Ports USB Host not recognized ESX4i of devices

I have a new HP dl 360 G6, I installed the ESX4i update1 custom hypervisor HP with the latest patches of ´s, HW USB ports are activated by the server BIOS and I create a new machine virtual Windows Server 2008 x 32 with allows USB ports, USB ports are shown by windows 2008, but when I plug a peripheral USB is not recognized I need to plug a USB 72 GB DAT, I tried also with a USB and no job. All USB devices are 2.0.

Yes, you can redirect USB via VMDirectPath, but you will lose VMotion, HA, instant = backup. I had to recoomend a look at USB over IP as Digi AnywhereUSB

---

MCSA, MCTS, VCP, VMware vExpert 2009

http://blog.vadmin.ru

Tags: VMware

Similar Questions

  • Ports USB suddenly not recognized

    I have a laptop with windows Vista on it and it came with 3 USB ports.  After doing some cleanup, defrag and that you back up all of a sudden none of them are recognized.  They appear in the Device Manager but not in the "computer" section  The wireless mouse does not work and our Ipod is not recognized, although it will load.  We did all kinds of update.  Have not uninstalled and reinstalled material... bit nervous about it and don't really know how to do it.  Good instructions on how to do it would be useful if that's what we need to do.  What should we do?

    Any help is appreciated.

    Hello

    Try a system restore to where the USB ports worked.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    ===================================

    If necessary:

    Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

    For a laptop, using a real computer shop (no leeks and glances at a Best Buy or any other
    Department stores) or system manufacturer support.

    ------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for your devices (can have
    zero or more than one) and top - right click UNINSTALL.

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
    as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
    Is there.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

    Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

    Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

  • Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

    My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

    Hello

    1. have you made changes on the computer before this problem?
    2. What is the model of the keyboard?
    3. are you an error message or error code?
    4. which version of the Windows operating system is installed on your computer?

    I suggest you to consult the following Microsoft article and check if it helps.

    On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

    Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

    Keyboard and Microsoft mouse refer:

    Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Reference:

    Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

  • After upgrading to itunes 12.5.2.1 my iphone is not recognized as a device in itunes

    After that I upgraded to itunes 12.5.2.1 and IOS 10 September 14 my 6s iphone is not recognized as a device if I sync my PC with Windows 10 on it.

    Help, please.

    Any body else with the same problem?

  • Tecra M3 and Advanced Port Replicator III: not recognized as docking station

    Hello!

    Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

    Is TI WHEREAS behavior?
    Thank you in advance.

    Hello

    You reinstall the unit with the recovery CD?
    As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
    Well, I recommend to reinstall this driver and utility.
    Perhaps the installation of the new driver will solve this problem.

    Good bye

  • niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

    Hi all!

    I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

    Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

    I also downloaded example c# measure DC Voltsto compare with my request.

    Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

    DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

    I guess it is function of device PXI!

    I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

    NOR-DAQmx 8.9.5

    NOR-DMM 3.0.1

    NI-VISA 4.6.1

    NOR-MAX 4.6.2f1

    Roberto

    Hello Robson,

    Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

    KB 33A96PCW: receive error-1074118656 when running OR DMM screws

    Let me know if this might help.

    Best regards.

  • USB keyboard not recognized on USB 2.0 Ports

    Hello, I have a dell inspiron 3521.

    It has:

    2 USB 2.0 ports.

    2 USB 3.0 ports.

    Whenever I connect my USB keyboard to any port 2.0, it is not recognized.

    Instead, it is shown in the unknown devices section.

    Earlier, when I had problems with the host VMWare keyboard driver, I had disabled, uninstalled, deleted ad form pilot system via the Device Manager.

    Then the keyboard worked until you restart.

    Now, it is not recognized on all USB 2.0 ports, but works perfectly in a USB 3.0 port.

    I tried the following:

    Uninstalled the USB drivers and restarted the system.

    Tried to update the driver software (all Device Manager).

    Tried with another keyboard, but it does not work either.

    What should I do next?

    Please suggest me some solutions.

    Hi AdityaMudgerikar123,

    I would recommend that you consult article Troubleshooting wired keyboards that do not or evil characters such.

    Thank you!

  • external USB drives not recognized under xp pro 64

    I bought a genuine version of XP Pro 64 to load on my computer and because Win 7 froze with drivers nVidia graphics.

    When I plug a recently bought Seagate Goflex or one of the new Western Digital external hard drives, they are not recognized.

    They do not show on my computer or disk management at all.

    They appear in Device Manager with a yellow question mark big under 'other devices '.

    I right click on the hard drive in the Device Manager to update the driver, and it always fails.

    Before ask you, these USB drives work perfectly on my other XP Home 32 System. The cables are good.

    I tried different ports, front and rear... no good.

    My system XP 64 Prp is updated w/Windows update and software chip to the motherboard.

    Strangely, I have a hard drive WD Passport USB 500 Gb one-year-old that works fine on XP 64 system.

    WD technicians say that I am the only one with this problem. PlugNPlay needs no driver, what do say.

    I also have IDE/SATA USB cable w / the power cable, I use to connect my old internal drives.

    Works fine on the XP Home 32, but I get the error "USB to ATA/ATAPI Bridge" in the device with the 64-bit System Manager.

    Yes these devices are all "turned on."

    Something is missing on the XP 64 system.

    Help is very appreciated.

    Been looking for a solution for a week now.

    Thank you.

