Positioing on Satellite L650-1MC USB port

Similar Questions

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers

• RAM is not recognized on Satellite L650-1MC

  Hello guys

  I have a Toshiba Satellite L650-1MC with an i5 480M CPU and 4 GB DDR3 PC3 - 10600 (2 x 2 GB modules). Today, I got a 4 GB of DDR3 PC3-8500 module to upgrade the RAM 6 GB. I put this new module in and he was not recognized, perhaps because it was PC3-* 8500 * not * 10600 * like the original other two modules.

  However, when I tried to put one of the modules of 2 GB DDR3 PC3 10600 original in once again, he was not recognized or the other! I then left the second empty slot, with nothing in it, and he acknowledged the 1 module 2 GB in there. Do you intend the PC3-8500 module "corrupt" the memory slot, or is it not positioned properly, as seems to be slotted into a fine; It will not move.

  I would really appreciate your help

  Tom

  Hello Tom

  There must be a compatibility problem. Forum is filled with similar reports. You should only use compatible and tested modules.
  I highly recommend to use modules from Kingston.
  Compatible RAM for your laptop model you can find on http://www.ec.kingston.com/ecom/configurator_new/lines.asp?root=uk&LinkBack=http :// www.kingston.com/ukroot&Manufacturer=tos&search_type=

  If you need assistance, you are prompted.

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.

• Satellite L650 - eSATA/USB combo port does not work

  I donot have esata devices. but as I know that I can still use this combo port to connect usb devices. However, I have tried mu esternal hd (2.5') and USB receiver usb (for mouse and keyboard) and some other usb for iphone and sgs2 cables. None of them worked!

  can someone help me with this problem? is this a hardware or just problem that I missed something.

  Help, please.

  Hi alwayseric,

  What operating system do you use?
  Have you checked for yellow exclamation marks Device Manager?
  If you connect USB devices to the normal USB port it works?

  I would recommend a chipset driver. It's worth a try, and you can download it here:
  http://EU.computers.Toshiba-Europe.com

• Satellite Pro C650 - USB ports now DEAD

  Over the past 48 hours have really struggled to get my USB ports work,
  Toshiba SATELLITE PRO C650 lappy running W7... At only 2 usb ports.

  A couple of days, I bought a new stick of memory... 16 GB SanDisk Cruzer Blade... He stuck in lappy and anything that happened outside my mouse attached wireless stopped working.
  Since then, the ports were completely dead. (stick now appears on anotherPC)
  That's what I did so far, after a search web solutions thro...

  Device Manager display ports everything is OK with no exclamations...
  When I insert any USB device... no sound confirmation of PC and Dev Mgr flinch...
  Tried to uninstall port/hubs and leaving W7 re-install them using... Still dead...
  Trying to remove battery and power sector during the centuries, then re start off the power... Still dead...

  I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs.
  I really want to be sure ive tried everything before you do this.

  Could I have really damaged the MB. ??
  I now nowhere so fast if theres anyone out there has any suggestions please shout...

  > I think that my last resort looking for a factory system by default re install... but one have a mountain of things astro which must be saved and cannot be done through many many discs

  Even if it s really painful to get everything installed it again, I would recommend to recover the laptop using the Toshiba recovery disc or HARD drive recovery.

  > Could I have really damaged the MB. ??
  Well, it's hard to say before trying the recovery procedure.
  If the USB ports are not working after using the recovery disk (or HDD recovery), then of course: the mobo may be affected, therefore, in my view, the laptop must be set to the factory settings.

• Satellite L310 - damaged USB port

  Hai, I have of me sia, I saw a model Asia Satellite L310 USB pin damaged inside.
  Which is I confirm not used to bad use by my own, & my friend recently purchase a new model problem Satellite M300 also face the same thing as mine. The service center in my country rejected my claim because they blame it on my own abuse.

  Could you help us to investigate the following case please? urgent, your help will be very appreciated.

  > have a model of Asia Satellite L310 damaged the USB pin inside. Which is I confirm not used to bad use by my own, & my friend recently purchase a new model problem Satellite M300 also faced the same as mine
  That s very strange and I cannot believe that
  I mean if the PIN to USB ports was broken on the first day of purchase, then why you didn't visit your dealer and asked the replacement of the laptop?

  However, I had 2 portable satellite in the past. Series not Asian but portable European Satellite. Now, I m using a satellite A210 and all USB ports is OK on all my series.

  You must have simply no chance cause

• Satellite C660 - two USB Ports without function (bad connection)

  Hello, sorry for the worst English.
  Historically, the touchpad of my Satellite C660-220 used without operation, worked with a mouse of radio. Now, two usb ports can only be used under certain conditions. Can I replace the connections for this part (motherboard / motherboard) for example, a computer used toshiba laptop? Where can I read, one of which models the parts required are the same as well?

