Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

Similar Questions

• installation of windows 7 pro 64-bit will not complete installation. clean install.

  I tried to install windows 7 pro 64-bit and I got all the way to the last part of the installation and the screen goes black for 5 minutes approximately and restarts. then he tries to run windows and the screen becomes black and black rest for at least 30 mins +... is when I gave up on it. What can be wrong? I have overcome all the req and even tried 2 games of motherboard and processor and came to the same problem. I think it's a bad dvd but the store won't Exchange it. They let me just go back. then before I have to send back tomorrow I figured I would give it a try more.

  at this moment I have amd athlon 64 3800 + and 4 GB of ram and I also tried a quad core from amd phenom 2 and 6 GB of ram with the same result.

  Joe can you be more specific, what stage the installation goes on black screen...?

  I had a same problem once and there is a possible resolution to do so,
  If it is in the final phase of installation is mainly due to the video card..,.
  Then restart the computer and keep tapping F8, select "enable Mode low resolution" because the option and now the installation program will continue...
  see if it progresses and ends with the installation by inviting you to enter the user name and password then your product key.
  Once you have finished with these steps and that reach you your office update your video card driver and restart the computer.
  Hope it will work for you :D
  Please let us know if it works :)

• Windows 7 Ultimate Service Pack 1 (64-bit) will not download completely stuck at 95%

  I tried to install Service Pack 1 of Windows today on my laptop.  On one of my laptops with Windows 7 Home Premium 32 bit operating system Windows Update downloaded (with 4 other updates) in about an hour and installed successfully during the shut down and restart.

  However on my laptop main used with Windows 7 Ultimate 64-bit Service Pack 1 stops downloading (although he says he always download or seems to be) to 95%.  The first time that I tried to download with 3 other updates to Windows, and it stuck.  I finally stopped after about 7 hours with it stuck at 95%.  Isolated, the other downloads and downloaded and installed after the reboot and did it in less than 15 minutes.  Then began to try to download only the Service Pack 1.  It has now been underway for six hours and is still stuck on download of 95%.

  Another forum on the web had a message that the Service Pack 1 with Windows 7 Ultimate 64 bit will not download if you have installed language packs.  (Those who took me about 3-4 days to install and download due to make them one at a time because as a group they would get hung up.)  So I hope that I did not remove the language packs to get this Service Pack 1 installed on this machine.  I hope that Microsoft would have tested on a computer in Windows 7 Ultimate 64 bit with language packs installed but maybe not...

  
  

  I HAVE THE SAME PROBLEM. I GAVE TO MY VISTA NOW, I HAVE JUST AS MUCH TROUBLE I DID BEFORE.  ABSOLUTELY, NO DOWNLOAD FROM ANYWHERE.  I WOULD BE HAPPY TO RETURN TO XP.  DEE

  I feel for you Dolores it was extremely painful and tedious experience.  The final fix for my computer was going back to the origin by default with Windows Vista Home Premium on my computer.  Then load the software Windows 7 Ultimate.  Then the installation of updates about 100 + Windows which took place including Windows 7 SP 1.  All this has been done before loading another software (except Firefox and Chrome) on my computer.  I did it too before my security software loading, which – incidentally, roughly double the speed of downloads and other features of the computer.  Then after all the updates for Windows 7 has been done, I loaded with Microsoft Office Applications and its many updates.  After that I loaded my security software and checked for viruses.  Then rebuilt all the other features, software customization, etc. of this computer.  Literally, it took over a month to return to the same functionality that it had before the Windows 7 SP1 crashed the computer.  All I can say is thank God that I am religious about backing up files and folders, so I think I got about 95% of my files, folders, etc.

  Since the reconstruction, I didn't "major" problems with Windows 7, but I cringe when I update Windows 7 via their process of updating every Tuesday.  I also try to update not updates at the same time or too large sizes in the updates, even if it takes more time to do it this way.  I also reboot after each update whether necessary or not.  I run two registry cleaners different at least once a week, or even more often as since the failure of catostrophic SP 1 of the operating system.

  I will say this though, a lot of programs/software, I had that wouldn't work with Vista, all of a sudden work again with Windows 7.

  Good luck!

