Position the cursor after update of String

Similar Questions

• Positions the cursor can not extract the subset of waveform

  Hello

  I try to get two positions the cursor on a graph of waveform for the entries for the code below, which will start a process that will analyze a subset of the wave. The two sliders define the start and endpoint for the waveform (cursor 0 is the starting point, slider 1 is the endpoint). However, I have questions as Labview continues to tell me that the values I have chosen are not the integer multiples of dt. I don't know what it takes to avoid this problem. I tried to get cursor plots are of unique land types so they snap to the values x (I guess it's that simple concession means), but it makes no difference. Note that there are 2 slots originally going to this graph of waveform (waveform original and medium), but the selection should be only one of them (single parcel is attributed to original waveform). Help, please!

  Edit - just a quick update. I noticed that if I re - run the VI and activate this part of the VI that supports the subset of waveform, I actually get what I want. So, I guess that I don't put something correctly in another part of the VI where I have a structure of the event that updates the position of the cursor in numerical indicators. Could be the problem?

  I solved the problem. Have the two sliders on the plateau at the only plot on the original waveform should have prevented this problem, but I didn't notice that I was feeding in an another waveform beforehand which automatically changes the assignment of the cursor, causing my problem.

  Now cursors remain set on the only ground I want after a few adjustments.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• From the Position of the cursor after entering

  Hello

  When I hit Enter and the timeline previews are rendered, first always starts playing the song at the beginning of the work area.

  I would be happy if he could start where the cursor is... that replacement of the this work area adjust all the time.

  Is there a way?

  Kind regards

  Frank

  The way I use is to play timeline after rendering (or similar syntax) turn OFF. Then I can play just what I want.

  A way that could get closer you to what you want, would be to define a Point of In & Out for planning your bar, but you will not want to remember to come back to those back at the full timeline. Not sure that this method, if it works as you want, worth it.

  Good luck

  Hunt

• UI of Firefox is slow by typing or selecting the text (after update 33.0)

  After the 33.0 update, I noticed that typing a backspace in any area on a Web page or even in the Firefox address bar is slow to echo, on a lag of 1 second. Also, by selecting the text typed (to remove a TI, etc.) by a click-and - drag quick selects the entire, but when I click in the dialog box to deselect, the part which has not been posted as selected initially, is selected for a moment before the string whole hilite selection disappears.

  What makes the browser very cumbersome to use.

  This seems to be new to 33.0. I tried to reset Firefox, but it does not solve the problem. No problem in IE 11.0, so I do not think that the malware. I have also to keep all s/w and run avast/zonealarm for safety. I've never had an infection of malicious software on this machine. Win7 Home Premium 64-bit, 8 GB of RAM. The use of resources is low, so not out of process control.

  I have request the latest Microsoft "Patch Tuesday" updates 15/10, the same day that I updated to Firefox. This can complicate the diagnosis. But even once, IE was not affected, then, how the different Firefox UI for basic keyboard/screen I/O?

  If there is an easy way to "downgrade" to the 32.0.3 prior revision, I could try to confirm. Help, please!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Multiple_profile_files_created

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• Unable to connect to the internet after updating Firefox

  I've upgraded to Firefox 39 earlier and I can not EVEN access the internet. I put it through my phone. NEED of QUICK HELP please. Thank you.

  Try to remove all the rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

  You can also try to contact Norton support.

  • https://community.Norton.com/en/forums

• Why have I no internet connection, no cell phone, no wi - fi on the iphone after updating ios 9.3.1 5?

  Why have I no internet connection, no cell phone, no wi - fi on the iPhone 5 after update to iOS 9.3.1?

  Settings network is possibly damaged.

  Tap settings > general > reset > reset network settings

  Then see if your iPhone can connect to a Wi - Fi network.

  You will need to enter your Wi - Fi password.

• 'Unable to connect to the server' after updating to iOS 9.3

  After updating my iPhone 6 more for iOS 9.3 I get the message "unable to connect to the server. I can't connect to iCloud more!

  It's your phone antivirus. If you have an application like 'disconnect' you must remove it and then you can connect and reinstall.

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.

• How to restore the email after update of El Capitan

  How can I restore Mail after losing the internet connection by post after update my iMac OSX El Capitan. Connection doctor keeps trying in vain.

  Hello jsteveh,

  Thank you for using communities of Apple Support.

  If I understand your post correctly, you cannot receive emails in Mail on your Mac, and connection doctor shows you a few red dots. To help solve the connection doctor please follow through the link of support below.

  Use Mail connection doctor

  Take care.

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• HP Envy 13-j001ng 2 X: no rotation of the screen after updating Windows 10

  Hello

  After the Windows 10 update, the screen will not rotate automatically. Sensor apps tests show that they are working correctly. I have the rotation toggle lock in the notification Panel (I read that some people affected by similar problems don't have it). Any solution for now or should I just wait for updates?

  To solve the problem, I had to replace the pilot ODS sensor V2 with the Simple device orientation sensor driver. Now rotation works.

• Satellite L855 - 13 G - can't adjust the brightness after update Win8

  Hello

  After update of windows 8 and installed the latest AMD driver on the Toshiba site, I cannot adjust the brightness of the screen using the Fn F2 or F3.

  In this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69752&tstart=45
  He says that he has solved his problem but how?

  I installed the Package value added, but no change

  Thank you

  Franco said he has updated the graphics driver and it helped