  Best regards from the Germany

  Bert

  Hi Bert

  I guess for you that it is quite simple. Problem is that this repair is not supported, and all we can try it on its own, including all the risks of damaging something.
  > Where can I read, one of which models the parts required are the same as well?
  This kind of document is not and if it has information that is not for public use, but for only authorized services.

  Theoretically, you can find the same mainboard with damage CPU or GPU and use parts from there.
  Believe me it is not easy to give you some good advice on this subject.
  Out of curiosity, but you have some experience with these things?

• Satellite M30-106: USB Ports not working not

  Hello.

  I have a problem with my Satellite M30-106. One day, the system froze (Windows XP with SP2) during the passage of the machine off. I was forced to keep the button "power" for a while in order to close the system. However, since all 3 USB ports do not work.

  The system does not recognize the "" them. I can't see in Device Manager. I tried to reinstall the system, but it did not help.

  Can someone help me, pelase =)

  Hello

  It looks like a hardware problem. At whatever it is connected to the USB ports at the time? Could you check the USB ports visually and see if they are damaged or wobbly. It is a bit of a long shot, but you may have a short circuit decision and which could disable the USB.
  If the motherboard is damaged then outside fixing/replace your only option would be a PCMCIA USB card, they are not expensive.

  Best regards
  Swarvek

• Satellite L650D-103 - USB ports do not work

  Hello

  I have a Satellite L650D-103 with usb ports not working only (no mouse, no printer) of a windows update 7.
  I tried a system restore, but it has not solved the problem.

  When I check the generic system card realtek controller is disabled.

  What can I do?
  Thank you for your help

  + The message was edited: post has been translated.

  Hello

  I recommend you remove the hubs and USB controllers in Device Manager.
  Expand the domain controller USB (in Device Manager), choose the USB devices - root - hub USB enhanced host controller, and press DELETE. This must be done for all devices listed there.

  Satellite L650D-103 was equipped with an AMD chipset.
  The chipset driver is part of the ATI display driver and that's why I recommend you to reinstall the ATI display driver again.

  Finally, restart the laptop and test the functionality of USB port.

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• Satellite 1900-303 USB port not working - USB hub?

  Hello. Deploy a Satellite 1900-303 with two USB ports. One of the ports stopped working. I guess it's permanently broken. Just browse the site, it seems that the easient of thing to do would be to get a Port Replicator - one of them:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=UK&selCategory=4697&o ldCategory = 4697 & OPTION_ID = 95631 & toshibaShop = true & t ab = 1 #1

  I wanted to know is it just to sink my remaining a USB port, so that I get 4 USB ports (and all others)? What USB speed I would get?

  Thank you!

  Rich

  Hello

  As far as I know the unit supports USB 1.1
  So I guess if you are using a USB hub external, USB ports work with USB 1.1 properties.
  Maximum data transfer should be 12 Mbps

• Re: Tight Satellite Pro A200 USB ports

  Hello

  I received my A200GE - 26Q Satellite Pro yesterday (yay!) and I was testing every bit of last night. The USB ports are extremely tight. I almost have the USB in the force and pull VERY hard to get it out. What develops these damage the ports/usb?

  Also, is there anything we can do about it? I don't think that Toshiba will change that because they work and therefore are not eligible to be fixed under the warranty.

  My DVD player is also quite noisy. Is this normal?

  Hope you can help!

  Help, please
  Thank you
  Edelweiss

  > I got my A200GE - 26Q Satellite Pro yesterday (yay!) and I was testing all the bits last night. The USB ports are extremely tight. I almost have the USB in the force and pull VERY hard to get it out. What develops these damage the ports/usb?
  Don t think that can damage anything, but if you connect or disconnect something and then be careful don't use force.

  > My DVD drive is also quite noisy. Is this normal?
  The CD/DVD drive is always a bit harder while working.
  I guess that there s nothing unusual.

  Best regards

• Satellite A200 - issue USB ports - failed to read the USB

  I have a Satellite A200 series - and when I insert a dongle in the USB Ports - nothing is read or seen when I go via explores.
  In this case for an external mouse or my USB storage - yet it will recognize my Ipod when I need to recharge the battery.

  All of the suggestions, I'll be very grateful.

  See you soon

  Li Li

  Hello

  First of all, it would be interesting to know if you are using the OS preinstalled Toshiba.
  Second, you must check the status of the USB controller in Device Manager.

  I recommend you to unplug all external USB devices to the laptop.
  Delete all the USB root hubs and Device Manager USB host controllers.
  Then restart the laptop and wait until Windows will reinstall all USB ports again.
  Then you can plug in a USB mouse or USB again.

  Check it out