Portege R930-122 - Toshiba VAP REGDB get impossible point Win7 Pro 64-bit

Similar Questions

• Satellite L550 PSLW8A can only get OEM Win7 Pro 32-bit to 64-bit?

  Hi all

  I am writing from Australia.

  Two weeks ago, I bought a new laptop Toshiba ([http://tinyurl.com/ye6jkuq]) with the following characteristics:

  Model: Satellite L550
  Reference number: PSLW8A-01101F
  BIOS: V1.60
  CPU: Intel Core 2 Duo CPU P7450 2.13 GHz
  RAM: 4 GB
  HARD DRIVE: 500 GB
  OS: Windows 7 Professional 32-bit (OEM preinstalled)

  My question:
  How can I switch to Win7 Pro * 32 - bit * for Win7 Pro * 64 - bit *?

  If I use the recovery disk (the hidden recovery partition) utility to do a clean reinstallation of Win7 Pro, I will give the choice during the process of resettlement of the installation either the 32-bit version or 64-bit?

  Or I have + not + get the choice at all and simply be limited to the OEM Win7 Pro 32-bit that came pre-installed version?

  All advice or information about how to pass OEM Win7 Pro 32-bit to Win7 Pro 64-bit would be appreciated.

  Nick

  Hello

  AFAIK almost all new laptops are available with 32 and 64-bit OS and two recovery images are saved on the HARD drive.
  When you start installation HARD drive you should see the option to choose which version must be installed.

  Simply start the installation of HARD drive and you will see what menu you will see at the beginning. Not be afraid to do so. Nothing will happen.
  Real OS installation starts two steps later. If you can not damage preinstalled OS.

• I have a Toshiba Satellite A135-S4827 running Windows XP Pro (32 bit). If I install Windows 7, 64-bit and how?

  I went to the Toshiba site to get the program to convert 64-bit for Windows 7, but when I try to run it tells me I have the wrong OS for the program. He wants to see Windows 7, but I was not able to install it. How do I completely clean the current operating system and start over?

  Hello

  Your laptop's CPU is a 32-bit version that can not work with Win 7 64 bit OS, you must obtain a 32-bit version.

  See your CPU spec linked below,

  http://Ark.Intel.com/product.aspx?ID=29740

  Slan go foill, Paul

• Toshiba VAP does not work in Win7

  Is that someone have Windows 7 issues compatible with Toshiba value added package with Windows 7?
  His avalibe for Vista and Windows 7 but it doesn't do anything under Windows 7. I can't change my brightness or switch off the lighting on my laptop.

  If someone has had this problem and if so, is it fixable?

  This PPV is version beta and if check you what is written on the download page for this package, you'll find follow the instruction:

  + This beta software is provided on one - is the base. Use at your own risk. +
  + Beta drivers and utilities are sometimes provided by manufacturers of components like the pre-release for quick bug fixes and access to new features. * Beta software is not fully tested by the manufacturer or by Toshiba and may include some important it is the responsibility of the user to protect the system and your data using software in beta with Toshiba products. It is strongly recommended that users back up their data before using beta version software from any source. Please make sure that the most recent published software is not already displayed at support.toshiba.com before installation and use of software in version beta. Software in beta is offered as-is and carry no warranty or support services. +

  At the start of Toshiba Win7 support we will get complete tested and support tools and utilities. For the moment, you can have this beta stuff only.

• Impossible to install Silverlight to watch Netflix on my Win7 Pro 64-bit

  Did all THE steps, given to me by personal assistance and the MS tech... Nothing, strange thing is, it works on my laptop 32 bit Win7Pro!

  Not nice to watch movies or DVDs in a laptop... BlueRay is installed in the non-portable PC

  What browser you use, Internet Explorer, Firefox or Chrome?

  If its Internet Explorer:

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Try again to download and reinstall Silverlight.

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• can not get updates of July 2016 Windows to load, so I can install on Win7 Pro 64-bit

  See above

  Apply update rollup convenience following manually:
  http://support.Microsoft.com/en-us/KB/3125574

  and
  https://support.Microsoft.com/en-us/KB/3161608#bookmark-issues

  Restart your computer, and then try again.

• problem to get internet with SIM card on the probook 6550 b win7 pro 64-bit

  Hello.

  I'm trying to connect to the internet with a SIM card on my Probook 6550 b with win 7 Pro - 64 bit

  I tried an external USB (called Globesurfer icon) device that works on computers running XP, but I can't make it work on mine.

  I tried to put the SIM card directly into the location corresponding to the battery. Nothing happens when I start the computer, and there is only two options in the wizard wireless (WLAN and Bluetooth)

  I tried to download and install a file (called sp53068) on the HP support site which was supposed to install the drivers for internet cell phone. It is a DOS window, and he said a sentence. Then it just closes.
  I also tried to install all the application files that extracts of the sp53068 in c:\swsetup\SP53068, but they have the habit of work.

  Please help me with this problem. Right now this is my only option to connect to the internet from my laptop.

  In advance, thank you for any help.

  Hello. I just wanted to say that the "mystery" is solved. Simply the USB device doesn't work because it only supports cooperative systems up to Win7 32 bit and no further details. I have 64-bit, so it's a 'no-go '. Thanks for you time.