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• Vista Ultimate 64 bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Hi 1357ace,

  Take a look at the answer in thisthread by Michael Murphy. Michael both SpiritX provide good information to do a disk repair and troubleshooting more.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't download Windows updates or updates of Windows Defender, and my BITS will not start.

  Hi, I have a HP Pavilion dv4 Notebook PC, and I can't get my updates of windows to download anything. My BITS will not start.

  -Processor: Intel (r) Core (TM) 2 Duo CPU
  At 2.10 GHz, 2.10 GHz T6500
  -Memory (RAM): 4.00 GB
  -System type: 64-bit operating system
  -Windows Vista Home Premium Edition
  -Service Pack 2

  I have Webroot AntiVirus with Spy Sweeper and I recently downloaded the Malewarebytes Malware Anti.

  Whenever I try to download an update for anything, be it Itunes, Windows Defender, Windows updates, updates to HP or Microsoft Updates, they do not always arrive.

  When I go into the service menu & try to start BITS it comes up with this message:

  Windows cannot start the Service on the Local computer's Background Intelligent Transfer
  Error 126: The specified module is not found.

  When the updates of Windows fails to download updates, it comes up with the error Code: 80246008.

  I tried to download on microsoft.com BITS Repair tool, but it is said that the tool is not necessary.

  I really need someone to help me and to understand this point for me, it's happened now for about 3 months. When I bought the laptop I had Webroot AntiVirus with Spy Sweeper installed, and I just installed Malwarebytes' Anti Malware, a week ago.

  Anyway, do the following:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  5 test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Dell Pro 11 venue will not be upgraded

  My Dell Pro 11 place will not be upgraded Windows 10. It is said: ""Windows cannot be installed because this PC has a provision of disc not supported for UEFI firmware.". When I got my tablet, it upgraded to Windows 10 fine. However, I had to send the tablet in for repairs, and Dell reset the OS to 8. Now I can not upgrade to Windows 10 once again, receive the error initially. Please help me with this, I have already used up a lot of options and need 10 Windows to work. In addition, the free update of Windows 10 ends in 9 days.

  I was able to pass to the Win10. Obviously, reinstalled Dell Win8 use MBR partitions. On another PC, I had to create a Win8 USB installation, boot from that on my Tablet and delete all partitions. I then installed Win8 using a new partition in TPG. Once 8 has been reinstalled, I installed the driver for the wireless card from the Dell Web site, and then I upgraded to 10 without problem. Then I reinstalled the other drivers from Dell Web site, so that I could use the touch and other screen.

• I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  I have Lightroom on my iMac and MacBook Air, I just new MacBook Pro, all migrated to Pro air but will not work Lightroom until I have disable it on the Air.  HOW CAN I DO THIS?

  There is no such thing as disabling Lightroom 5.7. Just uninstall the software.

  Looks like you have installed 6 Lightroom on two of your computers (including the MacBook Air). In this case, you must find and launch Lightroom 6 (not Lightroom 5.7 or any other version of Lightroom 5) on the MacBook Air and then in the menu help, select logout.

• Premiere Pro 1.5 will not load

  Hello

  After a certain period of time "away" from the edition he thought time to get back in it.  However, my Premiere Pro 1.5 will not start on my computer.  (Normally), it gets to loading Wave_Warp AEX, stop, think about it for awhile, then the re-boot computer itself!  It works fine on my laptop and I tried on my desk of wives without any problem.  I tried everything I can think to stop this happening, including a full system restore with the disc format hard drive thinking HARD own would agree, but no, the same result.  I suspect there is a compatibility problem with this computer, which is a version of Win XP Media Hewlett Packard media machine running.  Any help or advice appreciated - I have spent a lot of time trying to get this to work and it's before I started to edit!

  PS I'm very much a 'home' user, and if don't want to go to load again upgrade, only to find that would have the same problem - I had an older version of the 'trial' of Pro 2.0, but that had the same result, the computer has re-boots during loading.

  Thank you very much

  MKN

  If specific to the front, this Article Adobe KB can be useful for you.

