Portege Z30 - A - win 8.1 BT disconnection and pregnant BT power off

Similar Questions

• When using my computer, all applications and the windows are closed at the same time, got disconnected and the computer turns off as if someone stops manually.

  Original title: it's a virus that's causing this?

  It happened a few times now. While I use my computer, all applications and the windows are closed at the same time, I am disconnected and the computer is off, as if someone manually stops the computer. I turn on the computer and log in and everything seems to be okay. No data deleted, not that I could find and detect anyway. One day when I turned on the computer, it run chkdsk before doing the usual startup. I use the computer for 2 years and this is the first time, she never did a chkdsk on its own. I used Microsoft Essentials and no viruses were found.

  Should I worry?

  Hello

  You can read the following article and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Check if there are logs of events related to the issue in the event viewer which may help us to solve the problem of the:

  What are the information contained in the logs of the event (Event Viewer)?

• PIX failover: failover cable disconnected and active the unit off

  Hi all

  We have 2 PIX 515E 6.3 (3) in the failover configuration (not stateful failover). Basically, the failover works very well. Recently, we did some testing of failover and had the following situation:

  When we force the active PIX failover cable is disconnected, the rest-aid box inactive and has not changed in the active state.

  It is the 'normal' behavior or is there something wrong?

  Thank you for your response.

  Daniel Ruch

  Daniel,

  As mentioned previously, the behavior you report is expected. If the failover cable is removed from a pair of PIX failover during the race, each PIX will maintain it's State as active it or standby PIX. Remove the failover cable in effect, disables the failover of both units to avoid having two devices moving to an active state.

  Does make sense? I'm still confused what about * why * you test this though. Is this something you think that will happen in your environment?

  Scott

• Satellite vs Z30 Portege Z30

  From what I can tell (and confirmed to the Toshiba customer service) the Satellite Z30 is identical to the Portege Z30 except for the following differences:

  * The Portege Z30's Active Management Technology (AMT), which allows some administration remotely for enterprise environments
  * The Portege Z30 has a warranty of 3 years (1 year of the Satellite)
  * The Portege Z30 is pre-installed with Windows 7 and Windows 7 system restore partitions (and Windows media 8.1 provided) so that the Satellite comes pre-installed with Windows 8.1 system partitions and restore

  My question is if the roller on an image taken of installing Windows 7 from a Portege Z30 will transfer to Satellite Z30 machines? I suspect there will be no problems with the hardware, but I'm curious about Windows activation and if the SLP on Satellites key will match the Portege.

  Please be so kind and send feedback after your recovery image experience.

• Portege Z30-C-12Z cam does not work with Win 10

  Hello!
  I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
  Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

  According to me, I tried and everything, checked it please help!

  Try this:
  Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
  I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

  If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

  Reinstall the camera application can also help.

• Portege Z30-A-181 - win 10 graphics driver need - not strong enough screen

  Hello

  I would ask you for help. I've had my laptop PORTEGE Z30-A-181 PT243E 08305SCZ last November. I'm upgrading my OS to W10 64 bit and get into trouble with the DISPLAY DRIVER. It is not official for this PC display driver
  also, it's a laptop of high qualitity. I use W8/W7 64 bit drivers.
  Most of my screens is not sharp and smooth.
  Could you let me know, what to do?
  I was told that the laptop is not on the list of supported laptops.
  http://www.Toshiba.EU/innovation/generic/Windows10/
  It's a laptop 900pounds, hope, therefore, it is only poorly understand.

  Thank you.
  Kind regards
  M.Bitman

  I have not yet installed Windows 10, but the z30 - a should be on the list: https://www.toshiba.eu/innovation/ge...ws10-business/ (link to business-products)

• Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

  Hello

  I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
  However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

  The SSD 512 that I use is
  http://www.crucial.com/USA/en/storage-SSD-M550

  and according to the
  http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

  It is compatible with the Toshiba portege-z30-a-10w
  I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
  http://www.Toshiba.co.UK/innovation/...jsp?service=UK
  Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
  MU02 version
  http://www.crucial.com/USA/en/support-SSD
  However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

  All ideas

  Thank you
  David

  I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

  I have no why, but install Windows 8 seems to allow the 512 SSD to use

  Hope it will be useful.

  David

• Re: Portege Z30 - A - Bios update 3, 80-WIN using Win 7 64 bit

  Hello

  I have a Toshiba Portege Z30 - A
  Maybe someone was able to perform the bios upgrade in windows 7 64 bit?

  @tomek_1

  May I ask if you get an error message trying to update the BIOS?
  The downloaded BIOS package contains the exe to 3, 80 - WIN_ECB1.40.
  It is also a zipped folder. You can unzip the file using WinRAR or WinZip software.

  After that, you will get 16 files. I found the AutoExec file that seems to be the file that starts the BIOS update procedure.

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• BIOS of the computer 0xc004f063 Portege Z30-B-117 lack license required

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

  in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today, I discovered the information that is required to activate windows. The laptop has been pre-installed Win 7 Pro and media attached to Win 8 Pro. In notebook isn´t COA label. When you build the code and enter the Activator appears information - computer license lack required error 0xc004f063 bios. Microsoft, I was told that my product key is required to provide a computer manufacturer. Please help, I could turn on the system and work again. Thank you very much

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.

• Portege Z30-A-183 - data Erase finger finger

  Hello

  I have a Portege Z30-A-183.
  First of all, I used it with W7 and I recorded 3 fingers in the biometric fingerprint sensor.

  After that I updated to W8.1 but I have not deleted the scanned data of the fingers.

  W8.1 I haved comand to again record the data of my fingers, but the software says that it is not possible beacause in the memory of the sensor data of my fingers.

  I have haved read that these data are in a non-volatile memory on the sensor.

  How can I erase that data?

  Thank you

  Hello

  Yes fingerprint information is not saved on the hard drive (HDD) on your computer, but on some the chip.

  Usually the imprint must be removed using the utility of fingerprints, but if this does not work after the installation of the new operating system, I recommend you go back to the previous state before changing the system and use the fingerprint software which has been used for the registration of fingerprints.

  Details here:
  http://www.MyToshiba.com.au/support/items/FAQ/386

  But where the fingerprint would not work even using the version of Win 7, I think that this only Toshiba authorised service provider would be able to remove fingerprints already recorded.

• New Bios for Portege Z30 - has Changelog

  Hello
  If someone has tested the new bios (4.20 - WIN (ECB1.40)) for the Toshiba Portege Z30 - A or is it an official change log?
  Toshiba did not alter the fan behavior? The fan isn't fort/boring, but he could kick a little later.

  Concerning

  Someone has already installed the new bios?

• Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

  I have a Portege Z30 PT311E-01P03GIT

  The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
  Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
  The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

  It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

  Other than that, all the features and video modes work.
  Any help to solve this problem?

  Thank you

  Below, the initialization of the kernel dmesg messages

  Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
  Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
  Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
  Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
  Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
  Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

  Hello

  You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

  fb = false

  Here is a non-Toshiba, not Debian related article describes some useful steps:

  http://KB.Digium.com/articles/FAQ/HO...using-problems

  I hope this helps.

  Tom BR