Portege R830, Win7 64 - Fingerprint Software update fails at startup

After the Fingerprint software version 2.0.06409 update as recommended by Toshiba TEMPRO, a system message appears to stop and start: "TFPU LogonUI.exe Entry Point not found. The entry point of procedure... not found in the TFPUCommand.dll dynamic link library.

The system cannot use connection of fingerprints. After logging in using the name and password of a standard user, the software itself runs correctly, by contacting the fingerprint sensor.

Worked fine just before update.

Hello

Have you tried to reinstall this software of fingerprint?

Firstly uninstall the fingerprint tool preinstalled.
Clean the registry (for example, by using a 3rd party software CCleaner) and restart the laptop.
Download the utility of fingerprinting of driver Toshiba UE page and install the software.
Reboot the laptop once more and test functionality.

Tags: Toshiba

Similar Questions

  • Portege R830 - use of fingerprinting as part of Windows 8

    I have big problems with two drivers Toshiba on my Portege R830 computer in Win 8 Pro 64 bit upgrade.

    I did a clean update on a reformatted hard drive, then went to install display drivers and that totally crashed my machine out.

    When I put in my IDs of the machine would do a reboot of the force.
    Finally, I am in safe mode (with SHIFT-restart the login screen) and was able to fix it and remove the driver.

    Then I installed the utility of fingerprinting, this week still downloaded from Toshiba for my machine.
    He even marked as "new".
    That actually worked, in a way, but it caused my login icons user on-screen connection prior to appear as duplicates.

    Took me forever to understand it is the utility of fingerprinting and when I removed the user icons are returned to normal.

    So now the fingerprint reader is useless for me.
    In the hope of a solution soon.

    > So now the fingerprint reader is useless for me.
    > In the hope of a solution soon

    Have a look here:
    * Windows 8 Upgrade - Notes and Restrictions *.
    http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

    Software reader Toshiba fingerprint + _ + _

    _Issue description: _
    Toshiba Fingerprint Software is not supported under Windows 8. Fingerprint records will be lost during the upgrade process.

    * Note: *.
    + Remember your Windows password. You will need to enter after the upgrade. If you have a fingerprint reader, fingerprint records will be lost during the upgrade process, which is connected to the Windows 8 will not be via a fingerprint authentication more. +

  • Software update failed

    We have a server terminal server (RDS) on Windows Server 2008 R2 SP1. There are about 20 + users and almost everyone uses Firefox as their default browser. Version 18.0.2. When I run updates of FF, I do once logged as administrator when nobody else is logged on. However, for some reason, a couple users receive the message failed update of generic software when you start Firefox. If you click ok, FF starts anyway, and when you check the version, it actually tells 18.0.2 but prompts the user to restart to apply the update, which fails again. How can I erase this update check or instances of Firefox to realize that it IS up to date? This is the first time I saw this question, we use Firefox on this server for years. Help, please. I already read this article, nothing helped:

    https://support.Mozilla.org/en-us/KB/update-failed-error-message-when-updating

    Hello kfishasi, version 19.0 is the latest update of firefox, it came out yesterday, 19 February 2013, try to Update Firefox to the latest version as an administrator when nobody else is logged and check again.

    Thank you

  • Xperia Z2 will not turn on - error message: software update failed

    Hi I would appreciate help! My Xperia Z2 aged for 4 months worked fine until today. It was connected to my Mac, and I was asked to update the bridge of Sony for Mac.. After about 10 minutes he said failed update on the computer. I unplugged the phone, but now the phone turns - all I get is an error message indicating "echec failed software update, make sure that your phone is connected to the computer and try again."

    However, when I connect it, the device is not recognized.

    I can not turn off the phone or, all that happens is a continuous loop of red light, then the error message (it is supported at the moment)

    Can anyone help?

    You should rather bridge of Sony.

  • Q10 of blackBerry software update failed

    I tried to update my software (version 10.2.1.2977), but every time I do it just indicates the update has failed. Access to internet is very good and it is connected to a power source, but nevertheless does not seem to work.

    Hello and welcome to the community!

