Portege R930 - why four partitions win 10?

Similar Questions

• error 0xc004e003 during activation of Win 7 Pro on Portege R930 - 17 L

  Toshiba Portege R930 - 17L
  S/N: 5D016093H
  (If I search on Toshiba after SN I only find in Toshiba - Ukraine)

  Bought at the shop online "Sigmanet" in Romania.

  It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
  He arrived with the installation of Windows 8 CD.
  Now, it has been pre-installed Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)
  Of course, the preinstalled operating system has been slow and gave errors (pre-installed McAfee antivirus, a bunch of small apps, a.s.o.)

  I reinstalled Windows 7 Pro SP1 x 64 (original CD) on a clean partition.
  I can't activate it with the following text:
  Product key: XXXXX-YYYYY-ZZZZZ-XXXXX-YYYYY
  Product ID: xxxxx-OEM-xxxxxxx-xxxxx
  Error code: 0xc004e003

  Now, I spoke with the Microsoft Romania, they tried to help me, but they failed.
  They told me that the license seems stuck at Toshiba, so they suggested to speak to them (Toshiba) to unlock the license or provide a new product key.

  So, I contacted the seller. They passed me at the service of Toshiba authorized in Romania which avoids to help me.

  Now I'm stuck. What to do or who to contact. Everything is so blurry...

  I appreciate any response you can give me. Thank you!

  > It has a sticker on the back w / Windows 8 Pro (small sticker without product key).
  > Happened with Windows 8 installation CD.
  > Now it was preinstalled Windows 7 Pro x 64 SP1 (this laptop has the right of use of Windows 8 and Windows 7)

  Laptop Toshiba computers are preinstalled with Windows systems that are already activated.
  The stickers that you will find at the bottom of the units are the serial OEM key and these keys don't work in relation to other different systems. The OEM key belongs to the preinstalled image.

  So in case you would use the Toshiba Recovery disk and install Windows system using this disk, the serial key is not necessary.

  According to the technical specifications of Toshiba:
  http://www.Toshiba.co.il/en/laptops/Portege/r930/Portege-r930-17L/ the laptop has been pre-installed with Windows 7 Pro 64 bit.

  This means that Win 7 Recovery DVD was not part of the package. Why?
  because the Toshiba Recovery Media Creator software has been pre-installed on this laptop. The software allows you to create the recovery DVDs containing Pro Win 7 64-bit system and the image that is activated.

• Portege R930: cannot use the keys FN under Win XP

  Hye

  I'm French. I'm sorry, but my English is not good. I'll try to explain my problem

  Yesterday, my boss gave me a new computer. It's a PT330E Portege R930-1FE with windows XP, 7 has been uninstalled

  I can't turn off my touchpad. I can't use the Fn key.

  I called technical support and after I downloaded the drivers for seven 32-bit and 64-bit... But I still have my problem

  Please, you have a solution.

  Thank you

  Hello

  Fn keys are controlled by special tools of Toshiba and depends on the running system.

  Using Win XP, you need to install the common Modules and this must be done first. The common modules is an essential component of Windows systems.
  He will perform the other original programming from TOSHIBA to work properly.

  Check this box:
  [Common Module Win XP v6.07.03 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 83752 & OSI D = 10 & driverLanguage = 42]

  To get the other buttons FN working (ie the screen switching output), you must install hotkey utilities for display devices
  [Utility Hotkey for display v1.0.2.5 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 83758 & OSI D = 10 & driverLanguage = 42]

  In order to disable the touchpad, you need to install Touch Pad on / off Utility
  [Touch Pad on / off Utility for Win XP v2.5.5.1 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct 7565 = & selSh ortMod = null & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 83770 & OSI D = 10 & driverLanguage = 42]

  I recommend you to check the page of the Toshiba UE driver and install all the available drivers for Win XP.

• How to get Nero to Win 7 on Portege R930 after the new clean install

  I have a new Portege r930.

  The Lalonde was formateed and install windows 7 x 64 enterprise as all systems within our Organization.
  Everything is ok, but is anyway download nero, which is included in the original installation, and install it after format?

  I created the recovery discs four system, but this app is not installable in any one of the four discs

  Thaks.

  > Everything is ok, but is anyway download nero, which is included in the original installation, and install it after format?

  Non-Toshiba tools and software that are part of the image of preinstalled Toshiba cannot be downloaded separately. You can use this software only as part of image of Toshiba.
  If you have installed your own system, you must purchase the software.

