Portege Z30T-cannot install drivers LTE

Similar Questions

• 15 - s103tx: cannot install drivers

  I just bought this computer of India about a week ago and I installed windows 7 ultimate on the same (64-bit). I downloaded all the drivers I could find on the HP website and tried to install each of them one by one. I still cannot install two drivers (like what they show in OTHER DEVICES in the DEVICE MANAGER)

  1 3D video controller

  2. universal Serial Bus (USB controller)

  Under the display adapters, I see Standard VGA graphics adapters. I tried to install the graphics drivers several times but always the same question.  I also tried to install the drivers USB 3.0 several times but always the same question as welI. I'd appreciate strongly any n all the necessary help on the same.

  Hello:

  See if it works...

  1 install the Intel chipset driver and restart.  The second file on the list is the file of execution (exe) auto.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

  2. install the Intel HD graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24348

  3. install the graphics driver nvidia and restart.

  http://www.nvidia.com/download/driverResults.aspx/81392/en-us

  Try this driver usb3...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22824 & lang = eng

• Cannot install drivers for HP photosmart C4640

  Try to install the drivers for HP Photosmart C4640 online I have no CD. After downloading, click on install and I have two such messages: the instruction at "0x7712153d" referenced memory at "0x77c623d8" memory can not be read.

  Second: this computer only has not the necessary software support USB to allow installation of the USB installation.the cannot continue until it is resolved.
  Action required: click Cancel to exit this software installation. To install this device as a USB key. Please consult your computer documentation or documentation of expansion card USB for more information on USB drivers. Please I need help.

  Of devices and printers, remove all installed drivers now for this printer. Unplug the printer from the computer. Reboot the computer. Access

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3831669#n191

  and download the appropriate drivers for your operating system. Install them according to the instructions. Do not connect the printer to the computer before trhe instructions or guests will tell you of the screen.

  Tom Ferguson

• Cannot install drivers nVidia on M5-581TG

  Can anyone help please.
  I just bought a new M5-581TG with Win8 (I couldn't is no longer one with Win7, what I need).
  I reformatted the SSD and installed Win7. However, I can't load the drivers nVidia for the GT 730 m.
  I don't always get "no hardware found. I also tried to launch the program of detection of nVidia and who says that I have to
  obtain the driver from the manufacturer. I'm guessing there is a setting that needs changing BIOS but I can't find
  whatever it is (I don't have the password that allows me to access secure - start it shows password as "FROZEN" I think.)
  Can someone advise please?

  Update

  I've had zero help, I thought I would post my findings. They can be useful to others.

  Windows 7 Ultimate is now installed and works a treat!

  The graphics card problem is now solved. I do not understand why, but I had to install drivers nVidia for Windows 8 Acer despite my demotion to Windows 7. Yet, the Acer driver provides for Windows 7 are very old, so it was a bonus that the drivers of Windows 8 worked in only a few questions behind (307.17). nVidia site has 314.07 as later but they cannot run - I just received a message from nVidia that I have to get my manufacturer drivers. As this seems to be some time before Acer make available, I thought I would have a try to make compatible the 314.07. After some effort I managed and now uses the latest version without any problems. So, it is good to know that it is possible to "do it yourself", but not for the feint of heart.

  The problem of 'Frozen' hard drive seems to be a kind of glitch but software Intel confirms everything normal and not password protected. Twice now, when I checked the BIOS, it has been shown as 'Clear' - today it is 'frozen '! Go figure. I just need to determine if I can pass to a Samsung 840 - don't know if it will be physically fit. Finally, I am only just beginning now to 'use' the machine (I'm a software developer) and play the odd game - excellent rates too! So far this M5 seems to be a brilliant machine!

• Hotkeys cannot install drivers on windows 10 pro x 64 probook 4530 s

  Hello all, this problem occurred when want drivers for access keys.

  Recently, I installed windows 10 pro x 64 on hp probook 4530 s.

  Everything was ok, until I want to install drivers for access keys.