    You did not reveal what software update method, you try, so I think that you try updating wireless on the device. I recommend to renounce this attempt and instead try the following:

    Good luck and let us know!

  • MS11-057: a security update Cumulative for Internet Explorer 7 for Windows XP (KB2559049) + software updates fails SCCM

    Morning Microsoft,.

    I am facing a problem in my office environment (Windows XP SP3, Internet Explorer 7, software Trusteer report is NOT installed). We are trying to deploy a package to update all the post-SP3 XP critical and security patches and have problems with the update above.

    We use the SCCM synchronized with our server WSUS software update to deploy updates and it works very well in most parts.

    However this particular update appears to install (that is listed in Add/Remove Programs) However whenever the client checks for updates Windows he sees this as available, download, try to install it and indicates that a reboot is required... After a reboot, he's stuck in this cycle, each time that the client checks a Scan software deployment.

    It was on our test PC at the moment we have so removed from our upcoming updates and aboard. Everyone knows this and they can advise?

    Here are some excerpts from a newspaper of the customers on the update of the files

    WUAHandler.log (ignore the stop bits listed here update that installs very well)

    Async completed research.    WUAHandler 29/08/2011 09:55:58 6128 (0x17F0)
    Successfully completed the scan.    WUAHandler 29/08/2011 09:55:58 1788 (0x06FC)
    Go to search using the WSUS update source.    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous looking for all the updates started...    WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
    Synchronous successfully looking for updates.    WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update: 5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: dfec6275 - 7 d 47-4da6-bcee-d4f20e57acee, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update: 5f08af04-7832-452f-9206-4289ed36f1b4, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Update: a9278996 - 22 c 7-4f60-9bd3-540d291c4bfd, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB980182) (5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    2 update (Missing): update rollup for the ActiveX for Windows XP (KB2562937) stop bits (5f08af04-7832-452f-9206-4289ed36f1b4, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
    Async updates installation has begun.    WUAHandler 29/08/2011 10:06:10 6032 (0 x 1790)
    Update 1 (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) completed the installation (0x00000000), reboot needed? Yes WUAHandler 29/08/2011-10:06:34 6060 (0x17AC)
    Update 2 (5f08af04-7832-452f-9206-4289ed36f1b4) completed the installation (0x00000000), reboot needed? No WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Async completed installation.    WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
    Installation of updates is complete.    WUAHandler 29/08/2011 10:06:43 3184 (0x0C70)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:06:43 6032 (0 x 1790)
    Async completed research.    WUAHandler 29/08/2011 10:07:51 5740 (0x166C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:07:51 4644 (0 x 1224)
    Update (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) has completed the restart of the post operation. HResult: 0 x 00000000.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async updates using WUAgent search began.    WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
    Async completed research.    WUAHandler 29/08/2011 10:40:29 3628 (0x0E2C)
    Successfully completed the scan.    WUAHandler 29/08/2011 10:40:30 5636 (0 x 1604)
    Go to search using the WSUS update source.    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous research began using the filter: "UpdateID ="7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe"AND DeploymentAction = *'...»    WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
    Synchronous successfully looking for updates.    WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update: 7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102 BundledUpdates: 1 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Update: a7c0649d-f81c - 40 c 1-b247-b4e6bb990c8a, 101 BundledUpdates: 0 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB2559049) (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102) WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
    Async updates installation has begun.    WUAHandler 30/08/2011 09:27:15 3848 (0x0F08)
    Update 1 (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe) completed the installation (0x00000000), reboot needed? Yes WUAHandler 30/08/2011 09:27:39 1656 (0 x 0678)
    Async completed installation.    WUAHandler 30/08/2011 09:27:39 5840 (0x16D0)
    Installation of updates is complete.    WUAHandler 30/08/2011 09:27:39 3848 (0x0F08)

    It is a forum for specific consumers. You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

    =======================

    You can encounter errors related to connect temporary [p. ex. 0x80072EFF; 0x80072EFE;] 0x80072EFD; 0x80072eef; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0X8024402F; 0x800705B4] when you use Windows Update or Microsoft Update [but not necessarily WSUS! ]  to install the updates
    http://support.Microsoft.com/kb/836941

  • BlackBerry Blackberry Software Update Fail on Z10 10

    Hello world! I am trying to update the latest version of the software on my Z10 using WIFI BT, but he arrived at 34MO and continues to be paid to "interrupted update", I did that there is enough storage space in my camera but still the same events. It makes me crazy! Someone else had this problem? Have you found a solution? Any comments will be greatly appreciated.

