Portege Z830 - cannot access page drivers Win 8

Similar Questions

• Portege Z830: Cannot install Win7, complains about driver CD/DVD

  Hello!

  I have a brand new Portege Z830 and as usual wanted to start by installing a new installation of Windows 7 x 64 (that I don't want the software provided and cannot be trusted, that it is safe in any case). I have saved all of the disk, prepared a flashdisk USB bootable with Windows Setup and it. The flashdisk OK boots, Windows wonder about my language and keyboard, and then shows a screen where I can choose between installation, repair and something else (the Recovery Console, I think).

  I click on install, Windows starts the installation program aand once a first dialog box appears, it displays an error message that basically says (this is a translation of the message from my localized Windows): "a required CD/DVD drive driver is missing. If you use a driver from the floppy disk, CD, DVD, or the flashdisk, insert now. "And I can't get over this error message. The strange thing is, there is no reason for that Windows requires no additional driver, because he can read the installation flashdisk (apparently) and he can see the ultrabook SSD, too (can be verified as well in the recovery console and clicking the browse of this dialog box). So far I have tried:

  (1) four different Windows 7 images (two of them to MSDN AA, two physical, that have been used successfully to install the OS before).

  (2) switch SATA mode to AHCI Compatible.

  (3) two different flashdisks.

  (4) any combination of the boot order.

  Nothing has worked. I even tried e-mailing of Toshiba, but all messages to return with 'user unknown' (understandable, I had to guess addresses since Toshiba doesn't seem to provide some official way to communicate with them - or is hiding if well I have found it). Does anyone have an idea what I can try next? I rather like the Z830 and I'd love to use it, but the ability to install my own installation of the operating system is essential for me.

  Thanks, Pepak

  > I tried e-mailing of Toshiba...
  Maybe stupid question now, but have you tried to contact Microsoft too? If the BIOS is OK, and if all the USB ports work correctly, I don t think it is Toshiba related issue. Toshiba offers notebook with the original recovery image (WIN7 64-BIT HOME PREMIUM) and ability to create bootable USB stick with the recovery image that can be used when you want.

  What you do now is your own installation of the OS. Toshiba has to do is to offer to all the important factors, download tools and utilities on the drivers page.

  What else could you try? Try to get external USB ODD and trying to install WIN7 using Microsoft installation disc. I'm sure it will work.

• Cannot access page Plugin-based PDB (protein Data Base)

  OS: MacOS Yosemite 10.10.3. Cannot access the http://www.callutheran.edu/Academic_P.../lzipmast.htm Web page that uses a plugin of the PDB. I don't know if there are plugins for this format (s?), in FireFox, or anything else besides. Safari reports that "the sype file not specified", so maybe there is a mistake in the Web page itself (humor: "these biologists are sloppy with their microscopes to $5 million and more, but they don't know much about computers..")

  This page has not been modified since before that Firefox is a browser. There is probably a plugin for Internet Explorer v6 that will display that content. But you'll need a computer with Windows XP SP1 which is never updated Internet Explorer, and then find and install the plugin to make it work.

  You can download the file directly, if you want to try to find a program that will open its doors this: http://www.callutheran.edu/Academic_Programs/Departments/BioDev/omm/lzipper/pdbs/lzipdna1.pdb

• Portege Z830: cannot change the brightness of the display using FN buttons in XUbuntu

  Hello world

  It is not possible to control the brightness of the Fn key on my Portege Z830 - Xubuntu 11.10 new

  The brightness is at maximum and too high.

  Do you know how to control?

  Thanks for your time,

  James

  Hello

  As far as I know this kind of thing is controlled by software. Problem is that Toshiba doesn't support Linux and doesn't offer any software that controls it.
  What you can do is to visit some Linux forum and share your experiences here.

  Maybe some of the Linux experts here have an idea how to do it.

• Cannot access 'page properties' update the background image in my new model Web site

  

  Hello

  I am new to Dreamweaver and I can't access "page properties" so I can change them.
  I guess it's something really simple, look at me, but I'm just not see it.
  Can anyone help with this?

  See you soon!

  Make sure you have a page open in Design view. You will not have access to the "page properties" in Live View mode. You have also access without an open page!

• Re: Portege Z830-11J: Intel AMT/drivers and ME Interface drivers for Win 8

  Hello

  I tried to install the divers of the AMT.

  But the installation fails, it does not find any interface of the amt.

  should what version of driver I use?

