Portege z830-10F - H5321GW Ericsson plug only if restart the wwansrv service

Similar Questions

• Portege Z830-10F - WLAN stops working when USB3.0 port is in use

  Hello

  On my Portege Z830-10F wireless stops working when I plug in a device on the USB 3 port. The wireless connection back upwards as soon as I remove the device.

  The problem occurs with any device I plug. I tested with disks external usb (usb 2 and usb 3), USB, a receiver wireless mouse and a printer/scanner.

  This problem only occurs when something is connected to the USB 3 port. The USB 2 ports on the rear do not have the problem.

  Port USB 3 itself works very well.

  Running windows 8 pro:
  * Wireless lan adapter: Qualcomm Atheros AR9200WB-1NG (version 10.0.0.75 driver)
  * USB port 3: Renesas USB 3.0 eXtensible Host Controller - 0096 (version 6.2.9200.16420 driver)

  I see that I ve got the latest drivers installed on the wireless LAN card and the usb host controller 3.

  The problem arises as well on windows 7 and windows 8 pro. I used the wizard to upgrade Toshiba upgrade of windows 7 to windows 8.

  This problem is present since I got this laptop. I ve already done a reinstall / recovery back to the original with windows configuration 7 but this doesn´t solve the problem.

  Does anyone else have this problem?

  Is there a way to fix this?

  Thank you!

  Hello

  To be honest, it's the first time I read on this issue.
  I have no idea how a device attached to the USB 3.0 port could affect the Wlan functionality.

  I assume its hardware fault and cela must be verified by a certified maker Toshiba.

• Portege Z830-10F no display - power light flashes

  Hello

  I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
  What it means?

  (PC was left alone in the night on table)
  I try to disconnect the battery and load without it, it did not help.

  Indicator DC IN (first on the left):
  Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

  ((Deuxieme power light to the left):
  Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

  Also try this.
  Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
  Now connect the battery and AC adapter and turn on the device.

• Portege Z830-10F - Wi - Fi adapter is very low

  Hello

  I have Toshiba NB305 Netbook and Pavilion dv6 too and inside wireless adapter works fine Intel. But in the Portege Z830-10F adapter WiFi Atheros AR9002WB-1NG sees only two of the ten wi - fi networks... and often disconnects.

  Can you recommend the latest drivers for this card?

  See the portal Toshiba WLAN and last version here - http://aps2.toshiba-tro.de/wlan/

• Calibration Portege Z830-10F and battery

  I have a problem with the Portege Z830-10F battey.

  With no alert, closing down and when to start the load at the level start at 51%.

  In an hour, the charge is complete.

  There is a method to calibrate the battery?

  Best regards.
  Nicola

  > There is a method to calibrate the battery?

  The battery can be calibrated to unload the battery until it is completely empty and then until the battery indicator would turn to green (in some cases blue). This indicates that the battery has been recharged.
  This procedure should be repeated several times in the line.

  But be careful: even if you would calibrate the battery, it might be possible that the battery would not provide the same performance due to the age of the battery.

  Sooner or later each battery began to lose the performance load and in such a case, it s just a matter of time, when the battery needs to be replaced.

• My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  My utility account shows no Keychain Access.  The only file in the public services is citrix online.  How can I find my files utility?

  Omegamax,

  Have you tried spotlight?

  

• Need a part for my Portege Z830-10F spare

  Anyone know the ID, ore where I can get the part near the screen?

  I can't find it anywhere, and I've lost it, removes a go´s live :(

  https://www.dropbox.com/s/q2aj21xzwpcvl25/IMG20141011105220_1.jpg?DL=0

  It s a Z830-10F

  Not quite sure what you are looking for but the photo shows the left screen hinge.
  In any case, all parts could be ordered directly in local Toshiba authorized maintainer.
  Get in touch with the guys and ask such part compatible.

• What RAM Portege Z830-10F supports?

  How much memory RAM can I put in my Z830?

  Can I install a module of 8 GB in my ultrabook?
  Really can only go to 6 b?

  According to the specifications of the laptop upgrade maximum is 6 GB. You can remove a 2 GB module and replace it with 4 GB. Compatible 4 GB of RAM has PA3918U-1M4G part number.

  In my opinion, 6 GB is enough for this machine. Optimize the preinstalled operating system and I think that the system will work perfectly.

• Portege Z830-11J black screen after only 8 Win wakes up from sleep

  I have the 11j edition that is not Bu201 at all!

  It seems that Windows 8 does not know how to use hibernate, sleep and resume with the edition of 11j.

  Windows 8 stops to sleep, if push the button he wakes up, all WWAN and WLAN led o.
  But the screen remains black, the fan is off and the cpu gets really hot.

  Does anyone know when Toshiba will support the laptop?

  Hello

  As far as I know the unit was pre-installed with a Win 7 64 bits of the system.
  Have you noticed the same situation using Win 7 in

• Portege Z830: It takes a long time to load the utility of fingerprints after fashion 'sleep'

  It takes a lot of time after sleep until a fingerprint is recognized.
  Nothing to do here?
  Change the priorities of awakening? And how?