  Good luck and we hope this can help,

  Hunt

• Portege Z30-A-181 - win 10 graphics driver need - not strong enough screen

  Hello

  I would ask you for help. I've had my laptop PORTEGE Z30-A-181 PT243E 08305SCZ last November. I'm upgrading my OS to W10 64 bit and get into trouble with the DISPLAY DRIVER. It is not official for this PC display driver
  also, it's a laptop of high qualitity. I use W8/W7 64 bit drivers.
  Most of my screens is not sharp and smooth.
  Could you let me know, what to do?
  I was told that the laptop is not on the list of supported laptops.
  http://www.Toshiba.EU/innovation/generic/Windows10/
  It's a laptop 900pounds, hope, therefore, it is only poorly understand.

  Thank you.
  Kind regards
  M.Bitman

  I have not yet installed Windows 10, but the z30 - a should be on the list: https://www.toshiba.eu/innovation/ge...ws10-business/ (link to business-products)

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Windows 7 OEM Pro 32 Bit will provide drivers? Espescially LAN driver?

  If I install a recently purchased new Windows 7 Pro 32 Bit OEM, will I lose my drivers, especially my LAN driver.  After Windows 7 type of installed clean detail he worked drivers with digital signatures to Microsoft.  OEM provides the generic Microsoft drivers as the retail versions do?  I have more key for my retail copy.  I did the upgrade of Windows 10, he wiped my Windows 7, I did a clean install of Windows 7, but it will not activate without lost key.

  Hello

  If previous retail Windows 7 clean install provided drivers I needed, the OEM 7 would also provide them (for the same devices)?

  Not necessarily, because you may have been using Dell recovery media which has been customized by Dell and injected with drivers specific for your model Dell computer at the factory.

  Long version of the question below

  About network drivers for all three machines currently running Windows 7, but do not activate or allow changes (bad copy needed to recover from 10 Windows could not upgrade).

  1. I have a Dell Dimension E521, currently using

  According to the Dells, the latest drivers that they have is for Windows Vista, you can use.

  http://www.Dell.com/support/home/us/en/19/product-support/product/dimension-E521/drivers

  Its most likely the Windows 7 installation media will have the class drivers appropriate for at least your Broadcom, which you can use to connect to the Internet and update via Windows Update.

  Still download important factors in advance to have at least a working system:

  Which architecture of Windows 7 are install you, 32 bit or 64 bit?

  Broadcom 440 x 10 100 embedded controller v4.60.0.1 (bcm4sbxp.sys) digitally signed by Microsoft, I think that the previous clean install of Windows 7 at retail.

  http://downloads.Dell.com/Network/R150593.exe

  1.a. I copied from my Dell Windows 7 PC existing (bcm4sbxp.sys) to my network.

  1.b.  Dell offers no support for this model using Windows 7.

  1.c. downloaded from Broadcom 4401 for XP Vista & as: bcm4sbxp.sys, b44win.inf, b44win.cat; that seems to be what I use for Windows 7, but these files are not executable (s) then how would a re-install?

  2 gateway 9310 S (Marvell 88E8050 PCI-E ASF Gigabit Ethernet Controller Yuknon {which seems to be signed by Microsoft of the previous clean install of windows 7})

  2.a. Bridge existing as yk62x86.dll & yk62x86.sys PC

  2.b.  Downloaded from Marvell under Win7 Server 2008-R2 32-bit - 11.45.4.3.zip.

  2.c. Zip includes; yk62x86.sys, yk62x86.inf, yk62x86.cat; that seems to be what I currently have for Windows 7, but none of the files are executable, so, how would I install the driver?

  (3 acer Aspire M5100 (Marvell Yukon 8858056 PCI-E Gigabit Ethernet {which seems to be signed by Microsoft of the previous clean install of windows 7}))

  3.a. On Acer PC existing as yk62x86.dll & yk62x86.sys (same as walkway above)

  1. downloaded from Marvell under Win7 Server 2008-R2 32-bit - 11.45.4.3.zip.

  Even download accurate to Marvell for Acer and Gateway

  If it's too hard, no problem, appreciate the help so far.

• If win 7 64 bit will not support Firefox 10 why offer it

  I just read that you will not support 64 bit win 7 o/s so why am I being offered twice now to be honest.
  you are right this M/C is 32-bit but not my other is 64-bit

  Firefox every night, it is not in the channel (channel: this is the standard version where the majority of users, including you are.) It is fully tested and stable).

  Nightly channel: is the most unstable and buggy. This is where all tests are performed.

  If you can not see it in your update options.

  Thanks again

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.