position of the control

Similar Questions

• Position of the control is displayed differently on Windows XP and Win7

  When I created my application to run on Windows 7, all the controls were in the correct position. But when I ran my executable under Windows XP, changed position of some controls. Four controls are aligned to bottom when I created them.

  See the attached screenshots.

  Any suggestions?

  As others have pointed out, the fonts change between systems.  What works for me is the following:

  I added these lines in each file ' C:\Program Files (x 86) \National xxx\LabVIEW.ini "on my system (v7.1.1 thru 2015)

  appFont = "Tahoma" 13
  dialogFont = "Tahoma" 13
  systemFont = "Tahoma" 13
  FPFont = "Tahoma" 13
  BDFont = "Tahoma" 13

  I includes the execution of the VI attached as a 'generation of the post action"as part of the build process EXE.

  

  If you use based on a remote browser (IE, Firefox, Chrome) before panels then you will also find that you must set the default font in the browser to match.

  

  In Windows 7, at least, the other parameter that can affect the appearance of the GUI is located on the display of Windows Control Panel.   Any setting other than the Smaller/100% (usually 96 DPI) setting may cause certain text values to fill in their text boxes.

  

• Get the position of the control in the window of the façade

  Hello

  I have the window façade divided with dispatchers on several components. On a glass, I have a button (and an overlay window) I want to move programmatically at run time. I would like to get the position of the button according to the coordinate system of façade, but to my knowledge, no such property exists. I know that I can calculate the position if I calculate the position of each knife (or component) that is between the origin of the façade and the button, but it takes a lot of time if you have many such cases.

  Any ideas are appreciated.

  Andrej

  Try this

• Position of the mouse in a chain of control/indicator

  Hi all

  By using LabVIEW 2015 and would like to know if it is possible to do the following...

  I have a string with a paragraph or two of text.  In this text, certain words and phrases are highlighted (by different font color).

  I would sense when the mouse is positioned on one of these and change the type of cursor when it is over them.

  .. think of hyperlinks in a browser.

  I feel when I'm on the control of the chain itself, but not for specific text.

  Any ideas?

  Thank you!

  Charlie

  The string should contain a method that takes the coordinates (which you can get from a mouse event down or move the mouse) and tells you where it is in the string. Create a node to invoke for the string, and then select the method used (I think he called Point byte Offset). I don't have any experience with it, but I guess it compensates for things as sizes of scrolling and the police.

• How can I determine the position of the mouse in a 2D image control

  I have an app where I would like the user to be able to interact with objects in a 2D image control with the mouse.  To do this, I need to translate between the screen coordinates, which are transmitted with the events of mouse and in the control of 2D image.

  The problem that I am running is that I can't find a way to determine the screen coordinates of the top left corner of the drawing/client of the 2D image control area.  I tried to use the 'Position' of the image control property, but this results in a mismatch because of the difference between the upper-left corner of the image control (including the label, etc.) and the upper left corner of the drawing area.  See attached VI.

  Does anyone know how to get the coordinate of the screen from the corner of the drawing of the control of the photo area?

  Mark Moss

  I tend to use the mouse in the image control property to get the position.  Deals with things like the passage of origin for you.

• Tab control position in the center of the screen

  Is it possible to place a tab control, so that it is always at the center of the screen (even if the user changes the window size)?

  I tried to use the size of panel properties to determine the Center, then the reference position of the tab control. But it seems to me that his position is relative to its position (?) start.

  Is there a way to position it related initially to the Group?

  Thanks in advance.

  SSK

  It is simple. Unless I get it, isn't this what you need?

• Serious accidents with control of the expression spacing based on z-position of the layer

  I have massive crashes when you use this script expression below. I have just a text layer where I control the depandend letter-spacing of the current z position. From z = 0 to-500 (directly in front of the camera), the values are transformed by easyOut() from 0-10. So far, that's all.

  Now when I duplicate this line of text several times and start to change its position, then the accident happens. Text layers more I have the sooner the crash. This occurs when the edition therefore not made involved. In the preview is the applied standard rendering engine.

  Unfortunately, there is no specific error message - it indicates just that AFX no longer works and is now closed.

