Possible bug: constant Typedef ring not updated...

Similar Questions

• Standing ring not updated or by sending reminders

  I recently replaced my other shows with a different color and the first watch to day well and now this second do not update or even send reminders.  I have reset (hard) show several times and made sure shaped wrist, Tracker detection of delivery and any necessary detections are enabled.  I also calibrated this new watch repeatedly without any help.  The rings exercise and move work fine, but nothing for the last three days (since I got the watch) has updated to stand.  I also have odd watch twice hoping it would update and nothing... starting to think that it is a defective product.  Help, please!

  HI - try the following steps:

  On your iPhone in the app shows, go to: Watch My > General > wrist Detection - make sure it's open (may also turn it works).

  On your iPhone, in the application of the watch, go to: Watch My > privacy > disable Motion & Fitness - Fitness track (or, if it is currently disabled).

  Restart both devices by turning the two first set, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To reactivate: press and hold the side button until you see the logo.

  If you disabled followed fitness in step 2, now return to the configuration and turn it back on.

• Ring type constant def not updated for LabVIEW 2010 SP1

  I have a problem with the update of the control ring LV 2010 SP1 constants.  If I change the values or names of elements of a ring of control that has the defined type (type def or type strict def) my constant schema do not update.  The constants are set to Auto-Update of type def and if I right click on the constant, change to a control and then back to a constant, they update very well.  And if I have a control/indicator on the comic it refreshes also very well.

  Anyone else seen this problem or can someone seeks to duplicate?

  LV 2010 SP1 bug?

  Thank you

  Dan

  It is not a bug. See here - http://digital.ni.com/public.nsf/allkb/46CC27C828DB4205862570920062C125

• LV FPGA - Front Panel strict Typedefs are not flexible

  Hello

  When using LabVIEW FPGA and implement a strict typedef on the Panel before the FPGA, this causes issues with the FPGA generated in the PC Code reference. I have attached a picture.

  

  In the code of my PC, I generate the ref FPGA, then use it. In the subVIs downstream, I use the same REF. It works very well. But if I never change the strict typedef and recompile the code FPGAS, can I get the wire cut as in the attached photo. I have to manually recreate this indicator FPGA Ref and cut and paste in all the subVIs downstream, pain in the ass!

  One might think that the strict typedef should not update in this manual. You can fix in future versions, or I do something wrong?

  Configuration information:

  • Open FPGA VI reference is to the bitfile and dynamic mode
  • FPGA VI on benchmark is the same bitfile
  • Downstream of fpgaRef indicators come bitfile too.

  Thank you

  Justin Reina

  You bind the FPGA reference to an interface or to the VI?  I think that if it's related to the VI you should not see this problem, but if link you to the interface of this problem would be understandable.  Also, have you considered reference FPGA so a type definition?  Then, you only set in one place if it does not break.

  EDIT: in case it isn't clear, by binding, I hear a right click on the indicator and choosing configure the FPGA reference.

• Photo ring Type Def not updated

  I have a ring of photo type def.  I used it in an another vi.  At the time, the ring of photography has only 5 photos in there.  Later, I added another image to the ring of pic type def, but not a not updated of the vi.  Why is this?

  Given a ring of photo is just another type of ring, see if these appy son message

  Ring type constant def not updated for LabVIEW 2010 SP1

  strict type of ring bat bug?

  Strict Type def with Menu ring does not automatically update the related constants

• my default calendar on IPhone and IPad has disappeared. I can't see it either on ICloud and do not save on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud?

  My default calendar on the IPhone (and IPad) disappeared. I can't see it either on ICloud and make the back not my calendars on my Mac Book. How can I get it back? Is it possible to return to a previous update in ICloud and find?

  Go to iCloud.com using a computer, then settings. When loading this page, look down at left under Advanced and see if you can restore from there.

• Is problem with Windows Explorer (not Internet Expl.) - possible to reinstall this software or update?

  I have several problems which, after some time, can be attributed to a problem with the Windows Explorer (not: Internet Explorer)

  Examples:

  -files are not finished (so that they remain in a queue forever) (this happens every time)

  -When I try to replace a file from one directory to another this process is at a standstill (occurring rarely)

  -When I shut down, I get a message that trying explore but unable to play the fine tune (sometimes)

  -in Word, I get printer messages not responded or other problems with opening files-Word (sometimes).

  Remarkable (?): boot in normal mode is always successful, even after the crash on shutdown.

  Question:

  -is it possible to reinstall this software or update?

  - or something is needed to get a solution?

  Hi Niels,

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  Step 1:

  You can check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

  Method 2:

  If you are faced with the question in safe mode, you can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

• BUG: The task bar is not updated

  With the help of Windows 8 as it is downloaded yesterday. When you use IE10 launched from the desktop, the taskbar does not update the time in the lower right or update the names of sites web/programs open. We must return to the start screen, then returns to the desktop for the taskbar to update properly, but only at this time (it does not keep up-to-date)

  The day after my announcement there was an update of Windows and the problem seems to go away for now. Using a Microsoft account (Live.com), that happened when opening folde3rs or other applications, not just IE and date and the time have been properly updated on my PC, but not on the taskbar.

• JOINT-2 do not update 6500 ACL

  I have a 6500 JOINT-2 blade that is configured to create an ACL blocking in the 6500 to a few signatures. We work for a few years but recently stopped. The JOINT detects attacks and think it refreshes the 6500, but the 6500's ACL is not updated and the 6500 shows no connection IDs. I see no error msgs anywhere. When I manually insert an IP address block through the client of IDM, it appears in the sensor without error, but the 6500 is not updated. This seems to have started all of the time I installed S324 (26/03/08). The sensor is now S329. I restarted the IDS with no effect in behavior.

  Can anyone suggest what I could look to narrow the problem? Thank you.

