Portege R930 brightness increases when the shiny things are displayed

Similar Questions

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• What happens when the error report are sent to Microsoft from my computer?

  I received a call from a Clayton asked for a Windows Service Center. He called about the error reports that were sent from my computer to Microsoft. He gave his phone number as 91 9008 37 23295 in Calcutta, India. If this has nothing to do with Microsoft or Windows?

  John is correct.  And to answer your direct question: "what happens when the error report are sent to Microsoft from my computer? -Not much.  If these reports are used at all, they are used for the statistical analysis and do not respond to individuals.

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• Will the virtual machines in the space are automatically deleted when the protected group are removed

  Hi friends,

  Will the virtual machines in the space are automatically deleted when the protected group are removed?

  Thank you.

  Hello

  When you choose to delete the Protection Group, first virtual machines are unprotected and placeholders are deleted.

  Michael.

• Why Muse does not once (Proxima Nova) when the other versions are installed on my computer? The police also does not appear in the system fonts.

  Hello

  I want to use web fonts Proxima Nova (as woff) in Adobe muse on my site. These fonts are on my computer.

  The otf and ttf files are also installed on my computer, but they do not appear as sytem fonts in Muse.

  When I try to add the web fonts for Muse, it gives an error.

  
  Can someone tell me how I can get Proxima Nova as a system font in Muse?

  Thank you!

  In the version of June of Muse CC 2015 Typekit fonts have been integrated into the Adobe's Muse.

  Please try following steps to add them to your list of Web fonts.

  1. go into file > add/remove both

  2. Select the tab for typekit and "Proxima Nova" police search

  

  3. Select all, and then click OK

  4. these fonts will be added to the list of Web fonts.

  

  You can also check out the link below which has documentation for the same thing.

  https://helpx.Adobe.com/Muse/using/Typekit-Web-fonts.html

  Concerning

  Vivek

• How to set the orientation of page with postscript when the pdf file is displayed in Adobe Acrobat format?

  I have a program that generates a postscript and then 'prints' the script in a PDF file using gs.

  The user can opt for the document in landscape format.  The program handles this with the addition of the 'Rotation 90' command early in the script.  It works without problem.  When the user opens the PDF file in Adobe Acrobat, it is displayed in landscape orientation.

  In addition, the user may have a "watermark", adding the document which is the text at an angle of 60 degrees.  This is handled by the emission of the "rotation of 60", then the text of the watermark, then "rotation-60.  This also works without problem.  The resulting PDF file has watermark text at an angle of 60 degrees to the rest of the text in the document.

  The problem is when these two options are used together.  The document is correctly mounted (in orientation landscape with a watermark properly tilted), but it is displayed in Acrobat in portrait, forcing the user to rotate to be able to read it.  When I look at the postscript, it seems OK, just the sum of these two options:

  rotation of 90

  things...

  60 rotate

  ... watermark text...

  turn-60

  ... the rest of the document...

  'Net turnover' is 90, leading me to believe that it would be displayed in landscape orientation, but it is displayed in portrait mode.

  There is no other sizing page not declared in the script.

  How can I get the document to display in the landscape when opened in Acrobat?  Thank you.

  Check to see that the 'gs' (ghostscript) isn't reorienting the page, by default, based on what he thinks is the correct meaning of reading.

• When the XP drivers are available for the Satellite A100-599

  First of all, Hi all the toshiba dear family! I came with a few questions then please help me:

  1. which A100 series includes A100-599? (ex: PSAAN, PSAA8, PSAA9..)
  2. when the drivers XP will be available at the Web site for A100-599?

  Thank you...

  Hello

  No one knows exactly release it the time of pilots
  I noticed that Toshiba published new drivers every day and in my eyes, you should check the site of the driver s from time to time.

  As you know that XP drivers are already available for another series A100.
  If you want you can test these drivers and don t worry, damage you the laptop will allow you to install these drivers. ;)

  Good luck

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• How to edit scanned documents when the output options are PDF files

  I have a printer of HP Photosmart Plus b209a-m.  How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?

  The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan.  But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.

  Thanks for your help,

  Jim

  JSD says:

  I have a printer of HP Photosmart Plus b209a-m.  How I edited the documents I'm scanning when the 3 output options are to create PDF or Tiff files?

  The button "scan" on the window of HP solutions says that you can "analyze and edit text with or without graph documents." Also, this website solutions indicates that I can edit documents that I scan.  But the 3 output to 'scan' options to create a PDF file, to send a PDF file or to create a Tiff file. I think that all of these types of files are not editable. I was not able to find an option to create text or Word files.

