Portege Z930 - white screen in question

When I turn on the laptop, the screen goes white and I can't do anything. I tried to plug it into an external monitor and drain the battery no luck

What is a defective unit?

What happen when you use the external monitor?
You don't see anything on the screen?

Tags: Toshiba

Similar Questions

  • Portege Z930 - white screen at startup

    My Z930 screen is empty at the start. The cursor can be seen when is moved around the screen, but there is no
    background a screen empty. stop holding the Start button / stop does not seem to work and the DSS led flashes slowly. When you open the lid of that unit starts automaticlly displays white screen and the cursor.

    I'm a computer completely illiterate, but if anyone can help me in words laymans terms, it will be a great help

    > now the button stop / stop does not seem to work

    That s is really bad.
    Due to Toshiba power button on document - http://aps2.toshiba-tro.de/kb0/FAQ3500560002R01.htm - should have the double function.
    Unplug the power plug and press and hold the power button / stop. I think the laptop must be turned off after a few seconds.

    Are you able to turn off your laptop somehow?
    Can you please elaborate on this subject? Since when did you notice this?
    Have you done something before your laptop started acting in this way?

  • Portege R100 - white screen at startup

    Hi, hope someone can guide me in the right direction

    I have a portable protected R100.

    When I start the power turns on and the display flashes briefly in action but then stays black. The drive still works and loads the operating system, but I can't get the screen to show anything.

    Thank you

    Hi JFarr29,

    This means that you can see an image on an external monitor and only the screen internal isn t working properly, no?

    Well, in this case it might be the FL inverter or view itself as the REGULARITY of an authorized service provider if you are not familiar with the disassembly of the laptop.
    Do you know how to contact the guys?

  • Portege Z930 - question of Toshiba Recovery Media Creator

    Hello
    I have a toshiba portege z930 pt234e with Windows 7 Professional
    I have connected the external optical drive and has worked fine
    But when I installed the Toshiba Recovery Media Creator, the external optical drive disappeared
    When I open the box drive HARD Toshiba Recovery Media Creator, shows, no. recovery!
    I want to do a system recovery disc

    Hello

    The Recovery Media Creator is a tool of Toshiba which requires Toshiba image files to create the recovery disk. The image files are placed on a different partition called recovery of HARD drive partition.

    If the HARD drive has been changed or deleted this partition, the recovery media creator will not be able to find image files and you will not be able to create this disc.

    So my question is: you reinstall Windows 7 at your own hand? Did you change the HARD drive in the past?

  • Re: Sore eyes using Portege Z930 screen

    Hi all

    After appr. 30 min of work with my Portege Z930 I get the pain in my eyes and, later, headache.
    I can't just work properly with him.

    I tried all known by me options to configure the graphic display, Intel utilities and a Windows, change text size and so on, but to no avail.
    Text is a little fuzzy looking.

    I'm 12 years old laptop user, changed a lot of it and it's my first laptop with such a poor quality screen.
    Or is it a default and I should ask replace the matrix?

    Appreciate all the advice of many,
    Sergey

    Hello

    The device supports a common 13.3 "(HD) TFT color LCD."
    The max resolution is 1366 x 768.

    So I can't find big differences between this screen and others, used in other books

    Of course 13.3 is not really a big screen I prefer notebook with a screen size of 15-17.
    The 13.3 is too small for me

    I don't know... maybe there is something wrong with the LCD display... then maybe you should ask a service provider to verify the part... but this is just my personal opinion...

  • Portege Z930-10F - broken the screen twice in just 3 months

    I am user of laptop for 12 years. On 30 July, I bought my Portege Z930, thinking it was my best decision for many years.
    Less than a month later, at the opening of the screen during a flight, it s simply broken the screen, it is impossible to use the most.

    After sending to the official service in Spain, told me it was my fault and bad usage, so I had to pay more than 300 ($ 400). I told the customer, explaining about their excessive flexible top and rigid screen support and nothing again.
    It's only my fault.

