good.

  It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

  I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

  Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• Copy appear in blue on the screen

  I use Adobe Acrobat Professional 8. All my copy (all text) is displayed in blue on the screen, when it is supposed to be black. When I send to the printer however it prints correctly in black. Is there a reason whey it is happenening and is there a way to fix this? I tried to open different files PDF from multiple sources is not just a pdf file that does this. What happens to all the PDF files not only the one I created. When I opened on another computer or if I open the file in Acrobat Reader, the copy is displayed in black as it should be. I'm on a MAC 10.6.8. THX!

  See if "Replace color of document" is selected in the accessibility preferences.

• Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

  Hello

  I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

  No help for it?

  
  

• What do you do when the screen starts to turn upside

  What do you do when the screen starts to turn upside

  Hello

  Please try this (Windows 7)

  Press the keys Ctrl and Alt at the same time then the arrow key press upwards (or downwards).

  Or fix this way

  • Right-click on an empty distinguished on desktop
  • Select Customize
  • Select display
  • Select change display settings
  • Do not use returned to the Orientation box.
  • Click OK/apply

  Kind regards.

• Music player stopping when the screen is locked

  I have a problem with the music, stopping to play when the screen on my Defy lock.

  He does that you use the speaker or the headphones.

  I never used to do this, and I wonder if I clicked something in the settings of /preferences that makes close the player.

  Any ideas please?

  Thank you

  Richard

  What to do with Advanced Task Killer?

• cannot answer phone when the screen goes black

  I have the PE. I also have the unchecked box that says to finish the call with press the button (when the screen times out). How can I answer a call once the screen has expired without pressing a button that ends the call?

  
  

• Why does my internet work randomly even when the screen saver is turned off?

  When I connect and start the computer to the top and all, computer speakers begin to work as if I was already on the Internet. When the screen saver went off the screen and the screen is black, you can hear the speakers go to random times, as if I was online but I'm not. Need help please, my computer looks like its haunted by video ads. This was initially the Visa Commercial card, secondly the advertising of McDonald's.

  My updates are not updated, I also tried for two weeks, I need help here too. I have now accumulated 17 updates to download, but they do not.

  WIndows XP

  Use the link below to search for viruses you machine.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.

• Can not see the notification when the screen is locked

  When adding exchange (outlook) account, and because it requires security settings, I'm not in a position more to see notifications when the screen is locked.
  I deleted the exchange account, and notifications are visible when the screen is locked.
  To confirm, I added my exchange account again, and notifications is not visible when the screen is locked.
  I need to unlock to see the notification.
  How to solve this problem to take advantage of this last feature.
  Thank you.
  Saami.

  Topic locked as response has been received and there is already a topic about this.

• music player when the screen is locked

  Hello.
  Some devices show a practical widget when the screen is locked, but not of compact z1.
  I usually listen to music on spotify and when I received a call, the cell phone showed the widget on the locked screen. Not to mention that I was able to control spotify with the headset control.
  Then I stuck the screen again and it no longer works.
  I tried to find a configuration, but I couldn't.
  Can someone help me?
  Thank you

  Disable or remove the smart key and see.