  Software that comes with the printer HP Photosmart Plus B209a there OCR package in it. However, we can always install it by simply following procedure below:

  (1) perform a disk cleanup. (Start > all programs > Accessories > system tools > disk cleanup)

  (2) open the link below and save it on desktop OCR software

  FTP://ftp.HP.com/pub/Printers/ocragent/hpcom_OCR_140_003.exe

  (3) run the file after the download is complete.

  (4) if the error is displayed to indicate "this update does not support all of the HP device... ", do not close the message. It is very important.

  (5) open file folder

  (6) file open 7z

  (7) find the folder "ocr_web_pack".  Copy this folder on the desktop.

  8) click OK in the error message

  (9) open the "ocr_web_pack" file that is copied on the desktop and double-click "SETUP. "EXE" file

• Hit by sliding does not work when the word suggestions are turned off

  Hello

  I wonder why input gesture to typing on the keyboard is grayed out when I disable Word suggestions? I don't want Word suggestions and I don't often type in English, but I would still like to be able to type without raising my finger on the keyboard. Anyone know if this can be done on Android Lollipop?

  Well, the whole point of this gesture of strikes is that the phone indicates word based on what letters you put your finger on. If he would not suggest any word, you wouldn't be able to type any word, you could only make words with the letters that are side by side on the keyboard.

• PC goes mode sleep when the Power Options are set for ever, etc. also can not wake up

  Hi, I read the other posts on this topic, but my problem seems a little different.

  I am running Windows 7 on a Dell desktop computer and I tried to run chkdsk and also the Dell diagnostics that I have some problems hard drive; However, it gets so far and the pc goes into mode 'sleep' causing me even worse problems that chkdsk/diagnoses are halfway through a volume. The pc has done this on and off tension for awhile, but hopefully not when something critical is running, even if it is a nuisance.  I did all the steps recommended here as ensure my Power Options are set, etc., but he always does.

  In addition, when the pc goes to sleep, I can't wake him up by pressing the power button or any key on the keyboard.

  I've been in contact with Dell and they said that it's a software problem.

  Someone can suggest something else I can do (stop) the computer mode 'sleep' and also how to wake him.

  Thank you.

  Hello

  I'm sorry for the late reply.

  As you mentioned in your previous post, you wanted to know how to boot from the disc, I've provided the steps how to boot from the disc on my previous post. However, you can try to repair your windows using DVD for Windows 7 backup and check.

  You can see this Microsoft article below that will help you fix Windows 7.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Let us know if you need help most.

• Is there an event when the mobile connections are changed

  Hi, expert,

  I'm looking for an auditor check the following:

  1. when the phone is connected to a mobile network not connected

  2. when the phone is connected to another mobile network (another carrier or wifi) from current network

  3. the current mobile network connection is dropped.

  I found of initailly than ConnectionAttemptLIstener (http://www.blackberry.com/developers/docs/5.0.0api/net/rim/device/api/io/transport/ConnectionAttempt...). I thought I could use it to change mobile network connection. It turns out that I just couldn't. He listens to the event on ConnectionFactory which really is a connection on the connected mobile network.

  Did some research and I could not find any related information.

  So is it possible for me to achieve what I said at the outset?

  You can use a combination of CoverageStatusListener and RadioStatusListener to have access to these events.

  CoverageStatusListener will let you know what type of network access you have access from your coverage (by cell phone connectivity, etc.) WLAN network and which network transports are available).

  RadioStatusListener will let you know when the changes on the cellular network occur as signal changes, changes the base station etc.

  RadioInfo class can also be used to receive information on the current mobile network too.

  Kind regards

• InDesign 2014 E-mail hyperlink does not work when the interactive pdf is displayed in a tab in the browser

  When we create an interactive pdf in inDesign CC 2014, the e-mail link does not time the 'topic' and 'to' when the client opens in a browser view. Works fine when downloaded and opened in Acrobat, but most customers will use the browser method. How does one solve this problem when making the PDF, or, how does one prevent the PDF to open in a browser? There was once a "prevents the opening in the browser" in earlier versions of Acrobat, but it isn't here in xi Acrobat. Thank you, in advance!

  You can solve by the PDF, that so fine because in Acrobat, then the link is OK. You also can not prevent to open in the browser, because the browser manages how to open a PDF file. PDF included browser readers can be turned off or there are (probably) settings always open the PDF file in an external application (Adobe Reader, etc.).

  However, I also create PDF files of in Indesign (although non-interactive ones), which include hyperlinks for e-mail, and put it on our Web site. If I use Chrome and click any PDF link, it opens in the browser and hovering over an e-mail address reveals the mailto: link (subject not included, is not serious in any way) and a click opens my mail client. Works perfectly.

  Can you provide a link to one of your PDF files online for testing?