    I recommend not preforming a more air day because they tend to miss from time to time due to the fall of the signal. I recommend using the BlackBerry link to device software update, so there were no interruption as long as the usb cable is not disconnected.

  • BlackBerry Smartphones Software Update Fail

    I have a Curve 9350, and I received a notification this morning that I got a software update, so I accepted and he is trying to do the update on my real mobile, (not the Manager Office via a PC), but is currently blocked to save the social stream 0% and 9% in all data , and he was blocked for about 3-4 hours. Please HELP as I can't use my phone and its my business phone!

    Try this,

    • Remove the battery from the device.
    • Connect to the PC and launch the BlackBerry Desktop Software.
    • Replace the battery of the device and let it boot.
    • Are you aware of any update or that the appliance needs of the operating system installed? If so, complete the upgrade so that plugged into the computer.

    If the backup block again at 10 - 20% on the social backup module feeds, please let me know.

    Also, please check your private messages here in the forum to me.

  • Re: Portege 500 Sync and Fingerprint Software on Vista

    HI - have recently resolved the synchronization failure by removing the true Suite Access Manager (finger printing software). Vista invites you to reinstall the software when you restart, which I did download from the Toshiba... and we're back to the synchronization does not again.

    All work through this issue? Any ideas?

    Hello

    There is new software available for the protégé R500 Fingerprint.
    This time it s a 2.0.2.0 version.

    I recommend to download and reinstall the application.

    Good bye

  • Portege R600-11 q - Fingerprint software specified cannot be opened

    Hello

    I have a problem with a R600-11 q: software digital footprint "TrueSuite Access Manager" does not work properly.
    If the user attempts to save a new imprint, he gets the following error:

    Error: could not open database specified.

    The same phenomenon occurs, if it attempts to delete all saved fingerprints. The error occurs in all trial accounts (local administrator, domain administrator, domain, user)
    The Windows login through fingerprint ist also does not work.

    I already uninstalled the one software package installed the last version, but I still get the same error. Perhaps, there are some fragments of the previous installation, but I can not find. The program-folder has been deleted every time, when the software has been uninstalled by the uninstall routine.

    OS: WINXP SP3

    Someone at - it tips?

    Thanks in advance :-)

    SF

    Post edited by: lichtbogen-online changed the subject to a more clear descriptipn

    > What means re-install "common Modules"? Only the 'Toshiba-clean' - features will be resettled?
    Common modules is a tool of Toshiba and its necessary in order to run other tools of Toshiba.
    You can download it from the page European driver Toshiba. At that time its common Module v 6.06.01.

    I recommend you to uninstall the software of the fingerprint again.
    Then to clean the BONES and the registry using CCleaner. Repeat this several times.
    Then download it * last * fingerprint AuthenTec software (search and google) and install it again

    Welcome them

  • The software update failed!

    Hello

    I received a notice received yesterday on my sony Xperia Z3, request an update by using Sony PC Companion, I did it and then he said that a network problem occurred, and from there, when I try to power the phone it says "echec failure of the update of the software, make sure that the phone is connected to the computer and try again."

    I tried the "power button / stop + volume up" when loading, the phone has started feeding and turns off all the time and after an hour it's been really hot! I was so afraid, so I unplugged it. One moment, I ran out of solutions.

    Please tell me I lose my Z3 1 month already, please.

    You may need to perform a repair of software using PC companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

    Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

    Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

  • Z10 Z10 blackBerry software update failed! :(

    Good morning!

    PLEASE HELP ME! My Blackberry z10 has to update the software and I can only be updated via the BB link or web. Problem is that the update maintains not! "An error occurred when downloading software for your device. Please check your internet connection or try again. "This keeps popping up and my internet is on all the time! Why would he do that? the so-called 'pop-up' on the site of BB to run the update from the web is not pop up! it so im so tired of this! Please help me! IM really need a hero of BB! As soon as possible!

