Portege Z30-C-12Z cam does not work with Win 10

Hello!
I have a problem with my Portege Z30-C-12Z. Camera in win10 does not work.
Error code: 0xA00F4273. Have tried all the following steps: http://answers.microsoft.com/en-us/w...0-71c220c123a9 and like many more check the BIOS etc.

According to me, I tried and everything, checked it please help!

Try this:
Type of storage in the search window and go to the storage system settings page. Make sure that the economy sites point to existing folders.
I moved the files on a SD card and the camera could not find the folder of photos. Also, I've seen the suggestion to check that the folder of photos contains the security settings to allow access.

If still no good, remove the driver of the webcam from the Control Panel, then let Windows Update to install a driver for the webcam update.

Reinstall the camera application can also help.

Tags: Toshiba

Similar Questions

  • Portege Z30-A-189: microphone does not work with the connected headphones

    Hello
    I have a Portege z30-a-189 ultrabook.
    Today, I wanted to use Skype with a headset for the first time and I noticed that when the headphones are connected, the internal microphone does not work.
    When I connect headphones that have the microphone, it works, but I want to use headphones that do not have microphone.
    I chcecked all in windows 10 sound settings.

    If you come on a site back, you will find the solution. (see my last post - realtek settings)
    https://Forum.Toshiba.EU/showthread...-in-headphones

  • Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

    Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

    There are Windows 7 drivers here...

    http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

    Have you tried?

    Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

  • My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

    My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

    Visit the HP website and look.

  • Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

    Hey guys

    just got my companion to upgrade me for win 7 64 bit.
    Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

    "driver open webcam fail. Please restart camera or computer.

    See you soon

    Hello

    Seems that you used the wrong webcam software/driver or is not compatible
    You must use a webcam Chicony Win 7 64 bit software.

    > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
    The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
    You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

    Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

    Welcome them

  • Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

    I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
    I checked the drivers and they work, I have 10 Diretcx and it works.

    When I open the camera program, it works well.
    I put the camera program is not at initial start-up of laptop.
    I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

    Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    Hello

    > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
    You should check if the webcam has been chosen correctly in Skype video settings.

    If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

  • Portege R500 - TrueSuite Access manager does not work with IE 8

    TrueSuite Access Manager does not work with Internet Explorer 8

    Version:
    Internet Explorer: 8.0.6001.18702
    TrueSuite Access Manager 2.1.23.0

    Any idea?

    Thankx
    Robert

    Hello!

    Which laptop computer and operating system you have?
    And what do you mean with it doesn t work? You get an error message or something else?

    You must give us a little more information. Otherwise, we can t help you my friend.

    Good bye

  • Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

    Hello

    I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
    The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
    The webcam works fine with the Camera Assistant Software.

    I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
    None of the above works.
    Any suggestion received with joy...
    Thomas

    You can try to install the CAM such as ManyCams software - http://www.manycam.com/
    Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

    Richard S.

  • DeskJet 712c does not work with Win 7

    I recently switched to a new win 7 Home Premium SP1 (64) my old XP computer which worked well with my printer.  The printer does not work with the new OS and the computer.  Even if the computer indicates that the device is functioning normally, the printer will not accept print orders.  Not even the printer print test.  There is no error reports but the system behaves as if the usb is not connected, even though it is.   There were no changes in connectivity before or after installing new software (or trying) trying to get the new computer set up.

    I just found it and tried the wizard of the printer which also implies that the usb is not connected even though it is.

    The compatibility options have done nothing to help.

    Tara,.

    EUREKA!  At the risk of party too early, it seems that I am able to print with my new computer (HP).  Fixed after almost endless hours trying to get my printer to work despite many internet messages saying it could not be done and other giving solutions that didn't work.

    Why o ' why the solution apparently a hidden secret and why the tools did not work?

    In any case, thank you very much.  With all the problems I'm having to migrate to Windows 7, it's a very important achievement.  Thank you, thank you.

    Chuck

  • I have a HP 3970 scanner that does not work with Win 7.

    My new computer came with win 7 is installed.  I have a HP 3970 flatbed scanner

    It will not work with win 7.  Before that I had win xp and the scanner worked fine.

    How can I solve this problem?

    Hello

    It probably won't work because they don't have windows 7 drivers written for her by HP

    HP has written drivers for their products non-microsoft

    read the information about the available drivers below

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=298549&TaskID=135&prodTypeId=15179&prodSeriesId=298547&submit.y=1&submit.x=6&lang=en&cc=us

    You can try the vista drivers or contact HP or buy a new scanner

  • Wireless camera does not work with the new router

    Hello, I'm having a problem with a camera D-Link DCS932L after you set up the EA4500.  The manual of the camera can be found here.

    http://d2okd4tdjucp2n.CloudFront.NET/DCs-932L_A1_Manual_v1.00 (NA) - en.PDF

    It worked fine with my old D-Link router.  The rest of the House has not had a problem with the EA4500.  There is a level of criticality around this camera certail and if I can't make it work, I'll have to return the router.  Configure the redirection of port as 5556 ~ 5559, TCP protocol (but I tried "Both" as well"with the IP address of the camera.  It still does not work.