  Hello

  Have you found a driver Intel AMT for Win 7?
  It is available on the page of the driver Toshiba UE (Active Management Technology)
  As far as I know most of the Intel Win 7 drivers are compatible with Win 8.

• Inability to access the drivers win 7 x 64 for Satellite C50-A-1JT

  SER. Numb 5E052585U
  Prod. code PSCJGE-00100FY4

  Tried with more computers, but always the same links do not work
  Not a single link for win 7 x 64 driver does not work!

  It would be useful to download drivers for win7 drivers all in one drivers pack... (win7pack RVD)...

  Help, please

  Hello
  I checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and you will find 18 drivers, tools and utilities for your laptop model.

  I tried to download some of them but I've noticed the same problem. I assume that there is a temporary problem with the servers. Try please download them all later.
  > It would be useful to download drivers for win7 drivers all in one drivers pack
  Something like this is unfortunately not possible. Each driver, tool, or utility must be downloaded separately, one by one.

• Cannot access Page of Admin

  Hello

  I made the change/upgrade account imposed on me & now I am unable to access the Admin page which is very frustrating.

  When I try to access the Admin page that asked me to provide a Username & Password & when I enter my user name & password it just returns me to the same login page "Authentication Required".

  I would appreciate your help in this matter.

  Hi maximusmayhem,

  In addition to what said StephenB, the default password is "password" or you can use the one you made when setting up the device. If in the case that it still won't let you in, you can perform the OS reinstall.

  Kind regards

  BrianL
  NETGEAR community team

• HP cannot find Page drivers

  Hello

  In fact, my problem is that when I search for my drivers on the HP website through google, the page where I used to download my drivers before is not found by HP now. Don't know what the problem is! Another friend of mine is having the same problem. Please help quickly.

  Thank you.

  Model = HP Pavilion G6-2130se

  Number of product = B3R35EA #ABV

  Operating system must be Windows 8

  Use this link

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5285304

• Cannot access internet after Win XP suspend molten v4

  With the help of Fusion v4.1.1 on OS X v10.7.2 with Win Xp Pro SP3 guest.

  When the customer is suspended and then re-enabled, internet connection still shows as connected, but can no longer access the internet. I have to restart Win XP and then it can access the internet again very well.

  Thank you

  There are several command-line utilities, VB Script methods, etc. of PowerShell. It is more of a general scenario of Windows and you should be able to Google it and find enough information to build your own script.  If I had some time right now I throw something together, but I have to last-minute holiday shopping to do and only have a bit of free time after Jan 1.

  I used DevCon in the past to create a simple. CMD Script to do this.

  Take a look at: functions of the utility DevCon tea as an alternative to Device Manager

• Dvd - cd rom on my laptop (Acer Aspire 5515) stop working, I get a code 19 saying that windows cannot access the drivers for this device., how can I solve this problem?

  I had used the Device Manager, try to reinstall the drivers fix for windows etc nothing works

  Hello

  ·         Did you make any changes before the show?

  I suggest that you run the fixit provided in the link below and check if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Portege Z30 - cannot access the bios Setup

  Hello

  I can't enter BIOS setup when starting. Pressing on F2 allows me to enter the master password and HDD/SDD (confirmed validation), but the screen freezes at the "Toshiba configuration utility' graphics without any progress.

  This problem began to appear quite suddenly, I enter the setup of BIOS several times before without any problem. The only change that's happened that I know is an event of disruption/recovery failed.

  My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that? Is it possible to force it to boot normal start time? I'm using Linux, so I can't use the Windows of Toshiba Utilities.

  > I'm using Linux, so I can't use the Windows of Toshiba Utilities.
  That s bad:(dans le Toshiba HW Setup vous trouveriez un paramètre pour modifier l'option vitesse de démarrage.)

  > My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that?
  Hmm in my opinion, if the start-up speed would be set to fast, you wouldn't be able to press F2 and enter the BIOS password.

  However, in other cases, if the startup mode is set to fast, you can enter the first INS key BIOS and press the F2 key

  Give it a try.

• Portege Z830 - restoration and reconstruction

  I have a Portege Z830 who plays up!.

  I tried to load on the main drivers of function and a few other utilities toshiba to get the lit keyboard, IE helps high and low BRIGHTNESS keys. It did not work.

  Since then, my laptop takes centuries start, I can't use windows update, it crashes and he asks me my password but I can not enter as it crashes again.
  If I use windows troubleshooting tool, which weighs too much. And internet Explorer within the win8.1 does not even the bbc.

