Portege Z30T-a does not start

Similar Questions

• Portege 3490, Windows does not start no-how to reinstall?

  Hello
  I bought a laptop portege flea market in US a few months ago. It was quite a good deal, but unfortunately it came without floppy and cd drives, only with the external network adapter.

  The problem is that now, Windows XP does not start upward due to some mess that I did with Acronis partition software-dos prompt just says:

  From Acronis Loader...

  The Acronis loader: no current configuration file.
  Press to restart...

  I guess that it is not really a problem if I had a floppy or cd drive. Although I would rather buy one just for unique operating system installation. (normally I use lan connection to transfer files between my computer).

  In any case, I would be very happy if you could tell me how boot/install OS using the LAN network connection (how to turn on my desktop pc into a CD drive on the server and dhcp on the network sharing, etc.). I tried to search the Internet to do this, but it is surprisingly bad comments on this topic, and toshiba so do not write on this subject in the manual...

  Best regards
  Aldous

  Hello

  Well, I think that somewhere, there should be information that it supports booting from LAN (PXE). But since this reqiures some heave stuff behind the LAN, it might be a little difficult to tell the whole story in the manual.

  Anyway, the way I am familiar with this is that you can start the machine from the LAN (or rather install the machine of the LAN) If you have an available RIS (Remote Installation Server). This isn't something that people generally have in their homes. What it takes is a Win2000 / XP or Win2003 server with active DHCP server. You will also need to prepare a special 'image' of the installation media (but there is a guide to help you with this in Win2000 server at least).
  After that, it should be fairly simple. Starting the machine of the LAN, get an IP address and by accepting to download the bootstrap of the server, login and then it really looks as if you dΘmarrez from a Windows Media.
  So in short - use it to Win2000/XP/2003 server and support for Windows of choice. Some LAN cables and possibly a switch/hub.

  If you can get your hands on a PC Card (16-bit)! CD Rom and can make a CD bootable, then that could be easier.

  Theoretical, you can also move your HARD drive to another PC and it is
  -install Windows on it

  or

  make 2 partitions and copy Windows Media to the second to the first bootable with f.ex. BACK/Win9X, bring it and install Windows on the first partition when the disc is in the 3490.

  But these 2 varaints gives 2 potential problms as they are complicated to solve:

  If you only install BACK/Win9X on the HARD drive you will get probably the problems to start the HARD drive when you put it in the 3490.

  If you install windows on the HARD disk, you may both get HARD drive boot problems and also get windows to load correctly due to differences in the chipsets.

  Sorry for a lot of words :)

  Good luck!

  Tom

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Portege Z930-118 does not start after the BIOS update

  My PORTEGE Z930-118 failover and wont start after I upgrade in the middle of the upgrade I remove power, then press stop down after I see the power and wireless but the screen stays black?

  Any help please

  In this case the EPROM has to be reflashed once more using crisis disk BIOS.
  Usually this must be done by authorized maker Toshiba. But of course this will be possible only if the EPROM module has not been too bad.

  What to say: try procedure (link above) posted by Bob. In which case it will not work, ASP is your next contact point.

  Good luck

• New hard drive installed on Portege M200 but does not start

  I upgraded the hard drive in my Portege M200 from 4 GB to 80 GB using Parted Magic to clone the original disc. Cloning complete successfully, but instead of starting with the new drive, the M200 simply display a blinking cursor when turned on. Any help is very appreciated.

  TIA, update

  Hello

  Maybe you can try one of the below to solve your problem:

  BUT! ALWAYS keep a backup!

  Boot the system with a flexible BACK (with fdisk.exe inside) to restore the MBR by typing

  FDISK/MBR

  This works even on a SATA drive. Start alternative all Win2k or XP installation CD, go to the console command and issure of recovery

  FIXMBR

  See you soon

  Tom

• Portege M600 is does not start

  Hi, I have a PC laptop Toshiba Portege M600.
  Yesterday, it happened all of a sudden my Media Player got suspended and so I pressed the power button to turn off the service and then try to restart it. When trying to restart, its display Windows XP screen continuously without going forward to the Login window.

  I tried last good Configuration also known from the Safe Mode, Mode safe mode with networking. But in none of the options, it worked.

  Please help me to start my laptop.

  Have you tried to boot from the recovery CD and reinstall the OS again?
  I think that this should be checked permanently.

