Portege Z10 stucks on blue screen - cannot open a session

My system has issues where I couldn't get in the restoration of the system as it was not appearing
so went to msconfig and I went to start advanced and chose to go into diagnostic mode and restart it now has just a blue screen.

I can move the mouse and there is no login box?

I tried reboot and pressing F8 but no luck.
Is there another workaround for this?

Help, please!

Turn on the computer, press and hold the "F12" key while the Toshiba logo appears.
An alternative you can press on and press "0" to access the recovery option.
Select "HDD Recovery" and confirm by selecting 'Yes' that you want to enter the system recovery.

More information:
http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

Tags: Toshiba

Similar Questions

  • BlackBerry Z10 stuck on blue screen

    My Z10 won't restart. It gets stuck on blue screen after trying to remove the battery. Have also tried long-pressing the power button with volume keys simultaneously.

    I had to use the BlackBerry link to reload the software. That reset the handset to factory default - I then did a software upgrade. Phone seems to work fine except it will reboot now and again... I give up!

  • stuck on blue screen readings updated message 28% completed

    Original title: stuck on blue screen

    computer my son stuck on bluescreen message readings updated 28% complete turned off and restarted without change, please help

    Thank you

    Hi Jo-anweir,

    You can read the following article and try the suggested steps:

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

    Hope this information is useful.

  • Cannot open a session

    I just start a new laptop and trying to get Outlook, Hotmail, I downloaded Live Essentials. In the context of that Skype has been installed. I already have it on my desk top so no not anything would be a problem.

    I am at the point of connection and when I used the same log-in under my desk, did not work. So clicked on password forgotten, changed. Tried to log in again, not good. Keeps asking for my Skype name. Have no idea what it is other than the login name or the name that appears at the top of the page on my desktop.

    No matter what I have / use, cannot open a session.

    Don't know what other information need. Give me an idea what to do.

    What exactly is the version of Skype installed on your laptop? In Skype goto help-> on Skype.

  • l had express outlook XP with Firefox. cannot open a session to get or receive emails any ideas?

    Outlook express forum

    l had express outlook XP with Firefox.  cannot open a session to get or receive emails any ideas?
    As far as I KNOW, Hotmail has failed on OE for quite awhile.
    http://support.Microsoft.com/kb/878462
     
    For the best advice, Hotmail should ask in this dedicated forum.
     
    Windows Live Solution Center Hotmail Forum
    http://windowslivehelp.com/forums.aspx?ProductID=1
  • administrator cannot open a session

    Administrator cannot open a session, each time I have enter password, returns, "THE service USER PROFILE SERVICE has no connection. User profile cannot be loaded. Help!

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    See you soon.

    Mick Murphy - Microsoft partner

  • My CC icon, I cannot open a session.

    My CC icon, I cannot open a session. Says "Log In to continue" I connect with my credentials and he said "You have been logged Out", so I have everything again. It's a turning circle. Anyone else having this problem?  My connection works fine online.

    HELP PLEASE!

    Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

    - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

    - and the "loopback" https://forums.adobe.com/thread/1504792

  • Installation of Windows 7 recovery disk stuck on blue screen

    Hello

    I have the computer hp pavilion dv6 laptop. I am recovering my system with the recovery discs, I created.

    But he remained afetr windows logo on a blue screen with the mouse pointer.

    and whenever I tried to install other media then its shows 0Xc00000f error.

    What to do please help me.

    Hello akshay_p,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your laptop is stuck in a blue screen, it generates an error message, and I'd love to help you!

    As you restore your system with your recovery discs, I recommend later in this document on HP System Recovery troubleshooting (Windows 7). This will help you successfully perform a recovery of the system on your system.

    For more help, I'll need to know:

    product and model number your laptop.
    The bit version of Windows 7 , you are trying to install on your computer.
    If your computer has completed all its important updates of Windows.
    If you have updated your drivers from HP the HP SupportWizard.
    If it is a current or recent problem.

    Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

    Concerning

  • Blue screen, cannot run Windows Update

    I was browsing Reddit when all of a sudden my laptop decided NOPE and closes everything down to make an update. It was 03:00 so I wasn't thinking straight and closed on the rise and went to bed. The next day, while in the class my phone showed me a blue screen with some writing for everything... long enough not to read what was then asked if I wanted to start in different security modes. I thought that this could be because I interrupted an update and I tried to run Windows Update, but it will still not open.   I can't access anything whatever, and I have a paper in four days... Help, please!

    We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

    WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
    You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
    If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
    To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
    The procedure:
    * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
    * Zip up the copy (compress)
    * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
    Link to find out how to download below.
    To ensure the minidumps are enabled:
    * Click Start, in the search box, type: sysdm.cpl, press ENTER.
    * On the Advanced tab, click Startup and recovery... Settings button.
    * Make sure that automatically restart is unchecked.
    * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
    * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and download the output as well.
    To run MSinfo32 please go to start > run > MSinfo32
    Go to 'file', 'save' and download the PDF is saved with the DMP
    System specs are extremely useful then please include everything you know.

