Portege Z30 / driver Audio Replicator + Touchpad scroll problems

Similar Questions

• Portege R100: Fn keys and Touchpad (Scroll) no longer works?

  Hello

  The Fn keys and touchpad scrolling don't work anymore. Everything was working fine yesterday and I did not install anything since then.

  When I try to open the "Accessibility" utility miladi, I get the following error: this system can not use "TOSHIBA INTERDISE".

  Any advice would be really appreciated.

  I hope that this can be corrected easily.

  Best regards
  Marc

  Hello

  I know that Toshiba accessibility!
  This tool is also pre-installed on my Satellite.
  I recommend reinstall the shortcut key utilities and the common modules.

  Did you mean that the touchpad doesn't work as it should be disabled?
  FN + F9 disable the touchpad. Maybe you have turned it off accidentally?

  If not, I would first check the touchpad configuration and if it doesn't help then I would try reinstalling the driver for the touchpad.

• Touchpad scroll problem (N500 5 MG)

  I have a Lenovo N500 5 MG and I have a problem with my touchpad

  I downloaded the driver will for him and installed successfully. everything is OK but the vertical scrolling does not work

  How can I solve this problem?

  This model has a horizontal scrolling?

  can someone help me?

  (Sorry my English is very bad)

  You have to activate the scroll at the discretion of touchpad function?

  If this isn't the case, you can go to mouse properties or the bar system toucpad.
  Select the gesture, and check "use the scroll function.

• DRIVER AUDIO HP Compaq DC7800 PROBLEM!

  I installed windows xp home edition for HP compaq DC 7800 (cool). Then I went to the HP website to download all the drivers for it.

  I can not install audio driver, he repeats to me "HDA Audio bus driver is required and not found".

  Other drivers work well. (graphic,...)

  I don't know if my PC has audio or not! Cannot find any audio hardware on the Device Manager and in dxdiag.

  When I checked in the Device Manager, I found tese details,

  PCI\VEN_8086 & DEV_293E & SUBSYS_2818103C & REV_02\3 & B1BFB68 & 0 & D8

  This PC has speakers and the takeover, micro and haedphone for sound, I guess the audio equipment must be installed, but I can't.

  I really appreciate any help.

  Hello

  Do not worry. I found the solution.

  I think that microsoft forgot to update driver HD Audio in Windows XP 2002 SP3 Home edition.

  However I found the solution.

  See the following steps to change Windows SP3 to SP2, to reboot your system and install your driver. Windows accepts as window thinking "It's SP2 Windows".

  Run regedit/HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Windows/CSD Version.

  Here, value of chang version CSD from 300 to 200 & reboot.

  Check that your system will be SP2.

  Enjoy it!

  Spoiler (Highlight to read)

   

• Portege Z30-A-12N - touchpad info/Tech doc. required

  Hello everyone,

  I would like to get technical information as much as possible on (my) laptop Portege Z30-A-12N computer touchpad.
  I am a Linux developer and I would like to add the support of the ALPS touchpad at the core, however, it seems
  quite difficult to get hold of all documentation Tech.

  So far, the only things I know is that the touchpad signals to kernel (via the E7 and EC PS/2 commands) so:
  E7 = 03 73 0 a., EC = b3 88 22

  In particular, I need to know the model of the device, the ALPS PS/2 used and as much on Protocol version
  the features of the device as possible.

  Does anyone have more information?
  Or you could point me to?
  Any help much appreciated.

  Details on my laptop:
  Toshiba Portege Z30-A-N12
  S/N: YD111643H

  Thank you

  vencik

  Buddy, I'm afraid that's not m put these questions.
  First of all the touchpad isn't designed by Toshiba but 3rd party manufacturer: I guess its Synaptics or Alps.
  In my opinion you should consult touchpad manufacturer/supplier for information

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Portege Z30 - customize touchpad

  I like some Toshiba Z30 touchpad options, like the 2 fingers to scroll, including in web browsers.

  However, I hate the back of the browser (it seems to me that it is controlled by the upper part of the touchpad).