    Last October, 11 again at the opening of my top, this time by using a label of band fixed by myself, in order to avoid the mixing of the screen, it scraped again.

    I can't afford it is only my fault, but it's a real design problem, for the lighter ultrabook in the market.

    If someone can give me the support for this serious problem, it will be very appreciated

    Hello

    It's really amazing story and I think you're the first person who says something like that.
    Portege Z930 has long been on the market and I have never heard of these issues.
    Please don t get me wrong, but it is really strange that happening already three times.

    I saw this machine and all the construction seems pretty stable for me. When you open the screen, I hope that your fingers are placed in the middle of the display panel and not by the side. The pressure on the hinges of the screen coverage must be the same. If you want to display on one side only, I can imagine that something like this can happen, but it shouldn't t.

    Portege series is one of the best portable Toshiba s business so I think that the Toshiba and technicians designer take very seriously and I can't imagine that they make this mistake of design.

    I still have some old Portege 2000 and it was lighter for laptop at this time with very sensitive display and the hinges of the screen cover, but there is no problem at all.

    We can discuss here everyday and I really hope that someone with the Portege even can post experiences, but all of that, that you try to clarify with Toshiba. Be careful when you open and hold the display in the Middle only.

    Good luck.

  • Portege Z930 - FN keys issue - showing no no menu on screen

    Hello

    I have toshiba portege Z930 and my function keys worked until I installed YAC (yet another cleanser) to get rid of some malware, which worked, but the problem is that even after uninstalation, function keys is broken:

    FN + y/z which should highlith the keyboard does not work (I have installed what is called the "function key" for now, that works as well with the FN 1, 3 FN, FN 4 and 3 + 4 to volume)

    but others simply does not work:
    FN + ESC (mute)
    FN + F2 (eco mode)
    FN + F5 (control switch)
    FN + F8 (wifi/bluetooth switch
    FN + F9 - 12

    Could someone point me to good drivers for this? Thank you very much
    Karolina

    What Windows system is installed?
    In the case of Windows 7, you need to install Toshiba Value added Package
    In the case of 8.1 to win, you need to install the Toshiba system parameters.

    But be careful: some FN key features depends on the 3rd software. For example, you will not be able to use the FN + F2 if eco mode ECO Utility isn't installed.

    But why n t give you the OS at the beginning point of time until you have used the cleaning tool?

  • Pavilion dv6 questions white screen).

    A problem in class with the HP Pavilion laptops, white screen issues. Note right on my pavilion dv6 1 year that a black screen is natural every day. Here what I did to correct the current problem reinstall windows 7, install all updates, update BIOS and chipset and the same problem occurs every day. Anyone else have any suggestions what could be the problem? Any help would be greatly appreciated.

    Thanks in advance.

    Mike

    Hi David,

    I try now technical scanning it did not help. It gets worse! I'll send the laptop to HP for repair. It a good thing that I got a year extra 1 warranty when I bought this laptop. I was checking the sites online and cards mothers cost between $ 200.00 to $ 300.00. I also have problems with this laptop.

    Thanks for your help.

    Mike

  • Question of Simulator: white screen off center instead of application

    Hello

    I'm new on the BlackBerry community, the development of BlackBerry et al. Today, I downloaded the SDK to test the Tablet Simulator 0.9.2 but I already spent several hours trying to get something to run without success.

    The Simulator is installed without any apparent problems. I have read the forums today and I had none of the problems that others have mentioned, as a screen freezes or problems during startup.

    I use a trial version of VMWare Fusion 3.1.2 on Mac OS X 10.6.6.

    I don't have Adobe Flash Builder, so I use TextWrangler. I wrote an applescript script which, during the recording of my actionscript file, called a perl script (I know, sounds redundant, but it works) and fact the compilation for me as posted by Taylor Byrnes (amxmlc, blackberry-airpackager). I'm able to talk to the simulator that my output from compilation shows any errors (as far as I know), but my application appear in the Simulator without the icon that I have provided.