  When I trying to install sp56876. pilots of the exe, System sent a message that I need new framework

  

  I decided to install the 4.5 framework, but when I did I saw the following message

  

  Now I can't install hotkey drivers and I don't really know what to do next.

  Please help me solve this problem. A big thanks to all the world.

  Hello:

  The only suggestion I can offer would be to install NetFramework 3.5.

  It is integrated to W10.

  You need to add it by going to the control panel > programs > turn Windows features on or off > check NetFramwork 3.5 box and it will install.

  Restart, and then try to reinstall the hotkey driver.

• Cannot install drivers windows 7

  Windows 7-64 installing drivers for one D110a wireless network. Drivers were very nice, someday, that nothing prints. In devices and printers, the machine had a warning. Solving the said MC teredo Tunneling adapter could be solved by installing the drivers. Tried to install from there, CD and the Internet. CD and the Internet, I get a 'Fatal error' message without a code. Devices, I get "Can not find the drivers for this printer."  Event Viewer will not display any errors so I can't get a code. No printer listed in "Devices" either.  This has happened before and after trying to install 4 or 5 times it works. Not this time. Cache is cleaned, no known malware.

  Hi @grm8888,

  Thanks for getting back to me.

  Printing and scanning doctor solve this problem?

  When you are in the registry editor.

  2 navigate in the following: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

  3. in the pane, right-click disabled and select Edit. Set the value of DWord 0.  There is only one word that starts with the letter D. replace the 0 value, rather than for example: 200

  4 restart your computer and the teredo tunneling adapter turns on.

  If you have any questions, feel free to ask in the comments section below.

  If you encounter the Error Code 10 error, then follow the steps on my Error Code 10 Guide

  Instructions on the page:

  Understanding Teredo

  To better understand the Teredo Tunneling , you must first know what IPv4 and IPv6 . IPv4 is a Protocol IP affecting our computers with a unique address which is our identity to communicate with the world via the internet.

  Most of us, are on the IPv4 technology and so is the rest of the world. However, because of all the available IPv4 addresses being occupied the Internet is running out of IPv4 addresses as more and many of us have begun to use internet and networks strongly that is the main reason that we have now the IPv6 (Internet Protocol Version 6) which brings in countless addresses, which is 2 to the power of 128-2 ^ 128 (340,282,366,920,938,000,000,000,000,000,000,000,000) without end.

  Now that you know about the shortage of addresses IPv4 - it'll be easier to understand what the Teredo Tunneling . IPv4 is still widely used, to put in it, it's simplest form, I would say previously, everyone knew only one language, but now there are two so the person (System) in a language of IPv4 will be understood by the same, but not by those who speak in the language of IPv6, which makes networks communicate with each other is not possible , and internet is all about the connected networks and talk to each other - we need an interpreter to translate IPv4 to IPv6 and vice versa so that's what the Teredo Tunneling , this is an interpreter to treat language v6/v4.

  Card driver Microsoft's Teredo Tunnel

  In this section, I'll show you how to install the Teredo Tunneling adapter under Windows 7 - driver is built into Windows 7.

  1. to install it go to Device Manager OR hold Windows key and press R. In the race of dialogue that opens, type hdwwiz.cpl and click OK.

  

  2. once in the Device Manager -> click on network adapters

  

  3. then click on the Actions of the top tab and select "Add Legacy hardware.

  

  4. click on Next and following once again and once again (it will not find anything, worry not). You will then be brought to types of common hardware, select.

  5 scroll and select the network adapters , and then click Next. You'll now be adding hardware dialog box.

  6. now, manufacturer tab select Microsoft then from the network adapter tab, selectMicrosoft Teredo Tunneling adapter and click Next.

  

  7. After you click Next, click on Next again, and then click Finish.

  8. now download Malwarebytes Anti-Malware by clicking on the link below. Unfortunately, anti-virus software is like Norton, AVG and McAfee will not protect you against malware that can cause serious corruption so you need Malwarebytes to make a complete analysis. I highly recommend to get the premium version which will protect you in real time of the infection in the future against malware that can cause corruption, but if you do not want to buy then you can just get the free version.