    Hello

    See the following articles that may help you resolve this problem.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
    http://support.Microsoft.com/kb/925196
    Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
    http://support.Microsoft.com/kb/314634

  • Peripheral USB are not recognized

    Original title: USB drivers

    My mouse, printer and mobile device are not recognized or functioning when plugged into the USB ports. They seem to be fed, but that's all. When I run MASTS (Microsoft Automated Troubleshooting Service), it scans and concludes that "material changes may not have been detected. He said he applied a fix but still nothing works.

    Try to reinstall the chipset drivers of your PC manufacturer or the manufacturer of the motherboard, if a generic PC

  • USB stick not recognized even on other computers

    Hey-

    A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

    Hello

    If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
    go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

    How to format the USB drive and memory with NTFS
    http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

    Format a Flash DRIVE with the NTFS file system
    http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • OTG not recognized by iPhone device

    I use iPhone 6 s. so I bought the key USB OTG NK890 (32 GB) model. This device works correctly with i-FlashDevice until recently. but now, it is not recognized by my iPhone. He'll show a massage error as shown in the picture.

    Pls comment what is the error of this & how do I fix this? ???

    My iPhone 6 s

    iOS 9.3.4

    Hello

    Apple recommends to use only Apple original accessories or accessories of third party Apple has certified under the program of the IFM. Using an accessory of uncertified lightning can cause problems with including your iPhone becomes damaged.

    Accessories from third-party certified for iPhone come with the logo "Made for iPhone" on the product and/or packaging.

    Also note that the Apple warranty does not cover damage caused by the use of your iPhone with a third-party product that does not meet the specifications of Apple.

    More information:

    Identify the fakes or not certified Lightning - Apple Support connector accessories

  • USB stick not recognized by the computer. Have tried all the options I can think about.

    Very well.  I have a S-Mini Patriot 32 GB flash drive that does not recognize my HP Slimline 400-434 Windows 8.1. In my view, he acknowledged once and has refused to do since. My laptop (Windows 7 Toshiba) recognizes very well.

    All other devices USB function perfectly on this computer. USB hub mouse, keyboard, USB, cable Apple iPhone.

    1. I tried to unplug all other USB devices before trying this one. IN CASE OF FAILURE

    2. I went to device management and the USB does not appear in the list. IN CASE OF FAILURE

    3. I uninstalled the USB root hubs and restarted the computer. IN CASE OF FAILURE

    4. I tried to plug in the USB ports on the back that plug directly into the motherboard. IN CASE OF FAILURE

    5. I have updated the drivers, and have been unable to find a update of the BIOS as the link on the HP download site and told that it is incompatible to my computer. IN CASE OF FAILURE

    .. then what the hell gorram bloody I do now?

    Good and the most ridiculous way, I never solved a technical problem...

    Failed to insert the USB flash in the port. She has to insert slowly, so that the contacts are aligned.

    I found it trying to connect to it in my USB hub and noting that the witness red light was going on and outside that I inserted the USB key, flicker on as I inserted it there and then off once it is all the way in.

    Weird. But good. It works now.

  • USB-6009 not recognized after the blue screen of death

    I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

    I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

    The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

  • Peripheral USB is not recognized (external hard drive)

    I have a western digital external drive who worked originally on windows XP Edition family, unfortunately this computer crashed and had to reinstall everything. After ending, I went to retrieve some data off the drive and it keeps giving error usb device not recognized. I looked on a lot of different 'solutions' to nothing does not. I can connect to other computers running the same operating system and he shoots very well if it is not the drive. It seems as if a driver is missing, but I checked with Western Digital, and they say the questions is a mistake of operating system, all updates and service packs have been installed. Ive tried all online of the easy solution like just unplug the computer and the drive and restart, remove and reinstall the drivers in the OS System. In Device Manager its reports as an unknown device under the USB bus controllers section. I need to get this to work by car no matter either if it needs to be reformatted or repartitioned, but I can't even pull up on the drive to reformat so don't know what to do. any suggestions are greatly appreciated.

    The problems detected as "unknown".

    http://support.Microsoft.com/kb/314464

    WD Firmware Updater. (May be necessary since you have reinstalled the OS)

    http://www.wdc.com/wdproducts/wdsmartwareupdate/?ID=wdfMyPassport&OS=win&FW=1

Maybe you are looking for

  • How can I buy the iPhone Unlocked 7?

    I'm in the United States at the moment and I have to go back to my country soon and I want to buy the iPhone 7 from the site of the apple store, but I can't choose the sim-free option, I have to choose between the 4 carriers as the only means of paym

  • How can I find the tools of Firefox button?

    I look for the 'TOOLS' button, I get nothing that tells me where to find

  • Panel close? Event causes the front panel for not responding

    I am trying to create a simple program. Some time ago loop that generates random numbers, just so that I can see it is running. An "Exit" button is connected to an output of the while loop Terminal. The event structure is also in this loop, which int

  • Download Windows XP Professional SP3 update installers?

    I have an old computer running Windows XP Professional SP, and he needs an Ethernet card. Unfortunately, I don't have enough money to buy one for her. Is it possible that I can download all the updates that are released for it and put them on a drive

  • Unknown folders in Documents and Settings

    Here is a link to imageshack for two .jpeg files. http://ImageShack.us/photo/my-images/13/fdrivedocumentsandsetti.jpg/ and http://imageshack.us/photo/my-images/29/documentsandsettings112.jpg/ Both are Documents of XP Home and settings folder, one is