    When the application is started, all I get is a white screen off-center without content about it.

    I've also compiled the HelloWorld example provided. What I received was another app in the Simulator with the default icon that does exactly the same thing: a biased white screen. Whenever I have recompile a script with minor changes, the icons in the Simulator flash for a millisecond, and then I get the same off white screen.

    Someone knows something like that? Clues?

    There is obviously something I have to hurt. I can put my arguments to command-line and script if that helps. I tested my swf file in the Flash Player application and it shows. All what I have there is a red dwarf with a TextField on the top.

    Sorry for the comments and thanks for any help, you can provide.

    Daniel

    Are there spaces in folder names anywhere in the path to your project on your computer?  If so try to migrate your development to a folder that has no space in any folder named everywhere in its path.  Maybe it's not the cause of the problem, but in all cases, you should remove it as a possibility.  Windows users are discouraged to use the directory C:\Documents and Settings typical for Playbook dirs project.

    The other thing that went off to the top of some people using versions of command line is picky how the tools are.  In your command line, try using the - C option, and make sure it's between - package .bar and installApp -:

    I.e. instead of:

    blackberry-airpackager -package HelloWorld.bar -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
    

    follow these steps:

    blackberry-airpackager -package HelloWorld.bar -C [YOUR PROJECT WORKING DIR} -installApp -launchApp HelloWorld-app.xml HelloWorld.swf [ICON FILE NAME] -device [PLAYBOOK IP ADDRESS] -password [SIMULATOR PASSWORD]
    

    The airpackager in the SDK 0.9.1 was picky about the order of the command line options.  I'm still not on 0.9.2 but see nothing in the notes to having fixed them thereon.

    Edit: Note; I've never had a center off white screen w/all of my command line compiling adventures, but before I got the mantra of the 'proper' command line, I got apps that showed a splash screen and then just went.  I'm on Windows (XP SP3), btw.

  • Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

    Hello

    I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

    I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

    I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

    I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

    See you soon

    Usually start up to a blank screen without the Apple Logo, may report one of the following:

    • Hardware failure
    • Boot drive is not recognized as valid and updated updated
    • OS X essential software is missing, hurt moved or renamed or corrupt
    • A firmware update is necessary

    No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

    Alternatively, you can try holding down the C key to try to boot from the external drive.

    If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

    Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

  • 3rd generation ipod white screen

    I know it's old, but working well... so far.  White screen.  It is recognized by itunes when plugged into the computer.  Restored successfully on the itunes screen, always white.  Tried the fix with holding home and power button.  Tried to hold the House, volume and power.  Screen remains white.

    My question - is all hope gone and I must finally remove this ipod?  It's been great and it's a sudden death - hard to see it go.

    Thanks for any help...

    The 3rd gen iPod "classic" has a great sound.  If you tried to do a restore already, its likely to be a hardware problem, unfortunately.

    These older iPods are easier to repair because they are assembled from items separated and not so integrated and miniaturized.  My work 3rd generation iPod was reassembled broken iPods that I bought on eBay, by swapping pieces.  The screen is not the thing that is broken, most of the time.  If you are somewhat technically inclined, you can remedy.  You can post back for more information.

  • iMac 8.1 White Screen of Death

    Before I launch into history, here are some of the relevant features of my computer. I have an iMac 8.1 (2008 model) with a processor clocked at 2.66 DC2, 2 GB of RAM and a hard disk of 1 TB with three partitions. The main (about 640 GB) ran 10.11, the second a (32) snow leopard and the rest it has been implemented with Windows 7. This configuration worked well enough (if a little cludgily) for some time, but the other day, things came to a head.

    It has a bit of history history, please bear with me.