  9. once it has been downloaded, install it. Open it and go to the Scan tab-> custom-> check scanning put in all the boxes in the left pane and select your drives in the right pane. Make sure you select all the boxes in the left pane, including the 'Rootkits Scanner"and click on"Scan"and wait for analysis at the end, it may take 4 to 6 hours, once finished, scan select ' quarantine all.

  

  Teredo Tunnel error should now be resolved, however, if you see a yellow exclamation mark then follow the steps below:

  1. open the Registry Editor.   How to open the registry editor

  2 navigate in the following text: HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

  3. in the pane, right-click disabled and select Edit. Set the value of DWord 0. There is only one word that starts with the letter D. replace the 0 value, rather than for example: 200

  4 restart your computer and the teredo tunneling adapter turns on.

  If you have any questions, feel free to ask in the comments section below.

  If you encounter the Error Code 10 error, then follow the steps on my Error Code 10 Guide

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Konica Minolta 2300W - cannot install drivers under Windows 7 x 64

  I tried several times to install drivers for my Konica Minolta 2300W Color Laser Printer under Win 7 x 64. The printer driver continues to fail. I studied information on the support site of Konica, and even Windows Vista drivers updated in starting y2008 do not, install with the same error:

  AddPrintPocess failed!
  pPathName: MIMFPR_P.DLL
  pPrintProcessorName: MIMFPR_P

  I've updated the latest driver available from MS Update printer list, and the closest version I see listed on my printer in the same family is the MC2350.

  Can someone help me get the correct printer driver or a workaround using existing drivers for Konica/Minolta Magicolor 2300Wfor Win 7 x 64?

  Have you tried right-clicking on the exe of the Minolta and then selecting run as administrator?

• Portege R500 - cannot install built-in XP Bluetooth drivers

  I recently installed XP and all is well (except for having them to change the hard drive in compatibility mode to fix SATA) except for one thing that makes me a wall: I can not install the Bluetooth stack. He comes to the point where he asked me to plug in the unit, but that's all.

  First, I downloaded the battery in the page of downloading my model (6.1), and then subsequently 6.4 of Toshiba Bluetooth support page - not working. I tried the Bluetooth monitor, which seems to do nothing except remove the external Bluetooth Toshiba program menu items.

  At the present time, there is a yellow antenna icon lit in the touchpad, LED display.
  By pressing FN + F8 seems to do nothing (also, the wifi works fine with Intel drivers).
  The BIOS has been recently updated to the latest version.

  Hello

  First are you sure that your portable computer with the module internal BT?
  You see a few BT labels at the bottom of the unit?

  If the laptop supports the internal BT module then installing BT stack should run without problem.
  After you run the exe file in BT stack folder/package, the installation should run through all the steps of the installation and rebooted again, you must activate the BT using the FN + F8 key combination.

  Using this button, you can switch between WiFi and BT. Choose BT you should be able to configure the BT

• Portege Z830: Cannot install Win7, complains about driver CD/DVD

  Hello!

  I have a brand new Portege Z830 and as usual wanted to start by installing a new installation of Windows 7 x 64 (that I don't want the software provided and cannot be trusted, that it is safe in any case). I have saved all of the disk, prepared a flashdisk USB bootable with Windows Setup and it. The flashdisk OK boots, Windows wonder about my language and keyboard, and then shows a screen where I can choose between installation, repair and something else (the Recovery Console, I think).

  I click on install, Windows starts the installation program aand once a first dialog box appears, it displays an error message that basically says (this is a translation of the message from my localized Windows): "a required CD/DVD drive driver is missing. If you use a driver from the floppy disk, CD, DVD, or the flashdisk, insert now. "And I can't get over this error message. The strange thing is, there is no reason for that Windows requires no additional driver, because he can read the installation flashdisk (apparently) and he can see the ultrabook SSD, too (can be verified as well in the recovery console and clicking the browse of this dialog box). So far I have tried:

  (1) four different Windows 7 images (two of them to MSDN AA, two physical, that have been used successfully to install the OS before).