    I craft but not in networks, i.e. I'm not stupid with tech but port quarrels is out of my comfort zone.  This camera with our old router setup took minutes.  I spent five hours trying to make it work on the EA4500.

    I guess you have the static IP value, or having a reserve of DHCP MAC address for the camera, network OK settings.

    What was the authentication wireless on the old router and that you use the new 4200?

    Is it possible that the camera does not support the encryption used by the 4200, i.e. wpa2-personal?

    Have you tried WEP to see if the unit works then?

  • Portege R700 - 172 Portable Firefox does not work with Win7 x 64

    Hello
    did someone use successfully the portable firefox on this machine? It does not work on my machine. I guess it does not support Windows 7 x 64?

    Hello

    AFAIK the portable firefox is designed for mobile use.
    Means that you can place it on the USB flash key, and there is no need to be installed on the operating system.
    Therefore, I doubt that the Win 7 64 bit operating system is the reason why it s not working do not.

    The portable firefox is based on the official version of the common Firefox browser and is compatible with Win 2000, Win XP, Windows Vista, Windows 7.

    In your case, I would ask in the forums of Firefox for details.
    But it would be interesting to know what could cause this part please so the news with us if you will get more details

  • Portege R500 - Nokia PC suite does not work with Bluetooth

    Hello

    Toshiba bluetooth + nokia pc suite works DO NOT!

    I have problem with Portege R500. Toshiba Bluetooth stack 6.40 (from the download page) is not compatible with the new Nokia PC suite 7.1.
    PC Suite only works with Toshiba Bluetooth stack, driver version 5.10.12. PC Suite indicates that bluetooth can not be found.

    * See the system requirements for PC suite

    http://Europe.Nokia.com/get-support-and-software/download-software/Nokia-Ovi-Suite/system-requirements

    Where can this 5.10.12 version be downloaded for 64-bit operating system? I just need for the trial which would even work.

    Help, please!

    Hello

    I'm not very well if you want to get an older version of battery BT m.
    On this Toshiba Bluetooth portal, you can get the new version 6.40.00 BT
    http://APS2.toshiba-tro.de/Bluetooth/

    But I don t understand why it should not work with c. 6.40
    I think that Nokia system requirements were created before the release of version 6.40...

    However, if newest PC suite 7.1 is not compatible with the BT 6.4 then I recommend that you test the battery Microsoft Bluetooth...

  • Qosmio F60 - 14Q - FN key does not work with Win 8.1

    Hello

    FN key does not work when I press the FN + F1 keys... F12 after installation win 8.1 instead of win7 which originated with my camera.
    is it possible to make it work even once with 8.1 win and if I need your instructions.

    Can you please tell us what model of laptop do you have?
    Your machine is supported for the own Win8.1 version? Did you check that?

  • Satellite P105 carpet * a dvd player does not work with Win 7

    Greetings,

    I need an upgrade on my dvd to my vintage Satellite P105.
    I want the possible fastest dvd burner right now because I'm a fan of film and keep them in digital memory.

    (1) first should I get an external drive or can I get the best performance with an internal dvd replacement of a reseller of parts or Toshiba?

    The problem is when I've upgraded to windows 7 things have changed. I lost my sound, but that solved using a driver inherited Visa as apparently the sound 'Council' on the laptop is for Vista only. Then I found the dvd player which is a mitsu * an internal UJ-450 does not or is extremely slow in saving films, records or files. The available recording software seems also planned for Vista performance was acceptable. Even the dvd burning software does not work.

    (2) so my question for multimedia specialists is: what should be my next move?

    (3) should I go outside and confront the neck of the bottle USB or

    (4) to make the speed of the bus on the internal dvd?

    (5) given an internal dvd is preferable, because it's exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.

    (6) most importantly, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?

    Of course, if you could give me a model number and direct me to the sales it would be much appreciated.

    Thank you in advance.

    Rachel_1

    > 1) first of all I should go for an external drive or can I get optimal performance with a dvd replacement internal to a coin dealer or Toshiba?

    You should know that not all internal STRANGE machines are compatible. You will need to use a not compatible and supported and such device could be ordered in a local ASP.
    But it s more expensive as an external CD/DVD device so you could also choose an external that would be compatible with all computers and laptops available.

    (> 2) so, my question for multimedia specialists is: what should be my next move?
    As mentioned. Good option would be to buy an external burner drive ODD

    (> 3) should I go outside and confront the neck of the bottle USB or
    External device are compatible with all computers and are less expensive

    (> 4) go to the speed of the bus on the internal dvd?
    If you have the money for an internal device and want to use it with P105 only then you can also choose an internal burner.

    (> 5) because a dvd internal is preferable, because it is exactly a dvd-ram/IDE as it is currently, or some other configuration of bus.
    As far as I know it s an IDE interface, but the device would support setting master or slave or c - salt. As mentioned, you can buy a Toshiba a recommended.

    (> 6) especially, what dvd burner would give me 18 x speed with current programs like ConvertXtoDVD and did as a symbol external or - better - as an internal dvd replacement or my slow drive currently?
    Point 5 of the air)

Maybe you are looking for