    Monday, after the computer has been awkwardly slow with no application, I thought to reinstall El Capitan to see if that would help. After the installation failed, I ran disk utility on the main partition to see what he would say. After a brief inspection, he said that it was a problem he couldn't solve, recommended making sure that my data has been backed up and clear. The Snow Leopard partition, however, seemed fine. Somewhere along the line I also gave Techtool Pro 8 a spin; It seems to indicate that most of the things associated with non-partition were very well, but found that the hard drive (in general) has failed to test temperature.

    In any case, I boot in Snow Leopard, I guess to see if the old version of disk utility would have a bit more luck (this may sound stupid, but I confess I have a lingering distrust of the latest iteration of this software). As expected, he did not progress. I even ran DiskWarrior 4, and he says that the partition was shot. Somewhere along the way, I had disassembled the main partition for a reason, and after not being able to get him back for some time (and getting only ReadOnly when she didn't come back), I myself resigned and the likelihood that the partition was shot. We ran by Best Buy and picked up a 1 TB external drive (which I never had before, as stupid as it sounds; "I guess I never realized to cheap ways they had obtained). I spend a night using carbon copy to backup my important data and when I'm done moving things on the next day morning, delete this partition. So far so good. I reinstall El Capitan without any hitch and spend a day or two, transfer of information on the 'new '. I also make sure to configure the new disk as a time Machine, get all my data saved on it.

    Things seem to be fine, and I'm starting to get back to my daily routine. However, this morning, after the connection and use it for a little while, the entire screen changes abruptly a very light grey/white color and no unresponsive. I understand that nothing is happening, stop and restart the power. The screen remains white. The slider appears, but nothing big happens else. At some point (I'm afraid I don't remember if it's on this first boot or one of the few later), a folder with a flashing question mark appears (this never appeared, however, on one or two startups). I try different things: reset PRAM (which at least brought the sound chime, who had kept silent, back), reset the SMC and boot into safe mode, a disc hard my choice with the Option key pressed, or since the Snow Leopard DVD. When he answered the optionkey down initially, it would shoot the cursor and screen as if he was going to offer me different drives, but nothing ever came, not even the external drive. After further start attempts, he stopped to show anything, even the cursor.

    I have the external drive disconnected right now. When you start the computer, a white screen comes up and then nothing else seems to happen, no matter what key combos are pressed.

    It was for some time ago, but I thought it would be useful to mention that we sometimes have blackouts here. After such an event, old computer power supply burned and had to be replaced. Since that time, however, everything seemed to work pretty well.

    I looked around, discussions and others to try to see if I could find a similar experience, but as it is I'm quite puzzled. The only thing I have not tried is opened and unplug the hard drive as suggested by an intern, to see if she might try to find other media to boot from.

    I thought I would ask here to see if he has any advice this community had to offer before doing something drastic. Thanks for reading and your review.

    If you have the original install disc provided with the computer, run Apple Hardware Test Mode Extended 2 - 3 times back to back. If errors appear when you have confirmed a significant hardware problem the computer has to go repair. The reason to run AHT in Extended Mode what is complete, but it can miss errors during the first and even the second pass.

    However my guess is have some other hardware problem and you really takes them to a CENTER in your area to be diagnosed professionally.

  • Reset ends in white screen, no job options

    I have a MacBook pro 15 inch, start 2011 with always OSX Lion .on that it installed.

    Never did really of the software updates, since a few days ago. It was clearly a mistake. An orange, I got first screen, then white and blue. And after another implementation, it is even more possible to connect.

    I tried all the options people suggest online mode (shift) course, mode(cmd+r), vram(cmd+opt+p+r), only mode(cmd-s) and internet recovery mode recovery. (cmd + opt + r).  I continue to ending on a white screen just after the Apple logo.

    -Safe mode = never got in front of a white screen;

    -recovery mode = never got in front of a white screen;

    VRAM-= think it worked because the sound of the chimes was stronger after;

    -Single mode = Can get all the time; but sometimes blue with white letters, then the next restart custom works for sure.