  (2) switch SATA mode to AHCI Compatible.

  (3) two different flashdisks.

  (4) any combination of the boot order.

  Nothing has worked. I even tried e-mailing of Toshiba, but all messages to return with 'user unknown' (understandable, I had to guess addresses since Toshiba doesn't seem to provide some official way to communicate with them - or is hiding if well I have found it). Does anyone have an idea what I can try next? I rather like the Z830 and I'd love to use it, but the ability to install my own installation of the operating system is essential for me.

  Thanks, Pepak

  > I tried e-mailing of Toshiba...
  Maybe stupid question now, but have you tried to contact Microsoft too? If the BIOS is OK, and if all the USB ports work correctly, I don t think it is Toshiba related issue. Toshiba offers notebook with the original recovery image (WIN7 64-BIT HOME PREMIUM) and ability to create bootable USB stick with the recovery image that can be used when you want.

  What you do now is your own installation of the OS. Toshiba has to do is to offer to all the important factors, download tools and utilities on the drivers page.

  What else could you try? Try to get external USB ODD and trying to install WIN7 using Microsoft installation disc. I'm sure it will work.

• Portege M400 - cannot install OS or restore an old image

  I have a portege M400 and im hardly set any operating system of windows on them. When it gets to the stage where he asks what hard drive to put in place the windows files to, it does not detect the drives.

  I also have an image on a hard drive that I use a universal driver restore program to restore to any laptop regardless of the make and model and which also blue screens after the logo of windows xp when it starts up. The toshiba is the first laptop that I fell on this issue.

  The BIOS is currently 1.8 I think, I can't even put the hard drive in compatibility mode or AHCI.

  im a little confused about restrictions of this laptop.

  Can someone guide me on what I need to do to install windows on this machine please?

  Timox is right: the RAID driver must be added during the installation of Windows XP.
  During installation, you will be asked to add 3rd third-party drivers. As I m not wrong not you must press F6 to add the RAID driver.

  Very important note: do not format the HARD drive once the RAID driver has been added because this would remove the RAID driver from the HARD drive and installing Windows XP will fail again.

• Portege 3440 - cannot install Windows 2000

  Hello friends :)

  I have a problem with the installation of Windows 2000 on Portege 3440.
  I was running Windows 2000 with the FDD USBB (with driver for PCMCIA of CD-ROM) installation and CD-ROM PCMCIA. "Everything was ok at the moment when I came for winnt ' q.

  When installing without partition on the HARD drive was appeared on blue background information: "could not find a place for a swap file. With partition (FAT32, 6 GB): "Setup could not install the Windows boot loader. To ensure that your C: drive is formatted and that the drive is not damaged. I tried with three other HDDss.
  What should I do to install this system? (Same users do not have these releases)

  Thanks for help
  Adrian

  Hello

  1 don't forget to prepare your hard disk with fdisk (a bootable partition) and format it with the Fat32 file system

  2. start by a MSDos saved in your floppy drive-drive with drivers for your PCMCIA CDrom drive (Freecom)

  3. copy the entire i386 to the W2K installation CD directory your HD, be sure to have loaded smartdrive, otherwise it will take ages!

  4 start again with the saved, go to the i386 directory and start Windows NT

  You can look here for more information about freecom pilots and the bootdisks: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232
  On your 3440 it should be easier than with the R100 because of normal 2.5 "HD 6 GB, but the problem is basically the same

• Re: Portege R400 - cannot install 3G on Windows 7 driver

  Hello

  I installed Windows 7 Beta on my R400 Windows Vista cannot use on the R400 (way to slow down).
  Everything works fine except for the 3 G module.
  I am not able to install the drivers.

  The latest status info is "copying new files" before the beginning of the installer roll back automatically and ends with the message "not installed".
  I tried redownloading the file, but no luck

  Any idea?