    Thanks Stephani

    XOXO

    Nevermind found the solution me, had using Internet exporer... it's good for something hahahaha

  • Smartphones blackBerry blackberry 9220 software update fails now can't open my device. Help!

    Hello! iIm, trying to update my software blackberry 9220 however, during update, my computer does not recognize the device. I remove the usb cable then try to unlock my phone but just have an "App Eroor: 200 ' and an option to reset... I click Reset. then it just goes back to the app... error what should I do?

    Hello yhayen03

    Welcome to the Forums of the BlackBerry Support

    Please try this Knowledge Base to resolve your issue with this error:

    KB11320  : How to perform a reload own BlackBerry Device using BlackBerry desktop software for windows software

     

    I hope that you already have a backup of your device, or if the device initially allow you to make a backup.

     

    Additional information can be found here:

    KB30100 : "JVM 200" appears on the smart phone BlackBerry.

     

    Try it and tell us if you feel any problem.

    VIA | prince2012

    http://supportforums.BlackBerry.com/T5/BlackBerry-Curve/error-app-200/m-p/2484385#M200531

  • BlackBerry software update failed Smartphone, cannot use the phone, but can attach to the computer access to the Internet.

    How to fix the phone. Software of office says "cannot communicate with the device.

    Hi and welcome to the Forums!

    Good job on the recovery! But all is not lost for your data. If you did the update via your PC, then in the early stages of the process should have been a backup of your data (assuming you do not defeat this feature). If you're on a PC, then look for in your entire hard drive to a file with the extension of the IPD (*.) IPD)... check the date and time of the results... created more recently is your best candidate and if all goes well, it was created at the time you did the update. Use this procedure to restore this file:

    • KB10339 How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file

    If you use a MAC, I don't know how he does things, but maybe this KB is useful:

    • KB18776 Back up and restore BlackBerry smartphone data on a Mac using BlackBerry Desktop Software 2.0

    If you performed the update OTA or otherwise circumvented the backup data, then you are indeed no chance.

    Good luck!

  • Failure of the software update, try to disable to load but it lights again and again

    Hello, I installed Lollipop but PC Companion insist an update exists I was completed by a faulty update of software startup message, my mistake was trying to update with the battery with 65% of the load. And don't remember not what happens, but I'm done with the software update failed error and the phone switch works and market with the same message, I read the other post about turn off and load, but I turn off with the little red button to force it, but if I connect the magnetic cable or usb cable to power it on again , I force to turn off and and the phone turns on again (with the message update failed). It is this normal? I left more time on the phone like that but "load", this will dry the battery? What do I do? Thank you

    Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

    Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
    Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

    If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

Maybe you are looking for

  • Question of pass/fail counter. [Help]

    Hello! Can someone help me please understand how to count the number of Passed and Failed samples below? Each test samples must go through the series of test procedure (Test - 1, 2, 3 &) and I need determine if the sample has passed or failed based o

  • Since the game The Sims DVD ROM, it has black resident of both sides of my screen

    Original title: why after someone using the screen of my laptop dvd player become less than full page and enlarge it does not help either? girl plays the sims then all pages size is 11/2 Inc. black on both sides of the page?

  • product key used on counterfeit xp

    I'm done with a counterfeit version of xp after that I couldn't find mine. He had a bad product key that was was not usable. I have a produt key I found for my version that I couldn't find. Can I now use it now on the counterfit one? It is valid...

  • How to delete many files duplicate music in Windows Media Center

    How to remove several duplicate files Windows Media Center music I am running Windows 7 64 bit with Windows Media Center and I have a 2 TB external drive, I keep all my multimedia (music/movies) and I just realized that my entire music library has be

  • DxDiag cannot start...?

    I'm confused, and I try to get the post a DxDiag log to another question I currently have and whenever I go to dxdiag.exe, he tells me, "failed to start. I tried to update to the last, but I got an error such as: "an internal system has occurred. Ple