  I'm close enough to think that I have to do a full rebuild.

  My challenge is that it is installed with Windows 7 and I have upgraded to windows 8 and 8.1.

  My questions are:
  1. everyone knows what precedes and is there quick ways to solve the above problems.
  2. What is the best way to rebuild my laptop, I have to go back to windows 7 and then upgrade to windows 8 again?

  Ideas gratefully received, I'm ok, reconstruction not eager not to there because it takes forever to backup and restore, and I must be missing something. But I think its necessary.

  As far as I know that the Portege or Satellite Z830 series was not supported to win 8.1 by Toshiba because he did not appear in the Windows 8.1 compatibility matrix.

  This means also to win 8.1 drivers or software for this series isn't available and not downloadable. This could be the reason why you n t get some special features for laptop.

  From my point of view of a few you might try to fix the Win 8.1 preinstalled using the repair feature s own system. If this doesn t help, I'm afraid, you need to restore the system of m.

  Are you what is the best way to rebuild the laptop?
  Well, it depends on the operating system.

  The Portege Z830 was pre-installed with Win 7. In this case the use of the Toshiba recovery disc install Win 7 again.
  If you want to reuse 8.1 Win, you have two choices: either you would update the Win 7 system-> 8-> 8.1 Win Win
  Or you buy the Win 8.1 Microsoft license and install own 8.1 win on this laptop.

  But as I said above: the drivers Win 8.1 and the software isn't available for this model

• USB 3.0 issues with Portege Z830 & Renesas electronic drivers

  Hi all

  I have a Toshiba Portege Z830. Until today I have use any pendrive USB 3.0 external. I bought a Kingston HyperX, but when I try to use it, the port recognizes the drive, but disappears in a few seconds...

  Also when I use a port USB 2.0 back, it displays the unit, but it cannot read the contents of the USB drive.

  I checked in internet forums, and I see similar cases, but not a clear solution...

  More information:

  1. the disc works if I restart windows on SafeMode (Windows 7-64 bit)
  2. the disc works on other computers (without electronic drivers Renesas).

  I think it's a problem of Renesas electronic drivers, but I've updated, installed the modern version, power usb change, etc. but no solution...

  This ultrabook is an expensive appliance, as well as the USB key, and of course, this should be a solution...

  Thank you for your help

  Hello

  I downloaded the latest 2.1.28.0 USB 3.0 v driver available from the Toshiba UE driver page.
  The fichiers.ini (64 bit driver) contains information that this USB 3.0 host controller driver is developed by Renesas Electronics Corporation.

  I read a lot about the problems of USB 3.0 as part of different devices to USB 3.
  The questions are not related to a specific manufacturer for laptop or device in most of the cases it s a compatibility issue between the two devices, I think that's most of the time impossible to test all USB 3.0 flash drives, HARD drive, etc. with different controllers USB 3.0 for compatibility problems always seems

  I found a 3rd party page where you can find a few other drivers USB 3.0 of Renesas and NEC. But the use of these drivers is at your risk and perils do not know if they work properly.
  http://www.station-drivers.com/page/Renesas.htm

  I think you might have to force windows to use the specified driver, then first choose "Browse my computer dethrone" and then "Let me pick from a list of device drivers...". ». This must be done in the Device Manager.

  Would be interesting to know how it works

• New Win 7 computer cannot access the IP address of the network printer. Help, please.

  Greetings,

  -----------------------------------------------------------------------------------------------------------------------

  UPDATE: we have found the solution to this problem, we, and that I posted an explanation as well as two ways to solve the problem in my 2nd post on May 5, 2015. Scroll down to it for the solution. Unfortunately, Microsoft does not allow the OP to mark one of their own messages as 'the Answer' so this thread continues to be listed as "no answer" when he actually answered me.

  -----------------------------------------------------------------------------------------------------------------------

  The original message follows...

  We cannot sign a new Win 7 (64-bit) computer to a printer ethernet established in our local network of 'working '. We have reached the limit of our troubleshooting skills and expertise assistance.

  Our Local network
  ------------------------
  The printer is a Dell 5100cn workgroup laser that is connected via an ethernet cable to a 10/100 workgroup switch 5-port Cisco/Linksys. The switch is connected to the built-in cable Motorola modem / 4 port gigabit router / WiFi access point. There is no server between the printer and the network.