  Hello

  Windows 7 is a beta version.
  Eventually it a bug in the OS

  It would also be possible that the Vista driver is not completely compatible with the OS Win Vista 7 and so it cannot be installed on this operating system.

  As you can see everything that could cause this problem

• Portege M400: Cannot install windows XP

  Hello

  My friend gave me his Toshiba Portege M400 (PPM40E) at the table of settings windows XP (HHD is already formatted copmletely).

  Before that I've never worked with SATA controller

  So, when installing RAID drivers are required for any HDD lying.
  I bought the USB floopy and downloaded some drivers from Intel.

  Having suffered a bit, I found requireded (as I thought), hard disk drivers detected (even the license agreement I signed) but that pilots still needed to proceed with the installation.

  IF someone faced this problem can you send me on my e-mail ([email protected]) required drivers or give me an exact link?
  Looking forward to your advice.

  Thank you for understanding,
  Best regards from Russia

  Hello

  Maybe a stupid question but why you do not use supplied recovery media for the installation of the OS? As much as I know Portege M400 (PPM40E) comes with Windows XP edition PC of Table (teacher WXP).

  Anyway, check it please this article http://support.microsoft.com/kb/316401/en-us
  Maybe it will help you understand the problem.

• Cannot install drivers MyDaq

  Hello everybdy. I have a myDAQ NOR am I trying to install on my computer. I don't have the installation disc, but seen on this Web page (http://www.ni.com/tutorial/11431/en/) that I can download the drivers for the myDAQ online. After you have installed the latest NI ELVISmx 15.0 drivers, I still cannot download the drivers for my myDAQ - my computer tells me that it cannot see the necessary drivers on my computer. I'm running a Lenovo Z50 labtop with windows 8.1. Does anyone have an idea as to what can happen?

  Thanks in advance

  Too bad I've sorted it now. Just Elvis has not been installed correctly on my computer

• Cannot install drivers for HD Audio win 7 64 Pro Windows default for generic HD driver

  Hi all

  I pray that someone can enlighten me as to how to install the correct audio drivers HD in Win 7 Pro instead of generics.

  The motherboard is an Asus Rampage Extreme and the sound card is a PCIe that accompanies the Board of Directors. The manual calls what it a 'card SupremeFX X - Fi' my system is a dual boot with XP on another partition, the sound works fine, XP, with all the extras, I need.

  If I go to Device Manager and remove the existing driver, and then when I try to install the ones I want, I get a message saying ' cannot find a device supported on this machine. "and the installation program quits.

  Of course when I reboot 7 wants to reinstall what he thinks is right. I'm at square one!

  Once the proper drivers are installed, I can then install the Creative Sound Launcher located in the Tools menu. It gives me a graphic equalizer, a Crystallizer and many other controls for the sound card. I can install these items listed, but none of them will any work without the correct driver.
  They have simply open and refuse to work saying "Device supported by this application is not found on this computer."

  I need a way to install the Asus / drivers Creative instead of the 7 seems to think are "correct."

  Nowhere for the MB manual called the card its a 'creative', but it is quite possible that the software package that comes with it has creative name on it in the world.

  A search of the site Creative shows no drivers for a card with the name that I mentioned above.

  Asus forum do not know more so here!

  Thank you all in advance!

  The dual boot is your problem. Why do you always need XP?

  And you're going to have things the wrong way!

  You need specific drivers XP on this partition and specific drivers W7 on that partition.

  See you soon,.

  Jerry

  HI Jerry,

  Thanks for the reply. I don't know how I mislead you with my ad. I said that the sound is FINE under XP it's W7 who "was" that is rampant in me.

  I eventually found the drivers from the Asus site and program utility that controls the different things like the EQ and others. Note that some of them were not in the right directory and I would have never thought to look under the heading where they have resided!

  I use XP because I have so much software that doesn't work on 7. I am also on disability and can't afford to start replacing and material. At the moment the dual boot is a solution very, I see using a virtual machine in W7.

  Problem solved, I had needed was someone to Asus who has understood my dilemma.

  See you soon

  J T