Portege Z930-108 - collapsed work SD card reader

Hello

I bought a ultrabook Portege Z930-108 with Windows 8 (x 64).

A week before, the card reader stop working (I tried different cards).
I updated the drivers from RICOH card reader controller without resolving the problem.

Note that Device Manager indicates that the controller is installed ok and the unit works without problem.

Do you have any idea how I can check that SD card is not vented?

Best regards
Kostas

> (I tried different cards).
Die which cards you use exactly?

The SD CARD slot supports the following cards:

SD card - 8MB - 2 GB / microSD (with adapter): 512 MB - 2 GB
SDHC - 4GB - 32 GB / microSDHC (with adapter): 32GB
SDXC - 64 GB
Mini SD - miniSD (with adapter): 32 MB - 2 GB
Micro SD - microSD (with adapter): 512 MB - 2 GB
MultiMediaCard - 8MB - 2GB

Tags: Toshiba

Similar Questions

  • Partition of hibernation of the Portege Z930-108

    Hello

    I just bought the Z930-108 and I found on the SDS (128GB) a partition called hibernation, but the normal system disk, there is also a hiberfile.sys.

    (1) is it the same function for both?
    (2) is the hibernation partition does not work?
    (3) can the hibernation partition be incorparated in the system partition to have more available space?
    (4) the removal of the hibernation partition would invalidate the recovery process using the SSD partition?

    Thank you!

    Hello

    AFAIK the hibernation partition is used by the Windows system, and he needs this partition to wake the laptop much faster than usual hibernation mode
    I thought hiberfil.sys had taken the place of suspension on disc, but it seems that this hibernation partition is much more powerful. I wouldn't delete this partition if you want the Hibernate the laptop.

  • Portege R830 - driver for WinXP SD card reader

    Hi all

    Quick question - I have problems reading SD cards on my R830 Windows XP with SP3. I installed all the Toshiba official drivers, including the 'Ricoh Card Reader 2.11.17.02' driver, but every time I insert an SD card it does not not detected. Anyone got any ideas how I can get the SD card reader work?

    Thanks in advance!

    Do you do maps/maps only sustained use?
    What is the status of the card reader in device (storage controllers) Manager?

  • Work of card reader that after I restart the Satellite P305

    I was wondering if anyone else has had this problem. I have a P305 and is the only way that the card reader is working after I restarted the computer.

    If I insert the card and then take it out and try reseating the computer cannot read the card.

    Please if anyone can help.
    I called technical support, but they don't have a clue.

    Thank you

    Hmm, it sounds a bit as the Plug N Play service and the Smardcard would be disabled or wouldn't run properly.

    You can check if these two services are running.
    You can check this in;
    Control Panel-> Administrative Tools-> Services

    There you can disable and enable the services manually.

    The other option would be a reinstall of card reader driver.
    Check it out!

    Concerning

  • USB not port not working and card reader doesn't work is not on my desk.

    My usb port and built-in card reader does not work on my desk, also my external speakers do not work. stakeholders work with my laptop, it is not connected via USB.

    Hi yankee7,

    · You receive an error code or error message when you connect a USB device?

    · Do you remember recent changes made to your computer before the show?

    · What is the number and the model of the computer?

    · What is the service pack installed on the computer?

    Check the status of the device in Device Manager. Follow the steps below:

    a. click on start

    b. in the run box, type in devmgmt.msc

    c. expand USB bus controllers

    d. check if no yellow bang is listed (double-click on the device with a yellow bang for the error code)

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 stopped at my work SD card reader.

    My SD card reader does not work in Windows 7. Have looked in Device Manager and everything is here - tried to update the drivers and says mine are more later (2006)...

    I'm not impressed with this system... looks like another farce of Vista for me...

    Also I had to hard starting 4 times because my screen froze... WTF is happening?

    Hello
    Open Folder Options by clicking on the button start , by clicking on Control Panel, appearance and personalization, and then clicking Folder Options.
    Find these settings on the view tab in Folder Options.

    Disable the empty readers to hide in the computer folder check box and then click OK.

    If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

    If your issue is resolved, please indicate then your wire is with solution.

  • Win 3G on Portege Z930-108 8.1 driver installation error

    Hello

    I installed 64-bit Windows of 8.1 and when installing the driver 'H5321gw Ericsson for TOSHIBA' not recognized me and I get an error. I tried to install the version for Windows 7 and does not work.

    I can tell it that the appropriate driver and where can I download it?

    Thank you!

    Hello

    What do you mean exactly by did not recognize me?
    What exactly happens if you start the installation?

    Driver Toshiba EU page provides 3 G driver Ericsson 8.1 victory and this driver works for sure!

    You should be able to download the package 3gdrv - 20131021133141.zip
    This package contains the TC00569300A.exe file.
    It is also a package, so you should be able to unpack this TC00569300A.exe by right-clicking on the file and choosing the option: extract or unpack here. I use the WinRAR tool to unzip the zipped packages.
    After the exe was unzipped, you will see the setup.exe.
    Simply run this setup.exe to start the installation.