• Portege R930 gets hot enough

  My Portege R930 (PT331E - i7) becomes quite warm today, earlier it was very silent, now the fan is 70% most of the time.

  I open the bottom cover and checked the cooling paste on top of the processor - seemed rather dry.

  Should I change the dough? I cleaned the fan.
  What can I do else?

  Thank you
  / Anders

  Hello

  If you have already removed your laptop and cleaned vents and grid cooling cooling you can also change the FAT if you know how to do this. I mean, why not. Laptop is already open.

  Usually after the computer cooling system laptop cleaning should work a lot quieter. A few years ago I did this on my machine. I found so much dust inside which blocked the air flow.

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Portege R930-122 - Toshiba VAP REGDB get impossible point Win7 Pro 64-bit

  The toshiba Portege R930-122 as value added package reports during installation regDB get point is not.

  Start, change or remove SW procedure leads report.
  Toshiba Flash cards program is installed, but allowing on deactivation function keys is no difference (not driving function keys).

  Toshiba accessibility reports: this system cannot make use of Toshiba accessibility.

  Function keys worked until I upgraded to some Toshiba and Intel video driver packages, but can't find that one is the cause.

  You happen to know where to look?

  Hello

  Without the good work Toshiba PPV, other software Toshiba would not work properly.
  It is important to get the PPV of work package before you start the installation of other software from Toshiba!

  From my point of view of a few you should update the Win 7 in the last State before starting the installation of the software. The Win 7 SP1 must be installed before using the additional software.

  I found some installation instructions and the correct order:

  Windows 7 SP1 of Win7
  .NET framework 4.0 [TRO]
  SW 9.3.0.1020 Chipset installation utility
  Intel Management Engine Interface 8.00.03.1427
  Intel AMT 8.00.03.1427 software
  Driver Intel 8.15.10.2712
  Intelligent management of the screen TOSHIBA v1.0.3.0
  Driver Intel Rapid Storage Technology 11.0.0.1032
  Technology of quick start Software Intel 1.0.0.1022
  ALPS Pointing Device Driver v7.x6.303.214
  Synaptics Touch Pad Driver 15.3.27.1
  Realtek Audio Driver 6.0.1.6591
  SRS Premium Sound 3D 1.12.1800
  Driver Intel LAN 16.8.46
  Intel Wireless LAN Driver 15.1.0.21.1
  Intel Proset 15.1.0.0.2.s32
  Intel Wireless Display 3.0.13.0
  Bluetooth Monitor v4.08
  Battery Bluetooth for Windows by Toshiba v9.00.03T
  USB3.0 Driver 2.1.28.0
  Intel USB3.0 Driver 1.0.4.220
  Ericsson 3 G driver 7.1.0.3
  Ericsson Wireless Manager 7.1.0.2
  O2Micro smart card reader driver
  Ricoh 2.15.17.02 card reader
  Driver USB-Serial V1.3.0
  TOSHIBA value added package 1.6.0027.320202
  TOSHIBA Fingerprint Utility V2.0.0.9
  TOSHIBA Web Camera Application V2.0.3.33
  PatchFiles PCIIDEREG - 1.2
  PatchFiles TosVolRegulator_1.1
  PatchFiles TBMINITREG-1. 0 t

• Can CPU overheating if Portege R930 goes into sleep mode?

  I have an a Portege R930. I run an application of 25-30% of the CPU for long hours. If I put the laptop in mode 'sleep', the calculation get suspended? If not, and it is still running, how the CPU is cooled when the fan is off mode 'sleep'? The CPU can overheat?

  I * don't * want my program from several hours to be interrupted by a detector from overheating. If I know that the program is suspended in mode 'sleep', I fear enter "standby" mode. If this isn't the case, so I'll keep the laptop awake, and if I need to carry the laptop, I'll put it into hibernation.

  The answer seems to be that the CPU cannot fire because the programs are suspended: http://forums.toshiba.com/t5/Port%C3...p/689961#M4014

• Portege R930 - 14 X and additional software

  Hello

  I recently acquired a Toshiba Portege R930 - 14 X, a friend. It is running Windows Pro 8.1, it came with any disks etc. It does not seem to have any of the supplied software, he would come with out of the box. Please excuse that my ignorance, but is there anyway I can restore it or download it please.