    Blue screen view and that crashed are often wrong and should only be used in case of emergency...

    Troubleshooting of Windows/source here
    You can learn more about BSOD here
    You will learn how to test your memory ici 
    An effective question gets help more quick read how here
    Pilot auditor-stalking a GIS behave driver here

    Co-written by JMH3143
    Team Zigzag3143.com  
  • Portege Z30-A-1E1 - blue screen and reboot

    Hello

    I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

    I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
    In the event log windows that I can't find anything that clearly led to a cause.

    I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

    Anyone had a problem like this?
    Any suggestions for debugging?

    Thank you very much!

    Hello

    I don't have a complete solution, but perhaps a step on the way.
    I would say first to disable the auto restart when a blue screen appears.
    This way the error message will remain on the screen until the PC is turned off.

    Know how prevents automatic restarts here:
    http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

    Tom BR

  • Stuck on blue screen again.

    Skype for desktop PC 6.21 is stuck at the screen "signing in. It happened first a few days ago, after I uninstalled and reinstalled Skype. Then, it worked fine, until that earlier.

    My updates Windows Installer automatically. I use IE 11. I have downloaded and run the file "cleaning connection", did not help. I don't want to uninstall and reinstall Skype each time that it gets stuck. Help, please. Thank you.

    Given that Skype uses IE IE background do some interviews:

    Reset the Internet Explorer settings:
    http://support.Microsoft.com/kb/923737

    Clear IE temporary files:
    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-temporary-Internet-files

    Erase Windows temporary files would be wise as well:
    http://www.PCWorld.com/article/2143502/Windows-8-1-Update-Tip-clean-up-that-disk-space-now.html

    If the problem persists, restart in Mode safe mode with networking to see if it works correctly there.

  • Stuck on blue screen with Rainbow clouds, floating section did not help.

    As it is said.

    When I run Skype, it just goes straight to a blue screen with blue clouds and a rainbow green at the bottom. I get no login prompt. I followed various guides, such as the change of name login Login1, removal of connection, restart the computer, uninstall and then install Skype (which gets me an error code 2734, I think), uninstalled and installed Internet Explorer. I ran windows update and everything is up-to-date. I also followed the advice in the section floating, and even after using the command line (which was not in the Accessories folder, had to search for cmd to find) and reboot, "press this button" does not work.

    Skype worked fine on Sunday, and now it's broken. The only thing I've done in the meantime is run a repair tool for Windows Media Player as a game, I have installed required him to play in the music of the game.

    EDIT: I am using Windows 7.

    Is your Windows 32 bit or 64 bit?

    http://support.Microsoft.com/kb/827218

    What is the version of Internet Explorer installed on your computer?

    In Internet Explorer, go to help-> words of Internet Explorer.

  • PowerMac G5 stuck on blue screen when it starts up

    Hello everyone,

    I have a PowerMac G5 (1.8 Ghz, 1.25 GB RAM 10.5.8 Leopard)

    If I turn on the machine it starts normally with the apple logo and the spinning wheel

    but when you have completed it sticks on the blue screen that you see before the connection menu.

    I don't know what to do,

    I hope to hear soon.

    Greetings, Rick

    Hey, Rick, start with this & let us know the result please.

    If 10.7.0 or later...

    Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.

  • Windows 7 stuck on blue screen

    Windows 7 pro

    Start pc makes me blue screen

    F8 options makes me blue screen

    Recovery dell boot on USB makes me fancy blue screen with poorly seen face

    The next step is a new installation or a repair install. Since your software is pre-installed with your system, simply contact your computer manufacturer for own installation media.

    Kind regards!

  • Blue screen - cannot access windows

    I have a HP Pavilion dv6 notebook with an Intel i-72670QM @2. 20 MHz processor.  The version of the BIOS F.1B by seller Insydle. It is currently running Windows 7 (well it can run Windows 7).

    The following error occurs: Windows has shut down to prevent damage to your computer. Weather I run Safe Mode or network mode I get the following technical error on a blue screen:

    STOPx000000IE/OXFFFFFFFFC0000005, OXFFFFFA80092B2B2330, OX0000000000000000. OX000007FFFFFA1000)

    The primary hard disk Self Test I ran long and short. No problem. Memory test passed. I realize that this has been addressed many times but I don't know what would be my next step. I have to get this laptop to factory-installed? If so, I need to be walked through this process.

    Again, I apologize if this is redundant, but not so sure of me. Any help would be greatly appreciated. As it is now, the laptop is unable to serve.

    Thank you.

    You can access the BIOS settings by pressing the ESC key as soon as you turn on the laptop. You want to press the ESC key about 1 time per second.

    This will bring you in the Start Menu above where you should see the option to enter the BIOS by pressing F10

    Once there, you want to press F9 to restore default

    Click Yes to confirm

    Press F10 to save and exit

    Then click Yes to confirm

    If that doesn't work you should do a system restore through recovery Manager (F11 on the Start Menu to the top)

Maybe you are looking for