  My system features:

  I have 8 GB of RAM and 10 GB disk cache. That should be enough for a text flying around.

  I use the latest Version of CC of AFX 2015.1 13.6.1.6 running on Windows Ultrabook (Lenovo Yoga 1) 8.1. No CUDA detected so the preview is rendered by the CPU.

  Anyone has an idea why this happens? Help is very appreciated.

  max_spacing = 10;
  z_position = transform.position[2];
  var new_spacing = easeOut(z_position, -500, 0, max_spacing, 0);
  text.animator("Animator 1").property.trackingAmount = new_spacing;
  

  This is my test scene:

  http://Augenpulver-design.de/Exchange/tmp/AFX_Expression_Crash_Scene.zip

  You create a hole of logic by referencing the layer itself probably. Should not happen, then I would call it a bug. Probably to do with flaky matrix code also used to smack and a few other things. Try to use a Null value and parent the text to it. This would work much better.

  Mylenium

• Control a movieclip with the position of the mouse

  Hello everyone,

  I worked on a small project at work, I'm trying to controll a movieclip which consists of 60 still images of an aircraft (total 120 frames) that when played will show a view of 360 degrees of said aircraft. I can make it work with buttons, but ultimately I want to control the movieclip by moving the mouse. If anyone can help, that would be wonderful. Thanks in advance.

  Here is the code:

  import flash.events.MouseEvent;

  AC. Stop();

  stage.addEventListener (MouseEvent.MOUSE_MOVE, mouseMove);

  function mouseMove(event:MouseEvent):void
  {
  If (mouseX > 800 & & (mouseX < 1600))
  {
  ac.gotoAndStop (ac.currentFrame + 1);

  if(AC.currentFrame == 120)
  {
  ac.gotoAndStop (1);
  }
  }
  on the other
  {
  ac.gotoAndStop (ac.currentFrame - 1);
  
  if(AC.currentFrame == 1)
  {
  ac.gotoAndStop (120);
  }
  }
  }

  Using this code, the SWF file acts ok without error. I can do the movieclip play in any direction, however, when you move the mouse in the opposite direction that the movieclip continues to play forward or backward.

  Thank you

  Tommy

  There are at least two ways you can address this problem and they both require to control the position of the mouse more closely.  Now you have a general... If it's 800 > ahead and if his < 800="" step="" back,="" but="" when="" you="" step="" back="" from="" 1200="" to="" 1199="" you="" are="" still=""> 800, if you take one more step.  You need to either follow the change in mouse position or the position of the mouse to determine the framework of movieclip.  The second one is probably easier to design and will also be more accurate if the intention is to have a rotation for a displacement of the full scale of the mouse... otherwise you could just step back of a pixel at a time and in 120 pixels of movement... that might be what you want-the purpose is not explained in what you provided.

  (1) following the change of the position of the mouse - you must keep track of where the mouse was against where the mouse is when you check it... if(previousMouseX > currentMouseX)... you need to make the animation go back, etc...

  (2) with the position of the mouse to determine the frame movieclip - divide 120/1600... This is the number of images per pixel.  Take the current value of mouseX and multiply by that and make it an integer - go to this issue of image in the animation... simplifies this entire function similar to...

  function mouseMove(event:MouseEvent):void {}

  ac.gotoAndStop (int(mouseX*120/1600));

  }

  but refine to remember that there is no image 0

• Positioning of the Popup control on the scene (Notification control)

  Hello everyone.
  
  I am creating a JFX control that will provide an easy way to display notifications (i.e. control notification). This control extends to the javafx.stage.Popup (complete code on https://bitbucket.org/scekics/jfxnotification) and all is fine - except for positioning.
  
  I tried to replace the

  public void show(Window owner)

  method so that the default Notification is positioned in the top box in the center of the stage/scene (the most logical place, in my opinion), but I just can't do things. I tried different formulas, properties, scene and calculations based on stage, but in wain.
  