  Are you running version 6.0 (4)?

  There is a known problem during upgrade from version prior to 6.0 (4). Passwords of blocking on routers, firewalls, and switches, as well as passwords for automatic updates were not converted correctly.

  CSCso31217 encrypted password not decrypted after upgrade

  For users already loading 6.0 (4), to solve the problem, the user must re-enter these passwords.

  For users still on older versions and want to upgrade to 6.0 (4), they should rather be upgraded to 6.0(4a). The 6.0(4a) allows to convert passwords correctly.

  NOTE: Users already at 6.0 (4) cannot be upgraded to 6.0(4a) and will have to reenter the passwords on the sensors.

  This problem has been seen with the 6.0 upgrade package (4) that when upgrading from old versions 5.1 and 6.0.

  NOTE: The system image and recovery for 6.0 (4) are all very well.

  If you are running a version of 6.0 (4), then that is probably your problem rather than an update of the signature.

  IF you are running version 6.0 (4), there is a small possibility that you might have discovered a new bug which ignores Cisco.

• Possible bug on role assignments

  I am using SOA/BPM 11.1.1.7.

  I found a possible bug when you deploy a BPM Application which mixed assignments (some directly to one user, others to a role of Application BPM (created in the workspace).

  I did two tests.

  Test 1.  Created a project/process of BPM with two lanes.  In organization, I assigned the roles of corridor users (to the embedded Weblogic LDAP).  On deployment, these roles were driven from the area space of work/Administration/roles (when logged in as a Weblogic).

  Test 2.

  In the workspace I created a few BPM roles (and put assignments users), then in a project of assigned BPM Application roles to my role of corridor.

  However, I created a corridor and made the assignment directly to the user.

  On deployment, the role which has been directly attributed to the user at the level of BPM projects has been eliminated NOT to the role area.

  A video of it is here: http://youtu.be/bWtEIRavlEY

  Stuart

  Hi Stuart,

  Could check you how your mapping roles work if you check "deployment of existing objects of update on ' option in organization.xml?

• CS Live icon not updated due to the Adobe Story

  It is terribly boring. The icon in Photoshop will not update, even if I already signed in and used Adobe Story, although it is completely useless for me in my business. What should I do so that he can recognize I saw the service and remove the flag? Or is it possible to remove items from this list or something?

  

  Any help would be greatly appreciated. Thank you!

  Jin

  I think you are talking about the "blue start icon" makes his appearance in front of the link «adobe story»

  If it is the case that this is a bug that is Senior in CS5 and has been corrected to "soon to be released update.

  for now, there is a solution:

  (1) close photoshop and kill the process of 'cs5servicemanager' of the activity monitor

  (2) now, delete the cache folder (location of the folder cache below, click to enlarge)

  

  (3) start photoshop and check

  Thank you

  Rous

  Adobe story team

• The apps of Podcasts and find my friends does not update in iTunes

  The apps of Podcasts and find my friends does not update in iTunes.

  Applications appear in iTunes as with updates, but iTunes says "Podcasts is available only on iOS.

  I usually never use the app store on my phone and always update of applications via iTunes.

  Please fix this bug.

  You see these warnings by mistake. These applications can only be updated as part of updating to iOS without iTunes.

  You can ignore the warnings or remove the two apps to iTunes. This will not affect these applications on your iDevices.

• Automatically updated - don't want to not updated - how to stop?

  Unable to find a solution - found several with the same prob and the only solution was to AppGuard (that I pay for!)

  I know that the consequences of not updated! -I'm not always up to date. How do automatic updates to stop. I have the correct settings (for not updating) in the options - I uninstalled the Maintenance service. Next assumption is to add (mozilla.com and .org) to my hosts file?

  Note that there was a hotfix released this week which automatically update Firefox for users who do not have disabled the automatic updates in Options > Advanced Options > update.

  • / Forums/Contributors/710488 Fix deployed this week update
  • Bug 928173 - create a fix the add-on to obsolete users a full installer and the opportunity to submit their records we

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  You can also delete the active - update.xml.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)
  

• Java will not update when checking for updates to the addon of Firefox 17.0.1

  Firefox 17.0.1, xp, sp3

  I got to tools > Add-ons, search for updates. It says 'Java (TM) Platform SE 7 U9' and "Java Deployment Toolkit 7.0.90.5" as obsolete.

  I am the part update and download updates. But, when I check it again, Firefox tells me that they are still not updated.

  I remove all the Java Control Panel and check with 'Hijack this' and ccleaner, reboot the computer, and then do the Java download again on the Java site connected by Mozella firefox links updated. I do all the updates process.

  After I check again when the update control module, it still shows both the Java above as always be exceeded.

  (What is happening here

  See for possible solutions:

  • http://KB.mozillazine.org/Java

• Windows 8.1 upgrade is not possible because win 8 is not enabled

  A few months ago, I bought a new laptop of Toshiba Satallite with 8 Windows preinstalled
  Now I want to upgrade Windows 8 to 8.1 Windows. But I don't see the upgrade of Windows 8.1 in Windows store. I think it's because my current installed windows seems not you be activated...

  When I try to activate, I get error: 0xC004F074.
  I found a solution using the command: SLUI 3 and then enter the product key to activate it, but I don't have a product key! There is no sticker with a product key on the laptop.

  Could someone help me with this question, so I can activate my current installation of Windows 8 and upgrade to Windows 8.1?

  Post edited by: mbarten

  Hello

  I had some problems with an upgrade to 8.1 to win in the past...
  Finally, I managed to install the Windows 8.1 update once the laptop has been set back to factory settings.

  I'm not sure if this should be done in your case, but where the 8.1 Win update is not possible after installing all the windows updates, you should reset the PC back to factory settings. After that the upgrade should work.