Portege Z30 - A - Ubuntu 14.04 - Sierra Wireless

Hello

Toshiba Portege Z30 - A
PT241E-01D00QPL

Windows 7 - there are interface "Sierra Wireless Mobile Broadband Network Adapter".

Ubuntu 14.04 - there is nothing of :-(
Only -.
Bus 002 Device 003: ID 1199:9063 Sierra Wireless, Inc. sudo modprobe usbserial vendor = 0 x 1199 product = 0 x 9063

What can I do?

Perelka

Hello

There seems to be a bug in Ubuntu.
See this bug report:

https://bugs.Launchpad.NET/Ubuntu/+source/modemmanager/+bug/1326954

Tom BR

Tags: Toshiba

Similar Questions

  • Portege Z30 - I am unable to send SMS

    I have a Portege Z30-A-13F. On the previous Portege, Ericcson device shipped, I used the Toshiba Wireless Manager and the SMS from Toshiba utility in access card for messages (SMS).

    Currently, with the integrated chip of Sierra, I am able to access the network, but there is no interface for SMS on the AirCardWatcher tool.

    The Wireless Manager does not work (I think it only works with Ericsson devices).
    Is it possible to use the SMS with this computer?

    Thank you very much

    AFAIK this is regardless if the laptop supports the Ericson or the Sierra 3 G module.

    The Toshiba Wireless Manager should work fine in two modules.

    Check this document... He explains how to set up and establish a 3G connection via the Manager preinstalled Toshiba wireless.
    http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  • Portege Z30 Module problem - A - 13 L 3 G

    I had a problem with a new Portege Z30 - A - 13 L.

    Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

    I also put the right apn in the profile.
    I had this problem with 2 different operators sim cards.

    Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
    The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

    Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
    Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

    After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

    After that I reinstalled again the image Windows 8.1 with the original recovery disks.
    I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

    Then I uninstalled and installed the driver manually again.
    He appears again as com device in Device Manager.

    So I think that the module has been a hardware failure. What do you think?

    > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
    > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

    On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
    This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
    Install it!

    Also 3G must be activated before you try to establish a 3 G connection.
    Please check if the 3G module has been activated correctly!

    Recommend checking this information page of Microsoft Mobile Broadband end-to-end
    http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

    You will find different troubleshooting tips.

    In the case where you have a signal but you can't connect the possible reasons could be:
    You don t have a valid data subscription.
    The name of the access point (APN), user name or password used for the connection is not valid.
    You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

  • Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

    Dear all,

    My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

    I can not hibernate through the following methods:
    1. click on 'Start', 'power', 'Hibernate '.
    2. press x and windows, click on 'Close or disconnect', click on 'standby '.
    3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

    Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

    Well want to can someone help?

    See you soon,.
    Bender22

    Dear all,

    There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

    I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

    Can anyone help, because Toshiba cannot.

    See you soon,.
    Bender22

  • Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

    I have a Portege Z30 PT311E-01P03GIT

    The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
    Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
    The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

    It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

    Other than that, all the features and video modes work.
    Any help to solve this problem?

    Thank you

    Below, the initialization of the kernel dmesg messages

    Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
    Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
    Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
    Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
    Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
    Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

    Hello

    You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

    fb = false

    Here is a non-Toshiba, not Debian related article describes some useful steps:

    http://KB.Digium.com/articles/FAQ/HO...using-problems

    I hope this helps.

    Tom BR

  • VPN with Sierre Wireless Module connection does not work in a constellation

    Hi, I use my laptop several times outside the office. If I have the ability to connect via WLAN or LAN, everything works fine.

    I use the Cisco VPN Client Version 5.0.07.0440, the built in Sierra Wireless Mobile Broadband Network Adapter Version 14.11.1050.69 driver.

    I'm liviing in Austria and I use the network 3 G/LTE auf "drei". I've been in contact with the customer of the "drei", they checked whether there are Port restrictions. If I put the SIM card in my smartphone and use my laptop via WIFI and a WLAN access point provided by my smartphone everything works fine. If I put the SIM card in my laptop Toshiba internet works very well, but I'am could not join my business network. The Cisco VPN Client is able to authenticate with the user name and password. The VPN connection is safe, but if I use ping to check if I can reach the server, I have 100% packet loss.

    Any ideas I can try to fix this?

    THX Daniel

    If I put the SIM card in my laptop Toshiba internet works fine, but not able to reach my company network I'am

    According to your statement, the laptop could be connected to the internet via 3 G networks.
    However, the VPN on the 3G network depends on the State of real network (coverage, signal strength, etc.).

    Here you will find a FAQ on this topic:
    http://APS2.toshiba-tro.de/KB0/FAQ8A02GN0000R01.htm

  • Portege Z30 - A - unable to connect to the GSM mobile network.

    Toshiba Portege Z30 - A Windows 7 Prof

    When I try to connect to a modem GSM receives the error:
    "Network connection based on a mobile broadband connection failed with the error code: 1.

    (GSM card works properly in other devices)

    Hello

    According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
    One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

    Recommend you to check the configuration.