  This is the current method:

  @Override
      public void show(Window window) {
          Double sceneLayoutX=window.getScene().getRoot().getLayoutX();
          Double sceneY=window.getScene().getY();
          Double sceneWidth=window.getScene().getWidth();
          Double windowWidth=window.getWidth();
          Double myX;
          myX=(windowWidth/2.0)-300.0+sceneLayoutX;
          setX(myX);
          setY(sceneY+30.0);
          super.show(window);
          initAutomaticClosing();
  }

  Please note that these dimensions hardcoded are an act of a desperate man - so don't judge. :)
  
  Each recommendation (concerning this problem and Notification control in general) is welcome. Thank you!
  
  Published by: scekics on January 13, 2013 04:27 - corrected URL

  I think that the problem is that x and that you are calculating in the owner window are coordinates of the content compared to the window; Whereas x and y are you computer to switch to (...) setX and setY (...) are screen coordinates.

  How about this? The idea is to calculate the (screen) x coordinates of the notification of the (screen) x coordinates of the window, the window width and the width of the Notification itself (Similarly for y). I am sure you have understood, the width of the Notification is not calculated until after that he is shown, so I used links and Auditors to keep everything in harmony. This centers the Notification, which is not quite what you asked in terms of coordinates, but you can adjust if necessary.

  I'm not sure what happens if one of the overloaded methods show() is called. You can override those and to call this method.

      @Override
      public void show(final Window window) {
        final DoubleBinding xBinding = new DoubleBinding() {
          { super.bind(window.xProperty(), window.widthProperty(), widthProperty()); }
          @Override
          protected double computeValue() {
            return window.getX() + (window.getWidth() - getWidth())/2 ;
          }
        };
        final DoubleBinding yBinding = new DoubleBinding() {
          { super.bind(window.yProperty(), window.heightProperty(), heightProperty()); }
          @Override
          protected double computeValue() {
            return window.getY() + (window.getHeight() - getHeight())/2 ;
          }
        };
        final ChangeListener xUpdateListener = new ChangeListener() {
          @Override
          public void changed(ObservableValue observable, Number oldValue, Number newValue) {
            setX(xBinding.get());
          }
        };
        xBinding.addListener(xUpdateListener);
        final ChangeListener yUpdateListener = new ChangeListener() {
          @Override
          public void changed(ObservableValue observable, Number oldValue, Number newValue) {
            setY(yBinding.get());
          }
        };
        yBinding.addListener(yUpdateListener);
        this.addEventHandler(WindowEvent.WINDOW_HIDDEN, new EventHandler() {
          @Override
          public void handle(WindowEvent event) {
            xBinding.removeListener(xUpdateListener);
            yBinding.removeListener(yUpdateListener);
          }
        });
        super.show(window);
      }
  

• Calendar AS3 with the position of the mouse control.

  Hi everyone, thanks in advance to the community for any help you might be able to offer, it's all the incredably appreceated.

  It is a problem which had scratching me my head for months and be a facilitator, was really stretching my AS3 skills a bit.

  I create an interactive story of sorts and what is needed is to use the horizontal position of the mouse to scroll forward or backward on a timeline that is, when the mouse is in the dead center of the stage that the playhead does not move, but once he deveates right centre of the read head moves forward and plays the animation and a Once it moves to the left the read head begins to move backwards.

  Ideally I would have an acceleration effect, where the animation scrolls while the timeline at a minimum speed when the mouse is always close to the Center but at a faster rate once it is reached the edges, but right now, it is a secondary concern.

  There are also keys to move through various scenes, I can code myself, I only mention this in case it affects the rest of the code.

  Thanks for you help and any solutions or navagating alternitive methods a timeline are welcome indeed

  I'll be sure to pass on the karma to an area im more familiar with.

  var mc:MovieClip = MovieClip (this);  //<- timeline="" you="" want="" to="" control="" with="" mouse="">

  var maxScrollSpeed:int = 100;  / s max for mc above

  var m:Number;

  var b:Number;

  var prevFPS:int;

  paramF(0,-maxScrollSpeed,stage.stageWidth,maxScrollSpeed);

  this.addEventListener (MouseEvent.MOUSE_MOVE, scrollF);

  function scrollF(e:Event):void {}

  var fps:int = Math.round(m*mouseX+b);

  {if(prevFPS&&prevFPS!=FPS)}

  {if(FPS!=0)}

  {if(FPS>0)}

  playF (mc, mc.currentFrame, mc.totalFrames, fps);

  } else {}

  playF(mc,mc.currentFrame,1,-fps);

  }

  } else {}

  stopF (mc);

  }

  }

  prevFPS = images/second.