  Thank you very much

  Hello

  According to the specifications of the laptop this model of laptop computer came with preinstalled WIN7 64 bit PRO & WIN8 64 bit PRO DVD.
  http://www.Toshiba.co.UK/discontinue...Tege-r930-14x/

  I don't know what version of the OS is installed now, I mean is it original with update or install own Win8.1 Win8 but all drivers necessary, tools and utilities, you can download from Toshiba support and download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  Additional software is included in the recovery image only.

  If you have any other questions please be free to ask.

• RAM in Portege R930 max

  If I understand the straight plug to the Portege R930 with i7 processor maximum RAM is 8 GB. Has anyone tested a larger memory to say 16 GB?

  / Anders

  What model do you have? At your Portege PT331E part number?

• Portege R930 - upgrade the mSATA SSD succssfull

  Just briefly, I wanted to report an SSD upgrade.

  When I got my Portege R930 (PT331E, i7) two years ago, I changed the HD to a PRO 840 Samsung SSD 512 GB (big improvement). Now, this SSD is too small (photos!) and I wanted to increase the capacity up to 1 TB.

  But instead of a new SATA, I decided to go for an mSATA + adapter SATA I felt an mSATA unit would be more "evolutionary" - next update of the laptop for me would be a Portege Z, who use mSATA.

  So I bought a Samsung 850 EVO 1 TB with a Delock adapter/converter mSATA SSD, made a clone of the Apricorn cable and the software switched the SSD and everything works fine (actually a little faster )! At first I tried to use the clone with software from Samsungs migration but this didn t work, maybe I didn t the right version.

  -Now I have a lager SSD that will live longer than my R930. Please note that I'm not an expert with computers - just a happy user Toshiba! Thanks for a good forum with my good ideas!

  Concerning
  / Anders

  So, I bought a Samsung SSD 850 EVO mSATA 1 TB whole with a converter/adapter Delock...
  .. .and everything works fine

  Good news Lao!
  Thanks a lot for the comments...

  I also upgraded my laptop with a 250 GB SSD drive and now I think of a larger SSD... I should consider your solution now...

• Portege R930 brightness increases when the shiny things are displayed

  I use a Portege R930 with the 2nd lowest brightness. I noticed that when something bright is displayed, the overall screen brightness adjusted upwards by about 5 tiny slices to speed increment of 1 / second.

  Increments of brightness are not nearly as pronounced as the steps in the brightness slider, but it's there. And very annoying.
  I can't find any mention of this 'feature' online. Is it possible to disable it?

  Hello

  I put t know if your laptop was equipped with the graphics card AMD but the problem, you take it all sounds a bit like a future provided by AMD GPU called: AMD vari-bright.
  Vari-bright save energy consumption by optimising contrast image on the internal LCD screen AMD computers.

  This feature can be used if the computer is running in battery mode, using the internal LCD only or PowerPlay settings under mode battery is set to maximize autonomy.

  The Vari-Bright feature can be turned on and off in CCC.

• Portege R930 - 1 d 0 + Replicator port dual monitor supported high speed II - taken

  Hello

  Crossing a Portege R930 - 1 d 0 high speed port replicatior II.
  Is it possible to dual-display output?

  Thank you

  You hear the internal + external display by the dual display or you mean two external monitors?
  Speed Hi II port replicator supports the RGB port and display port and HDMI port but (display port and HDMI) can not be used simultaneously.

  You can use the internal s for computer laptop HDMI port and for example a the Hi speed port replicator II ports to connect an external monitor.

• Why my partitioning process taking so long? (I've waited 1 day it ends)

  Why my partitioning process taking so long? (I've waited 1 day it ends). Please help me, your help is very appreciated.

  1. Please disconnect from external storage. You use a USB Installer?

  2 use wired network connection, if possible.

  3. What is the version of Windows that you are trying to install?

  4. what version of Mac OS X on your Mac?

• Portege R930 is compatible with Dynadock U3.0

  Hello

  I m using a Portege R930 with a ' Toshiba Hi Speed Port Replicator II.
  The dock works fine, most of the time, but I was wondering if R930 is also compatible with Toshiba dynadock U3.0 USB 3.0 Docking Station universal since I want to use the laptop monitor and 2 additional monitors(1920x1080).

  Best regards
  Adrian Dobre

  The Dynadock U3 is compatible with most computers and could be connected to a regular USB port.

  It supports separate chip graphic.

  It supports a HDMI and a DVI - I ports that can be used simultaneously.

  This support allows to use up to 3 monitors (2 external + 1 internal)