    In Device Manager, you should be able to see the 3G device/module.
    Also, you should be able to install the driver in Device Manager by using the Advanced installation procedure.

    Here the direct link to the 3G driver
    http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20131021133141.zip

  • Portege Z930 - USB3.0 works as USB 2.0 after installing Win 7

    Hello world

    After uninstalling Win8 and installation of Win 7 (all the downloaded drivers on this site) USB3.0 work as USB2.0 (speed).

    And I see 1 unknown device in device like USB controller Manager.
    Install the driver a few times but without result.

    What this may be?

    Hello

    Have you installed the USB 3.0 driver that is on the page of the Toshiba UE driver?
    Do this!

    This driver provides support USB3.0 to your system

  • Portege Z930 cannot start with installed RAM module

    My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

    If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

    The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

    This is the only problem I have with this computer, but it's strange.

    I updated the BIOS to the latest version and the problem is not resolved.

    I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

    Any idea on this problem of strage?

    Kind regards
    Lito.

    I guess you used bad RAM or not fully compatible modules.
    It's the only plausible explanation.

    I recommend you to order the RAM modules recommended by Toshiba that are:

    4 GB DDR3 - 1600 PA5037U-1M4G

    2 GB DDR3 - 1600 PA5037U-1M2G

  • Tecra S1 - USB ports (all) and card reader does not

    Hello

    Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

    Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

    See you soon

    Hello

    Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
    In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

    Good bye

  • Portege Z30 - smart card reader does not work

    Hi, I just got my new Portege Z30 a few days ago.
    I try to use the card reader chip for my Spanish ID (DNIe) and seems to not work.
    When I insert the card as stated in the users manual, nothing happens.
    I have to player of SC "actuvate" somehow?

    (DNIe needs a compatible with ISO7816 SC reader, as one installed in my laptop seems to be)

    Usually you should not activate anything. Check the status of card reader in Device Manager please. There is everything OK?

    Make sure that you use a compatible card and it is inserted correctly.

  • Portege R500 - fingerprint reader and SD card reader does not work

    Hello

    I hope someone can help me.

    I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

    I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

    If everything works fine, except the fingerprint reader and the sd card slot.

    Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

    SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
    The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

    There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

    The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

    Thanks in advance,

    Michael (Germany)

    Thanks for the feedback second
    By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

    Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

    By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

    I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

  • Portege R500: Card reader SD and ODD do not work - drivers needed

    I have laptop portege R500, product number: PPR50E-04X04WCE.

    last year, I changed the operating system and installed windows 7.
    Since then, I can't use the dvd drive or the sd card reader.
    And the control panel it apears two unknown devices, but I can´t find the controllers for these.

    What can I do to fix this?

    I assume you found unknown devices in Device Manager.
    Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
    Here you can find instructions how to identify the unknown devices.

    I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

    Check it out please and let us know if you still have the same problem.

  • SD card reader will not work (code 10) on Portege

    Problems with my toshiba portege.

    When I put a card in the reader, plug n play sound just so he recognizes her. but then, nothing appears, something about an error code 10 showing he cannot start.

    is it possible to fix it?

    Code 10 means generally impossible to start the device.
    This may have different reasons. First, the driver has not been installed correctly or there is something wrong with the hardware.

    What you can do is refreshing to the SD card driver.
    Please go to Device Manager, check the State of SD card reader and use the option Update or reinstall the driver.
    The driver must be placed on the page Web of Toshiba. I hope. :|

    Alternatively, you can remove this device from the Device Manager, and after that restart the CD device should be recognized again.

  • Portege R500 - internal SD card reader not working not

    Internal SD card reader does not. When I insert the SD card, beep for laptop, but SD card nothing...
    At the hardware level manager is the card reader SD with yellow exclamation point!
    I have test the 4 cards of 128 MB, 512 MB, a two 1 GB cards...

    Any idea?

    I have not had a problem similar, but only with normal SD, SDHC cards no problem

Maybe you are looking for

  • Why my app crashes when in the dialer?

    I recently had a few crashes at reception or to make a call on my motorcycle g xt1032. I get a pop up saying unfortunately "contacts ceased." I am still able to make the call, but the pop up still until I press OK. Its really annoying that I have to

  • The task bar is white and an older version of windows to start

    Hello, for a late birthday present, I got my laptop used uncles. Its a compaq laptop and tinted. everything worked fine until when I arrived one night, my taskbar was suddenly white and the Start button looks like a very old version of Windows. I tri

  • HP OfficeJet 8600 and Custom paper sizes

    I have a HP OfficeJet 8600 for 2 years now, and I've never had a problem with it until today. I bought a few cards with inserts that I can print on, however, because it is a custom size, I can't print on it. The printer has no option to set a custom

  • Clipboard history

    How to recover a prior of the Clipboard information if I stored new information in the Clipboard by mistake?

  • software update error

    I'm trying to update an illustration of the company software and I got the message: Socket Error #0 Anyone know what this means?