• Portege R930 - 15G - lack of security of Toshiba Assist Module

  On my new Toshiba Portege R930 - 15G I can't call the "Toshiba Assist security" module and only get the message 'a required module is not installed.

  If a Toshiba support person is reading this forum, I would be very happy to get a hint of what source I was able to download the required installation files.

  Maybe someone else has an idea how to solve the problem.

  Andreas

  > I can't call the "Toshiba security Assist.
  Can you please tell us how do you do that? Are you using the original preinstalled OS or the clean version?

  On the Toshiba download page, you can find this tool, version 2.0.9. try to download and install it.

• How to get Nero to Win 7 on Portege R930 after the new clean install

  I have a new Portege r930.

  The Lalonde was formateed and install windows 7 x 64 enterprise as all systems within our Organization.
  Everything is ok, but is anyway download nero, which is included in the original installation, and install it after format?

  I created the recovery discs four system, but this app is not installable in any one of the four discs

  Thaks.

  > Everything is ok, but is anyway download nero, which is included in the original installation, and install it after format?

  Non-Toshiba tools and software that are part of the image of preinstalled Toshiba cannot be downloaded separately. You can use this software only as part of image of Toshiba.
  If you have installed your own system, you must purchase the software.

• Portege R930 gets hot enough

  My Portege R930 (PT331E - i7) becomes quite warm today, earlier it was very silent, now the fan is 70% most of the time.

  I open the bottom cover and checked the cooling paste on top of the processor - seemed rather dry.

  Should I change the dough? I cleaned the fan.
  What can I do else?

  Thank you
  / Anders

  Hello

  If you have already removed your laptop and cleaned vents and grid cooling cooling you can also change the FAT if you know how to do this. I mean, why not. Laptop is already open.

  Usually after the computer cooling system laptop cleaning should work a lot quieter. A few years ago I did this on my machine. I found so much dust inside which blocked the air flow.

• Can CPU overheating if Portege R930 goes into sleep mode?

  I have an a Portege R930. I run an application of 25-30% of the CPU for long hours. If I put the laptop in mode 'sleep', the calculation get suspended? If not, and it is still running, how the CPU is cooled when the fan is off mode 'sleep'? The CPU can overheat?

  I * don't * want my program from several hours to be interrupted by a detector from overheating. If I know that the program is suspended in mode 'sleep', I fear enter "standby" mode. If this isn't the case, so I'll keep the laptop awake, and if I need to carry the laptop, I'll put it into hibernation.

  The answer seems to be that the CPU cannot fire because the programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014

• Portege R930-C086 - how to recover the Windows 8 serial key?

  I have Toshiba Portege R930-C086

  my hard drive is broken, I lost all my data and the original windows 8
  so I want to buy the new HDD, and I want to know how I got my windows 8 key back?

  I don't want to buy the new windows 8.

  Each laptop comes with preinstalled operating system also preinstalled recovery media Creator called tool. This tool can be used to create bootable recovery DVD or USB media. This recovery media can be used in case this recovery HARD drive installation procedure no longer works or if the HARD disk fails, as in your case.

  I presume you didn't create this media, right?
  Is that you can order the original recovery image but is not free.
  More information, you can get the Toshiba service provider in your country.

  I don't know if you can order it on https://backupmedia.toshiba.eu/landing.aspx but please check.

• Portege R930: cannot use the keys FN under Win XP

  Hye

  I'm French. I'm sorry, but my English is not good. I'll try to explain my problem

  Yesterday, my boss gave me a new computer. It's a PT330E Portege R930-1FE with windows XP, 7 has been uninstalled

  I can't turn off my touchpad. I can't use the Fn key.

  I called technical support and after I downloaded the drivers for seven 32-bit and 64-bit... But I still have my problem

  Please, you have a solution.

  Thank you

  Hello

  Fn keys are controlled by special tools of Toshiba and depends on the running system.

  Using Win XP, you need to install the common Modules and this must be done first. The common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  Check this box:
  [Common Module Win XP v6.07.03 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 83752 & OSI D = 10 & driverLanguage = 42]

  To get the other buttons FN working (ie the screen switching output), you must install hotkey utilities for display devices
  [Utility Hotkey for display v1.0.2.5 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 83758 & OSI D = 10 & driverLanguage = 42]

  In order to disable the touchpad, you need to install Touch Pad on / off Utility
  [Touch Pad on / off Utility for Win XP v2.5.5.1 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 83770 & OSI D = 10 & driverLanguage = 42]

  I recommend you to check the page of the Toshiba UE driver and install all the available drivers for Win XP.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Need PCI Simple Communications Controller driver for Win7 for Portege A600-122

  Hello

  I put Windows 7 x 64 on my Portege A600-122 and have a "PCI of Simple Communications controller" in Device Manager. It seems that it is because the Intel AMT (Active Management Technology) driver is not installed.

  I am struggling to find it, there is a [driver Windows 7 x 86 | http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]

  and a [driver Vista x 86: http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]

  but I can not find a driver Windows 7 x 64, will make one of the above, or there at - it another link to the x 64 driver?

  Thank you

  Hello

  Please, try to download and install:

  http://www.DriverCure.com/driver/driver_captcha.php?device_driver_id=5CFDA707-11B0-4FEC-8C89-65E3E4EA9AFD