  Other computers on the network run also Win 7 and have no trouble seeing and using the printer. Some computers are connected via a gigabit ethernet cable to the router Motorola. Other computers connect wireless WiFi (once again, by the same Motorola device). All computers, including the new ones, are attributed to the same workgroup.

  The printer has a static IP address. It also has an integrated Web page accessible within the network via a browser to view the status of the printer. All previous computers can view the status of the printer Web page by entering its IP address in a browser.

  The new Win 7 computer
  --------------------------------
  At the Windows command prompt, we successfully ping the IP address of the printer and received a return signal. However, we are unable to connect to the IP address of the printer (and status Web page) with a browser. And we cannot find the printer when install us the printer driver. We have tried to turn off the Windows Firewall and it did not help.

  When we install the driver, move us as a 'local' printer and create a new "Standard TCP/IP Port" for her. We enter the static IP address of the printer and name the port. Define us the Protocol to "LPR", enter the name of the queue ("lp") and activate SNMP State with name of the 'public' community and the index "1". These settings have worked very well with our previous computers.

  When the time comes to 'choose printer', we select 'have disk... '. ' and use the Dell 64-bit for this printer driver. But it does not work and do not print a test page. We even tried to install the printer as a 'network' printer driver, but it does not, either. In addition, the 'local' method always seemed to work best in the past.

  The new computer has no harm to see other computers and devices on the network. For example, there is a NAS connected to the same switch Cisco/Linksys like the printer and the computer can access the NAS via its static IP address. The new computer can also access the internet. He can't use the IP address of the printer. We even tried to change the address IP of the printer, but that did not help either.

  Despite the fact that the work - the network troubleshooter Windows command prompt ping indicates that the printer is not responding. What do we lack? Help, please.

  Greetings,

  I hope that this will be our last post on this subject. We have discovered the source of the problem and can offer two 'fixed' in case someone else runs into the same situation.

  With the help of MSConfig and a process of elimination, we have disabled non-Microsoft services that were running on the computer until we discovered that "Qualcomm Atheros Killer Service V2" was the source of the problem.

  Explanation

  ----------------

  Our new Win 7 computer contains a communication module ethernet/WiFi/Bluetooth e2200 Qualcomm Atheros. The manufacturer provides a '' Killer Network Manager '' for this system. Its purpose is to monitor and control the flow of data over a network connection in order to optimize for. For example, the user can choose to give the program A high priority and program-B low priority. This ensures that the program-A is less lag in the network traffic.

  The primary market for this function, so far, has been the online game (where the name of 'Killer'). It allows players to channel the bulk of the bandwidth available to their game and away from other programs and services that are running at the same time. A response faster online gives the player the advantage it needs to get "kill him" before someone else.

  This system of control of bandwidth has interfered with data packets of return of our network, clearing communication between our computer and our printer printer.

  Difficulty 1

  --------------

  The simplest solution for us was to disable 'Qualcomm Atheros bandwidth control' for the ethernet NIC that has been accomplished by going to: Windows Control Panel > network and Internet > Network and Sharing Center > change the settings of the card (in the sidebar). Then we clicked on our connection to the LAN (our NETWORK ethernet card) and select the 'Properties' command Finally, on the Networking tab, we have disabled 'Qualcomm Atheros control bandwidth' and clicked 'OK' button to close.

  All that was needed after that was a quick restart and we were able to access our printer even with the killer Network Manager and functioning of Qualcomm Atheros Killer Service V2.

  Either way, we left the control function of bandwidth enabled for wireless (our) network connection because we do not plan on using this network printer when the computer is untethered to ethernet.

  Difficulty 2

  --------------

  If you don't want the killer running Network Manager on your computer, you may be tempted to uninstall. Do not! Uninstall will also uninstall the drivers needed for your ethernet, WiFi and possibly your Bluetooth as well. We heard that some users have communicated with Qualcomm and were able to coax, on their part, the necessary drivers comm without luggage "Killer". But you don't need to do it, either.

  All you need to do is: (1) remove the 'Killer Network Manager' of the '"start up" folder of the start menu of Windows (under "programs") and (2) using MSConfig, uncheck "Qualcomm Atheros Killer Service V2" under the ' Services ' section. Then reboot and you're good to go. The killer Network Manager and his service will not work.

  Moreover, the reason for which we did not chose this method, ourselves, is because we see one deserves that available Killer Network Manager so that we can block network traffic to select programs. Solution 1 converts this easy thing because the Ethernet bandwidth control can be quickly activated again if she is ever desired. And we're leaving it enabled for our WiFi.

  Best regards, David-EH