    -Recovery Internet = Ethernet cable and the world appears but only managed to reach the second screen once.

    opt + D (material check says that there is no problem with my hardware)

    I managed to reach the login screen a few times with lots of fsck - fy and restarts... But quickly dropped again after the login. At each time it failed, the Apple logo was a blue tint and I managed to reach the login, the logo was gray.

    Yesterday, I managed to reinstall OS x Lion with restoration of the Internet, the first time I got to the screen with the options.

    I worked very well with a bit of Internet and Excel. Then I wanted to reach the Java Control Panel in system preferences to check if the problem was Java. It crashed.

    Managed to connect one more time and I tried to update Java in the browser instead of system preferences. It crashed. HARD.

    After restarting, no option no longer works with the exception of the screen in single mode; but the screen is blue with white letters, so I don't know if I'm able to reach the login screen more.

    I already tried many things and I'm afraid, I only make worse it.

    I think the problem is the Java framework or the video graphics drivers. Rather the software associated with that material, but I don't know more.

    Someone knows what to do?

    make an appointment at the genius Bar to be sure that you have these questions:

    https://www.Apple.com/support/MacBookPro-videoissues/

    Your Mac MUST meet all THE requirements of the program to cover. It must be in the correct date range and must be able to run the diagnosis of VST and fail to be covered by the program.

    Mac that don't meet ALL the requirements (such as Macs who cannot run anything) is generally considered a random failure.

    They are not trying to squeeze every penny from you like car dealerships. Apple wants you to be a customer happy, if possible. The store manager can have additional flexibility to allow outdoor program repairs or provide repair cost if you don't finish eligible under the program.

  • Start-up and white screen issue after updating to v10.11.5?

    I can't say 100% that my problems are related to the last update, but I thought I'd ask.

    I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

    Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

    1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

    2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

    3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

    4 computer at boot flashing out to a white screen then restart never

    Thanks for any help.

    Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

    The problems start when my wife logs in to his user account.

    Thought I would mention it.

    Any help/response would be appreciated.

  • When I return to the page of Google search results, need me a white screen of Google

    For example, I click on a link after doing a search on Google, then I decide to go back and check one
    the other links. When I return to the place to see my screen of Google results, I was white
    Screen of Google. So I put my search terms in all over world. This does not happen using
    Internet Explorer. Thanks for any help

    I have the same problem and looked for help on the Mozillazine.org site. Didn't help either, but I found that when you get the blank screen, click REFRESH, get the desired page.

    Another solution for this problem is available here: https://support.mozilla.org/questions/970863?page=2#answer-485663

    "Alternative" added as requested by jscher2000

Maybe you are looking for

  • Boning a Checksum

    Hi all If someone's feeling intelligent I have a puzzle to solve (I can pay in beer or congratulations) We have a need to create a message as each line below, but need to recreate the checksum. It emulates a piece of kit around 1984 based on a chip 8

  • On XP SP3 installation failure

    When I install the SP3 of XP, it fails and causes me to use the XP installation disc.  I tried 3 times to do an install ordinary of SP3 on XP and each time it fails and must use the installation disc.  I'm not on a network and Microsoft Update tells

  • Error 646, updates do not install

    The update continues to tell me I have 9 new updates to install, but everytime I go to install, they do NOT. Here is information about each update. These updates started fails on 10/18/2009 and have continued to do so. I would really like to know wht

  • How can I change the default file locations in the dialog box "Save as" in Windows 7 x 64?

    I tried all the tips and tricks of WinXP, but they do not seem to work in Win7. Does anyone know how to change the location of the default files for the dialog box "Save as" in Win7?

  • Recover the laptop help Windows 8

    I bought an Asus laptop a few months ago and it was working fine. One day when I started he went in 'self-healing' mode and then I came across a blue screen with the error 0xc000185 code and it says that I have to use my recovery tools or the install