• Portege R100 does not start

  Can someone help me please. My Portege R100 does not start, when I turn the following text appears: in touch with tomorrow toshiba. After a few seconds a black screen with a blinking cursor on the left side of the screen.

  Thank you very much

  Hi Rehana,

  The Toshiba screen you will see first is the initial start screen is displayed while loading the BIOS. Once the BIOS has completed its process of loading, the system tries to boot the operating system and it is at this point that you have found the black screen with the blinking cursor in the upper left.

  Unfortunately, this indicates usually that the laptop can not load the operating system from the hard drive, or because the hard disk itself has not the contents have been damaged somehow.

  You might try to charge your laptop in 'safe' mode (press F8 during the initial loading of the BIOS) or you can try to boot your laptop from a bootable CD/DVD and hard drive.

  Finally, you can try to re - install your OS from the recovery CD.

  Kind regards

• Portege M800 - noise and HWSetup does not start

  Hello

  I use a Portege M800-116 under XP - SP3.

  Problem 1:
  Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
  As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

  Problem 2:
  Files WAV or MP3 recording with internal or external microphone produce mediocre results.
  The resulting files include a high level of high frequency noise and hum static.
  Connect the power supply increases the problem.

  Comparing the quality of the recording and playback with my old confidence Portege M100:
  My M800 is one not only of poor quality - it's plain unusable.

  Problem 3:
  Toshiba HWSetup does not start from the control panel.
  Have you tried the ONU - and re - installing nothing helps.

  Thank you for guiding me towards a solution.

  Concerning
  T

  Hi, fly,

  I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

  You have 3-pin or 2-pin AC/DC adapter?
  As far as I know in this case you need 3-pin AC/DC adapter and power cord.

  You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• Portege R100 laptop computer does not start after a while without food

  Hello

  Well there is some time, I bought a beautiful used R100 - a laptop Toshiba in passing - but now, she has developed an annoying problem. Whenever it disconnect the laptop from the power supply for more than 2 hours about (don't know if this is not longer) I can't begin the R100, even if the battery indicator is green. After pressing the powerbutton the power led lights in green, and nothing happens. The "solution" to this problem is to give the R100 some time in this 'turned on' - State and after 15 minutes, I am able to start the computer (turn market again).

  I think that this could be a problem with a battery on the motherboard that is at its limits and needs time to gather enough power to start the computer.

  I hope you can help me identify the problem with my beloved laptop :)

  Yours,

  Tobias

  p.s. I have more or less need to identify the problem and some tips how to solve - the pleasure with the surgery will be from me :)

  p.p.s. Unlike the problem of the M400 further down, I've won if the beginning focused on the hard disk to Flash. In my case the R100 does not give a glance if it does not start. - And as a reference to the other post: "Hmm, I don't remember of the R100 fan not have it at all" * huggs its r100 * "."
  And I tried unplugging all the bits of the laptop and removed the battery, waited 15 minutes and tried to turn it on. the only way to obtain the departure of r100 is the method described above.

  You have an additional RAM installed?

  Maybe you need to re-seat, or it has a intermittent or heat associated with problem.

• My new Portege Z30-B-110 does not start

  My Z30-B-110 does not start. The keyboard and the screen will Flash regularly. I tried in vain to press the power button for a while. I would be grateful if you could help me.
  Thank you!

  Tona.

  Hello

  What do you with the keyboard and the screen flashes regularly?
  What happen exactly when you try to start your laptop?

  Have you done something that may be responsible for this problem? Update BIOS or any other installation of the update?

• Portege 2010 does not start-> white screen

  Hello

  I need help because my 2010 does not start. When I press the power button, the power light turns on but I get nothing on the screen.

  He worked when my brother used it until the mouse has frozen and then turns off. He then lit it back in which case only the power led came up with nothing on the screen.

  The hard drive was clicking while it worked so I don't have a gut feeling that hard must the disc are dead and causing the cell not to return as when I power it on I get no hard drive light shape or sound the HDD at all.

  Even I get nothing on the screen. Not even the Red sign boot Toshiba. So, it's worry in me as well.

  Thank you, Claude

  Hello

  I put t think it is a HARD drive problem.
  If the HARD drive is dead, you will receive a message on the screen saying that the laptop is not able to find a boot device.

  If the Toshiba start screen does not appear I think that it s something wrong with the motherboard. I guess that the graphics card is dead. But to be 100% sure, verification is required.
  In my opinion, you should ask a partner or a technician for assistance.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support