  }

  function playF(mc:MovieClip,_m:int,_n:int,_fps:int):void {}

  var playFFF2:Function = {function(mc:MovieClip):void}

  If (mc.m

  mc.nextFrame ();

  } else {}

  mc.prevFrame ();

  }

  If (mc.currentFrame == mc.n) {}

  clearInterval (mc.int);

  }

  updateAfterEvent();

  };

  MC.m = m;

  MC.n = n;

  MC. FPS = FPS;

  mc.gotoAndStop (mc.m);

  clearInterval (mc.int);

  MC.int = setInterval (playFFF2, 1000/mc.fps, mc);

  }

  function stopF(mc:MovieClip):void {}

  clearInterval (mc.int);

  }

  function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

  m =(Y1-Y2) /(x1-x2);

  b = y1 - m * x 1;

  }

• position of the object controlled by time

  So, I want to control the position of a white box using expressions because I can't use the keyframe I want (or I'm just stupid).

  I already have

  a = thisComp.layer("White_box").effect ("sound keys") ("Output 1") * 1;

  b = thisComp.layer("White_box").effect ("sound keys") ("output 2") * 1;

  c = thisComp.layer("White_box").effect ("sound keys") ("output 3") * 1;

  y = a, b, c;

  value - [0, y];

  in the expressions of the white box, so what can I do now to control the position of the box with the time?

  Select the layer with the expression, then the effect > options for expressions > Slider control.

  Then change the first part of the expression:

  mult = effect ("Slider Control") ("Slider");

  In addition, y = a, b, c will define just y of c, not of a + b + c.

  Dan

• Position in the list of control

  Hello!
  
  How can I get the position of an object is in a list control? The object is in an itemRenderer.
  
  For the example Code to join:
  How can I get the component < mx:Text > to have the text property equal to the position in the list?

  "Francisc Romano" wrote in message
  News:gh61oq$KL$1@forums. Macromedia.com...
  > Thank you very much! :)

  http://www.magnoliamultimedia.com/Flex%5Fexamples/LineNumExample/

  HTH;

  Amy

• Force the position of a control by using code

  I have a piping diagram on my front in which I place a custom control for a valve of switching on and outside. My program has a number of automated sequences, but also a "manual". In manual mode, I would like to change the State of my cock by simply pressing the control (which looks like a valve on the diagram). This part, I can do now. However, I join in the valve change the State through my code during the automatic sequence - that is to say I want to force control via the code instead of interaction to façade so that my plumbing diagram displays the status of my faucet during the automatic sequence. Otherwise, I could have the valve on the diagram of an indicator instead of a control, but I want the manual control to occur by pressing the valve on the diagram, not elsewhere. So I could do with invisible control at the top of the flag, but I don't know how do either.

  You understand what I'm asking?

  Can anyone help?

  Thank you

  Ron

  If you want something simple, just create a local variable of the control and write to it.

• Initial position of the vertical scroll bar control

  How to have the scroll bar position and the image centered at the opening. User can then scroll upwards or downwards. Dreamweaver CS 5.5

  http://www.centaursinvietnam.org/history/ihistoryUnitsMap.html

  I noticed that the "Go To" address did not work. So just go to this page on my Web site

  http://www.centaursinvietnam.org/history/ihistoryUnitsMap.html#cuchiline

  And "View Source" in your browser.

  Bruce

• Position of the button close the tab tab

  Just updated to 17 of Firefox on my Windows 7 PC. The close tab buttons are now on the left side of the tab instead of the right side. How can I move them back on the right side? I can't find other help on this and tried to play with: config userchrome, but nothing is. I can change the color, add a button in the bar, but does not affect the positioning of the buttons close the tab on the tabs themselves.

  Help!

  You have the module / theme / userstyle installed that controls tab behavior? You can resolve this problem by restarting with disabled modules. You can also reset firefox who, most likely, your problem will be solved.