  It always changes accidentally back and forth while browsing Web pages.
  Can I unable that work without disables 2 fingers to scroll?

  If I uncheck 'browser user support functions' in finger scrolling properties then 2 advanced mice also stops working.

  Thank you

  Hello

  It seems that the Portege Z30 would support the Alps Electric touchpad driver.

  As you have probably not known touchpad modules are used in different Toshiba laptops; like touchpad Synaptics, Alps or momentum.

  Mentioned modules are supported on different features so possible that the Alps touchpad would not support the same features of touchpad touchpad Synaptics or momentum module.

  Anyway, the fact is that you can find all the functions of the touchpad supported:

  Control Panel-> mouse-> last tab (device settings)-> the settings button.

  Here, you should be able to get all the touchpad option that could be modified and changed.

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Portege Z30 PT24AE - Touchpad freeze intermittently

  I have a book ultra z30 Portege (Windows 7 Pro) and a few weeks ago began to notice that the touchpad would freeze all of a sudden. All other functions work; That is to say by typing on the keyboard could perform an operation expected or right click would open pop a list of respect. However, I wouldn't be able to move the cursor was frozen.

  I tried the Fn + F5 key or CTRL key. + F5 and all other combinations, I can find online.
  The only thing that seems to work is me close the cover and opening it (available online as well) and then I have to log in again to continue my work.

  Any thoughts on what is happening here... All the drivers are updated.

  Thanks in advance

  A
  NB:-the part number is PT24AE-00S01UEN

  I think it's a touchpad cable problem. Send in for repair.

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• Portege M200: Can't find the right driver for the TouchPad

  Hello

  I have a problem with my Portege M200.

  Can't find the right driver for the TouchPad or a pencil,
  I read that it must be a Wacom Touchpad, but no driver I've tried has worked.

  I hope someone can give me a list of all the drivers that I need to use my pen on the screen!

  Thanks in advance.

  Chris

  Hello

  All the drivers are located on the European driver Toshiba page.
  Please check again.

  The touchpad needs an Alps Electric touchpad driver. It s is available on the page.
  In addition, you should the Tablet Pack (on the page too)
  This tablet PackMicrosoft Pack Microsoft Office XP for Tablet PC (Tablet Pack) allows you to write directly with your stylus in the documents of Office XP on your Tablet PC.

  By the way; You must use the pencil that was equipped with the Portege M200

  Welcome them

• Portege Z30-A-181 - win 10 graphics driver need - not strong enough screen

  Hello

  I would ask you for help. I've had my laptop PORTEGE Z30-A-181 PT243E 08305SCZ last November. I'm upgrading my OS to W10 64 bit and get into trouble with the DISPLAY DRIVER. It is not official for this PC display driver
  also, it's a laptop of high qualitity. I use W8/W7 64 bit drivers.
  Most of my screens is not sharp and smooth.
  Could you let me know, what to do?
  I was told that the laptop is not on the list of supported laptops.
  http://www.Toshiba.EU/innovation/generic/Windows10/
  It's a laptop 900pounds, hope, therefore, it is only poorly understand.

  Thank you.
  Kind regards
  M.Bitman

  I have not yet installed Windows 10, but the z30 - a should be on the list: https://www.toshiba.eu/innovation/ge...ws10-business/ (link to business-products)

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Driver/Touchpad Scroller

  Greetings,

  Model: HP Pavallion DV4 1319TU.

  No. VB644PA #ACJ.

  Operating system: Windows 7 Home Premium 32 - Bit

  I have format my laptop yesterday due to technical difficulties.

  Now I have been formatted. Earlier, my touchpad scroller mouse was working properly.

  But after formatting the laptop, my mouse touchpad scrolling is not working now.

  also I am not able to determine if it should be installed any driver.

  Please help me.

  Thank you very much in advance for the help.

  Concerning

  You are the very welcome.

  Sorry...

  Your model uses the Alps touchpad driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-77000-1&cc=us&DLC=en&LC=en&OS=4062&product=3962757&sw_lang=

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.