  • Portege Z30 - B - 10 c: is THNSNJ256GMCU SSD supports hardware encryption

    I have a Toshiba Portege Z30 - B - 10 c with 256 GB SSD (exact model THNSNJ256GMCU).
    On the Internet I found weather mixed info, this drive takes in charge or no material encrytpion.

    Could someone help me find the answet to this question and, if it supports encryption.

    How to activate it?

    THNSNJ256GMCU

    Main features
    • Capacities up to 512 GB
    • Available in four Standard form factors
    • MLC NAND Flash memory
    • Low-power Devsleep feature support
    • The end-to-End data protection
    • Gravitational quadruple Code technology (reverse)

    More features
    • Translation mode which allows all disk configurations
    • Hot plug/OS-Aware removal
    Exclusive Toshiba • error correction technology, reverse (Quadruple gravitational Code Technology) support
    • Read only mode supported for emergency

    http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

  • Satellite vs Z30 Portege Z30

    From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

    * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
    * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
    * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

    My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

    Please be so kind and send feedback after your recovery image experience.

  • Portege Z30-C-12Z cam does not work with Win 10

    Hello!
    I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
    Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

    According to me, I tried and everything, checked it please help!

    Try this:
    Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
    I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

    If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

    Reinstall the camera application can also help.

  • Toshiba Portege Z30 - A - Accupoint does not work

    Hey there!

    I had a problem with the Accupoint, he moved alone, so I disabled it.
    But the problem is that I have also disabled the two buttons above the key.

    A is it possible to repair the Acupoint or disable without disabling the buttons?

    I have a Toshiba Portege Z30 - A with Windows 10

    Thank you!

    AccuPoint or Trackpoint

    I think it's a touchpad cable problem. Send in for repair.

  • Portege Z30 poster ipv4 and ipv6 - only pxe boot is

    Hi all

    Toshiba Portege Z30

    We do all our installs via PXE, when you press F12 I get now two network options where normally I would just get a.

    F12 gives the following options:

    HDD/SSD: SAMSUNG SSD SERIES
    LAN1: IPv6
    LAN2: IPv4

    When I select the option I get what follows read (IP addresses were not included, but are correctly pointing to the right servers):

    ------------------------------------------------------------------------
    > On IPv4 PXE boot.
    IP address of the station is *. ***. ***. ***
    IP address of the server is *. ***. ***. ***
    NBP filename is SMSBoot\x86\wdsnbp.com
    The NBP file size is 30832 bytes
    Download the NBP...

    Succeed to download the NBP file.

    Download the NBP...

    Succeed to download the NBP file.
    Press a key to continue...
    ------------------------------------------------------------------------

    I tried searching through the BIOS settings but can't find nothing obvious

    Can any advise if there is anything I can try to get this laptop to perform a PXE boot please

    Let me know if you need additional information

    Kind regards
    Steve

    Looks like your server isn't aware UEFI.
    Try changing the the CSM UEFI Boot Mode in the BIOS under the Advanced tab, under System Configuration. You may have to disable Secure Boot first.

  • Portege Z30 - smart card reader does not work

    Hi, I just got my new Portege Z30 a few days ago.
    I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
    When I insert the card as stated in the users manual, nothing happens.
    I have to player of SC "actuvate" somehow?

    (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

    Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

    Make sure that you use a compatible card and it is inserted correctly.

  • Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

    Hi all

    I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

    I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
    Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
    No mouse, no keyboard, and no USB key.

    When I start my Portege I must enter a password after you press the power button.
    These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

    If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

    I ran Windows 7 Enterprise on the Portege.
    BIOS version is 3.30

    Do you have a solution for me?

    Hello

    The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
    You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

    Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

    By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

    Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

  • BIOS of the computer 0xc004f063 Portege Z30-B-117 lack license required

    in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

    in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

Maybe you are looking for

  • Satellite Pro A60 - Windows XP shows / use only a part of RAM available

    Hello guys! I am facing strange problems with one of my two A60s. I just upgraded two of them with 1024 MB of RAM the same. One works perfectly, but the other will show me only 410 MBs in Windows. The BIOS indicates the correct size. I changed the RA

  • G530 causes intermittent network Drops for all Machines on the network

    I have a new G530 (Vista Home Premium, 3 GB of RAM) that will expose the weird behavior. Whenever he is on my home network, it causes all machines on the network to lose Internet connectivity for a few seconds every 30 seconds or more. Everything on

  • I'm changing my voicemail

    I'm changing my voicemail on my Iphone, I click the icon phone & voicemail, then I go to wishes, the default value and customization are light gray so when I click nothing happens, even when I click on Play or customize.  I see that the default value

  • Instant ink: ruined the last 4 digits of my instant ink trial code.

    Hello I bought a HP Envy 5530 printer that came with a free trial of two months of instant ink system. While scraping off the coast to reveal the code, I accidentally damaged the last 4 digits of the series of 16 digits. Is there a way I can get a re

  • How to reactivate xp pro sp 3 only 2 days to do

    I have Windows XP Pro SP3 for years and just changed a bad DVD/RW burner and added more ram. Now, I get the message saying that I need to activate windows because of too many changes on the hardware and only 2 days to do it. When I try to activate an