  Since when did you notice this behavior?

  Perhaps you should tell us what model of laptop and operating system do you use?
  Is the last fingerprint utility installed?

• Battery discharge even if Portege Z830 is off

  I have a Toshiba Portege Z830-10F.

  I have a question and a question about the consumption of the battery while the PC is turned off.

  Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level decreased significantly (10-15%).

  I even had the case where, after a period of 3 to 4 days, long weekend during which the aircraft had not been in service AT ALL, I could not reboot the computer, because the battery has decreased.

  I had to plug in and then start it.

  This seems rather odd and strange and would so whether there is a specific setting had to be changed so that it does not happen.

  I upgraded to the latest version of the Bios (v 1.40) and that doesn't change.

  I look forward to your help and your support.

  Stephan

  > Which means that when I stop the machine, when I restart the device one day after (or during the night) my battery level has declined significantly (10-15%).

  This can result from certain options enabled in the BIOS.
  For example option Wake up LAN or keyboard or power of dough at low level to use even if the laptop is turned off. Disabling this option might help with this problem.

• Portege Z830 - replacement motherboard

  Dear all,

  My Z830-10f (an Italian model - http://www.toshiba.it/discontinued-products/portege-z830-10f/) core i5 power over more and gives a code of 72 h (pay-per-view voltage is not more than 0.68V when the computer starts up).

  After a bit of Googling, I realized that the motherboard has a serious problem and must be replaced.

  On ebay I found a chance mb of the United States, but it is another model Z830 Intel Core i7 - 2677M @1. 80 GHz. Sthtiquement, motherboards look identical, so I wonder if they may be compatible.

  I know I should find the exact replacement part, but it's really a jungle and probably all the differences are related to the different codes used throughout the world.

  Any suggestion is really appreciated!
  Thank you very much in advance!

  Marco

  Hello

  From my point of few new motherboard of another Z830 would be compatible.
  The motherboard has exactly the same dimensions, but only supports another CPU.

  I guess that the BIOS would be already available on this new motherboard and the other new i7 CPU supports the internal GPU (Intel HD Graphics 3000).
  So you should not get any problem with the graphics card, but also the other parts like the RAM or HARD drive...

  I think you should get a blow and go with this mobo.

• Portege Z830 - Infineon TPM device cannot start (code 10)

  Hello

  I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
  I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
  This device cannot start (code 10).

  I downloaded all the drivers from Toshiba, but it does not work.

  Any idea?

  Thank you.

  Hello

  The TPM is optional and not equipped Portege Z830-10F unit a module TPM.

  Welcome them

• Portege Z830: I want to disable internal LCD and use only the external monitor

  I have a Toshiba Portege z830.
  I use my laptop in "Extended desktop", mode with an external monitor, which is the main display.
  In this mode, the two screens are still on, but I want the built-in LCD screen to be opened only when I use it.

  Is this possible?
  Thank you.

  Hello

  In my opinion, this is not possible.
  In extended mode, you use and display internal but extended and the long part is visible on the external monitor.
  In such a case its any that your external monitor is set as main display.

  If you want to use an external monitor only, you can only export the video signal on external monitor by pressing FN + F5

• Portege Z830 - 11J - several questions after Win8 Pro upgrade

  Hello

  I bought a Portege Z830-11J with Windows 7 Pro.
  I bought the Windows 8 Pro Upgrade and did a very basic * clean installation *.

  I installed the Windows 8 Pro from scratch a (empty) disk.
  I checked for missing drivers Device Manager.

  I did a download for * Windows 8 * drivers with my serial number.
  I extracted only the drivers for the device and didn t installed all the additional software.

  I installed the drivers from package 3grdv-20120119182104 H5321gw
  I installed the drivers of the fingerprint of the fp - so package - 20121025114331
  I installed the drivers from package bltstk-20121015121744 bluetooth stack

  all drivers and windows 8 are 64-bit.

  The installation of windows has no update and the power management settings are by default.

  After 30 minutes, the ultrabook goes into deep sleep, led power mode fading slowly. all right.

  Sometimes the ultrabook wake up, if I press the power button and all is well.

  * BUT not to every time the ultrabook will wake up! **

  If she woke up, the Black Guard screen won´t, there is no video on the VGA port.
  The keyboard lights up if press and that s all the.

  If I Don t to power down (press power button very long), the hot get extrem ultrabook to the position of the cpu.

  Can someone help me with this problem?

  BIOS is 1.70

  Help...

  Hello

  I agree with Akuma, some Windows 7 drivers are compatible but many drivers Win 7 problems to Win 8.

  In addition, you should try to turn off the laptop, press Windows key + X and then choose stop.

  The point is that Win 8 be hybrid mode if you n t press Win + X key so that closing.

  Here's a tip:
  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm