Possible bug with waveform graph

LabVIEW bug recently while I was going to create a vi to convert grapg labview in trend, I find a little bug graph labview and the roots of waveform that is impossible to solve unless the national instrument correct codes

bug is that invert mood of the chart if your minimum data are not zero, starting point of the grid is not working well and then you loos your grids.

anyone else having the same problem? You can find more explain in my LinkedIn Natalie Ford


Tags: NI Software

Similar Questions

  • Overload CPU display with waveform graph

    My sample code (yahoo.vi) presents the 2D DBL in size of 30, 000 * 2 table.

    Whenever the 2D table was displayed with waveform graph, I found there were big delay (around seconds) by CPU overhead but the time was very short.

    Once this has happened, the computer (8108 PXI double heart, 4G of memory, 32-bit win7) has been slow to exploit something.

    Is it bug or problem comes from the computer? or do you have a solution?

    labmaster

    My version of LV is 2009.1 (service pack installed)

    You need to transpose the table! (or right click on the chart... convert table)

    You are graphing 30000 plots with two points each (hard!) instead of 2 plots with 30000 points each (easy!).

    (Imagine you would display the legend of the plot with 30000 plots, it would be a mile high!)

  • General using polynomial Fit VI with waveform graph

    Hello gurus,

    I would like to ask how to use general polynomial Fit VI with waveform graph no GraphXY.

    Waveform graph gives me an array of values not X, Y, I think, what do I do?

    Thanks in advance

    Hi Omar,.

    I changed the example Labview embedded to use the general polynomial Fit VI with a waveform graph.

    But why don't you use a X-Y-Graph?

  • Possible bug with paragraph styles?

    Make a page with three breakpoints

    Add a block of text for the breakpoint

    Type "The CO2 is carbon dioxide" in text

    Format of the text frame in red "BOLD" (from the text window)

    Click on 'Create a new style of the applied attributes' (in the window paragraph styles)

    Apply the new style to two other break points

    Select the number 2 in the largest block of breakpoint text and format it as a script (from the text window)

    Select the text block, and then select 'Copy the formatting of the text-> all breakpoints'

    Check that all three break points seem correct

    Save the Muse site

    Narrow muse site

    Site open from muse

    Note that the formatting has been removed from all three break points

    Anyone else do this?

    The only workaround that I understood is not to copy text formatting to all the break points. He made the very tedious text formatting, but seems to work.

    Hi williamb72631036,

    I am able to reproduce the problem. You certainly found a bug, and I think you're right that this has to do with the help of "copy the text formatting of...» ». I can actually reproduce the bug without the help of paragraph styles.

    The only workaround that I understood is not to copy text formatting to all the break points. He made the very tedious text formatting, but seems to work.

    Rather than use the copy text formatting at all breakpoints, try switching the tool "4 t / 1 t" text in all of the breakpoints.

    When the setting is "4t" (as in the screenshot), then any changes you make to the text attributes are automatically applied through breakpoints. Just be sure to return it 1 "t" If you need to make a change in a specific breakpoint. Note that this is a comprehensive framework for setting and not by text.

    I hope this helps! And thanks for reporting this issue with clear steps.

    Anna

  • Possible bug with adding the query to your Favorites

    I noticed that when I create a MDX query say with a time range of 24 hours and then click on the "current query add to Favorites." When I click the "Favorite queries" button and pull again it changes hourly range custom and goes back to the time when I ran at the origin of the request and not for the last 24 hour period.

    This is expected behavior?

    It is in the 2.0.1 beta

    Hey Chase,.

    Yes, this is the expected behavior. Saved queries are both ONLY the slot is also recorded. For more information, see the following: Save a query in Insight Journal

    "Saved queries include a fixed time slot and are not updated. By saving a query, you take a snapshot of the log messages available in the range of time right now, when you save. »

  • Possible bug with report PPR sort on the login page

    Hi guys,.

    I created a report on the login page. Links for sorting, pagination and columns seem to not work.

    Here is an example on apex.oracle.com: http://apex.oracle.com/pls/apex/f?p=22519

    A very simple example with all the default settings on the table of demo MATERIAL. I guess it's releated for not having a valid user on page 101. Sorting preferences are stored by the user.

    See you soon,.
    Dietmar.

    Hi Dietmar,

    Anthony has considered this matter and this behavior is limited to the login page, i.e. the page mark you as the "session invalid page" in your authentication scheme. If you make a copy of your example page, paging and sorting would actually be working very well.

    Kind regards
    Marc

  • Possible bug with isGroup property

    Hi all

    Just a brief overview of what I'm trying to achieve.

    Often, I am facing problem fonts corrupted Flash files because some smart graphics people rather that you select the font in the font list type in the box that it is corrupt.

    To resolve this problem, I started creating a JSFL who find all the textfields on stage and in the library and correct the police. It works very well except in the case where the textfield object is in a group: it has been grouped. This problem is solved to disassociate an item but creates a problem with forms :(

    Suppose there is a shape on the stage and is grouped and I run the jsfl it successfully to separate the form but where the form is divorced and I run the JSFL it throws an error

    UnGroup() service is currently unavailable

    I tried to set the condition to avoid problems

    [PHP] if ((ormes .elementType == "shape") & & Etienne.isGroup) {}
    fSelectElement (Elm )
    currentDoc.unGroup ();
    } [PHP]

    isGroup property returns true for the grouped shape and form dissociated. This is why the error and I cannot solve the problem :(

    Hope someone can help with this...


    Here's the complete JSFL

    Http://www.2xupload.de/file/dfd82bb334a36f2fba4934d95e48db57/JSFL.txt.html [CODE] [/ code]

    Path can be fully copied
    C:\Documents and Settings\ < username >\Local 8\en\Configuration\Commands application



    Steps to reproduce this problem:

    1 create a shape on the stage. Select the shape and group (CTRL + G).

    The work of fine jsfl disassociates the form.


    2 create a shape on the stage.

    Running the jsfl throws the error.

    Forms will act as groups to be chosen. You will want to choose the form
    Then locate isGroup.

    "nITiNkIlLeRmEeRuT" wrote in message
    News:f09jhm$8R0$1@forums. Macromedia.com...
    > Hi all,
    >
    > Just a brief overview of what I'm trying to achieve.
    >
    > I frequently have problem face fonts corrupted Flash files because some
    > smart
    > people graphics rather than you select the font in the list of type fonts
    > in
    > the box that it is corrupt.
    >
    > To resolve this problem, I started creating a JSFL which will find all the
    > textfields on stage and in the library and correct the police. It works very well
    > except
    > in the event that the textfield object is located in a group: it has been grouped.
    > This
    > problem is solved to disassociate an item but creates another problem with
    > shapes :(
    >
    > Assume that there is a form on stage and are grouped and I run the jsfl it
    > separate successfully the form but in the case of the form is dissociated and me
    > run
    > the JSFL, it throws an error
    >
    > UnGroup() service is currently unavailable
    >
    > I tried to set the condition to avoid problems
    >
    > [PHP] if ((ormes .elementType == "shape") & ELMS.isGroup) {}
    > fSelectElement (Elm )
    > currentDoc.unGroup ();
    >} [PHP]
    >
    > but the isGroup property returns true because both grouped shape and dissociated
    > form.
    > Thats why the error and I cannot solve the problem :(
    >
    > Hope someone can help with this...
    >
    >
    > Here is the comprehensive JSFL
    >
    >
    > Http://www.2xupload.de/file/dfd82bb334a36f2fba4934d95e48db57/JSFL.txt.html [CODE]
    > [/ CODE]
    >
    > Path to copy
    > C:\Documents and Settings\ Settings\Application
    > 8\en\Configuration\Commands application
    >

  • Possible bug with popup LOVs

    Hello

    "I've created a Popup LOV (retrieves the first set of lines and filters), at the point where I open the popup and try to pick up anything by pressing the 'enter' key I m getting error" the requested URL /pls/otn/wwv_flow_utilities.gen_popup_list was not found on this server. »

    Also, if I have a certain value in the popup box and click on the little popup icon, I get the same error.

    I created an example page http://apex.oracle.com/pls/otn/f?p=50942:21

    Thank you
    Manish

    Manish,

    The page that you saw, http://apex.oracle.com/pls/otn/f?p=50195:1 is a kind of master/detail/detail report.

    There are two hidden items on the page to follow the customer "perceive" and order. The links in the customer report and order simply redirect to the same page, defining the hidden field on the pk for the selected customer or order.

    Customers and Orders queries are

    select decode(customer_id,
                 :P1_CUST_ID, 'CURRENT',
                 'Select') sel_label,
           customer_id,  cust_last_name||', '||cust_first_name cust_name,
           cust_street_address1||'
    '||Cust_city||', '|| cust_state||' '||cust_postal_code address from demo_customers select decode(order_id, :P1_ORDER_ID, 'CURRENT', 'Select') sel_label, order_timestamp, order_total, order_id from demo_orders where customer_id = :P1_CUST_ID

    You can see in each of them there is a decoding that compares the value hidden in the current KP, if it matches it returns CURRENT, otherwise select, this column is given an alias of SEL_LABEL. It is used as the link text, and it is also used in the model.

    When a new customer is selected I have a process that will solve the first as current order for this customer, it's

     declare
        cursor data_cur is
           select order_id, order_timestamp
             from demo_orders
            where customer_id = :P1_CUST_ID;
     begin
        open  data_cur;
        fetch data_cur
         into :P1_ORDER_ID, :P1_ORDER_DATE;
        close data_cur;
    

    It is subordinate to the

    :P1_CUST_ID is not null and
    :P1_ORDER_ID is null
    

    The model is a copy of the current topics in model alternation of colors. Most of the themes have a similar model. The report model can have up to 4 column templates, with or without conditions. The APEX motor will assess conditions and use the first one that is true (or no condition).

    The difference in most alternative models of color is the class applied to the td, alt of a data tag data, IE. t12data and t12dataalt.

    In my example, the first model of the column is defined as

    #COLUMN_VALUE#
    

    with a PL/SQL according to the expression of

    '#SEL_LABEL#' = 'CURRENT'
    

    You can see that it refers to the SEL_LABEL column and looks for the value of the CURRENT

    The second column model does suffer from any disease and is defined as

    #COLUMN_VALUE#
    

    Hope that helps
    Larry
    Don't forget to mark the answers useful or correct ;)

  • How can I display only a part of the scale in the waveform graph

    This is the first time I try to use the waveform graph, since now, I used the table of waveform.
    The reason why I moved to the chart, it's that I need cursors.

    I have 2 problem

    the first: in the diagram, the graph moves when I add a new data and the scale of the x-axis stay the same size, in the right size I always saw the new data. How can I do that with waveform graph?

    Second: How do I say Labview to the day I click on the graph, I need that because when move graphic I lose the day, and to make I need to zoom out, I drag the imprecateurs.

    All this must be done programmatically. The LabVIEW graphic accepts tabular data, not only as the table and the graph doesn't have the ability to retain the previous points, like the story of a graph. You will need to retain previous values and then continually update the graph with the old and new values to get a shift register "chart as behavior. Cursors should be written programmatically re of each iteration, since you rewrite the entire graph.

  • Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

    Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

    When the same text is seen in another browser, it is displayed correctly as "two."

    The same question is displayed on another computer.

    Thank you.

    Sounds that you use a font that supports ligatures (Palatino?).

  • Possible bug: save the table with double and extended precision to the worksheet

    If one concatenates an array of double-precision and an array of precision extended with the 'build' vi table, then recorded using 'Write in a spreadsheet file' vi any digits to the right of the decimal are reset to zero in the saved file. Regardless of the entry of signifier of format (for example %.10f) to the vi 'Write in a spreadsheet file'.

    I'm on Vista Ultimate 32 bit and labview 9.0

    This is a possible bug that is easily circumvented by the conversion of a type before you incorporate arrar in a worksheet. Nevertheless, it's a bug and it cost me some time.

    Hi JL,.

    No, this is not a bug - it's a feature

    Well, if you'd look closer you would recognize the 'save to spreadsheet' as polymorphic VI. As this polymorphic VI does not support the EXTENSION numbers internally (it only supports DBL, I64, and String) LabVIEW selects the instance with more precision: I64 (I64 a 64 bits of precision, DBL that 53...). Your options are:

    -the value of the instance to use as the DBL (by right click and "Select type... »)

    -make a copy of this VI, save it under a different name and make support number of POST (not rework the polymorphic VI like you would break compatibility with other facilities of LV or future revisions)

  • How to display the signal on a waveform graph in Labview Signal Express?

    Hello

    I want to display a signal in Signal Express 3.0 in a "waveform table", but don't know how to do it and I think that it may be impossible?

    In Labview, there are two ways to view data, a 'waveform table' or a 'waveform graph. The great thing with 'picture of waveform' is that it allows you to set a length of history and you can see the data move to the left (option graphic strip) that samples are recovered. It works perfectly.

    In Signal Express I can only select "Graph XY" or "Waveform curve" by doing a right-click of the mouse, but I can't select "table of waveform. Is it really true that it is not possible to view data in a graph of waveform "with Labview? (1 analog signal during streaming, 100 samples to read at the rate of 1 K)

    Thank you in advance,

    Enrique

    Hi Enrique.

    You are right that there is currently no graphic waveform in SignalExpress. The thing nearest you can join, is saved data under a log and then he looks one when recording (which I know this isn't quite the same interactive behavior).

    For your last comment, you wrote 'waveform curve', but I guess you meant 'picture' here as well.

    Sorry about that. We recently received this request, then perhaps in a future version.

    Phil

  • Two background colors for the same waveform graph

    Hello guys!

    I have a question for you: I am a new user of labview, so please be nice!

    So here's the deal: I just created a thanks 4 thermocouple temperature registration program.

    In real time, I then have a waveform graph 4 curves as soon as I start my program. And in my program, I had a button that allows me to record the temperature in a file for a period of time at a certain frequency.

    So, what I have is: I got my chart of waveform with a black background for example, and once I pressed the button, the background color will be changed automatically to highlight the part of the graph where the record occurs, then the background will return to the black after finished recording. In this way, on the same graph, I could say that registration took place from here to there by looking at the graph. I have two different background on the same graph.

    I don't know how to change the background of a chart using the property node, but is it possible to do what I want?

    I hope I'm clear. Otherwise, feel free to ask me for more details... I might post my vi if necessary

    See you soon

    Well, I know this is not exactly what you want to do, but you can try the following.

    Change the color of the line on the chart when recording occurs.

    You could therefore have a red line, then press on save, then it turns blue, then back to red.

    And when that is confusing since you have 4 different lines on the chart 1,

    You can change to a red line and a dotted red line, for example.

    Would that be acceptable? If so, I can show you how to do this.

  • Waveform graph lose history

    Hello to you all, useful forum fans!  :-)

    I implements an array of tape showing the values of several parameters in real time, using a waveform graph, but during the race he keeps resetting of the history of the card at irregular intervals.  Unfortunately, because it is for my work, I can't post the code.  I'll do my best to describe the problem and the installation program, however.

    I have a data acquisition loop to read the values in real-time in a table of the floats and stores it in a global variable functional memory data buffer that contains a table 2D of floats, a 'page' of floats by time interval.  This forum works at 50 Hz through the expectation of millisecond Schedule VI.

    I then a chart update the loop running at 10 Hz via forward schedule VI.  This loop reads the data of all samples buffer VI he has accumulated (usually 5, but sometimes 4 or 6) and converts it to an array of waveforms through the VI of waveform build by taking each column of data and by assigning to it, definition dt to 0.02 (50 Hz), and parameter t0 to time less dt current multiplied by the number of samples in the table.  The terminal waveform graph is then set to this table of waveforms.

    Most of the time that it works well, with the new values added the previous values to create a smooth graph of multiple plots with the correct values are displayed.  However, sporadically the chart Flash empty and begin to fill again from scratch.  I can tell is just jump in time (the axis of abscissa) because I can move the axis scroll bar and there is no other data to scroll.

    I in addition to these two loop loops a GUI-structure of the event and a task of State machine loop.  However, I have excluded these two loops ownership history of the graph through inspection and breakpoints.  This is why I can only think that there are conditions or the type of data which, once introduced in terminal results of the graph by adding DO NOT present data as usual.  Empty array is not the answer; I tested with a separate simple test VI, and therefore in the chart, keeping the currently displayed data but do not update new data.

    I would appreciate any idea what any of you have as to the possible causes of this behavior.  I apologize again for not being able to view the actual code, although I can work to establish a similar setup with the data buffer, etc. in a separate VI and after that.  Also, I would like to know if you want me to describe the other logic, settings, or the circumstances for you.

    Thank you very much for your help!

    -Joe

    Whenever I've seen this problem when you use a waveform he chart endded up being a problem with;

    (1) the number of parcels has changed.

    (2) the names of the plot has changed (WF attribute).

    (3) time info Goffy where t0 and dt were inconsistent with what was already posted (new data point a t0 that is earlier than what is already plotted this plot)

    It's a pain to figure out the first time.

    Ben

  • missing samples in the waveform graph

    Hello world

    When processing a file .wav into pieces, I noticed that there are missing samples on the waveform graph where two pieces must be met for the display. What could be the cause of this? Any help appreciated. Thank you!

    Milan

    Your method of reading in pieces in a for loop is create a table 1 d of waveforms with the tunnels of automatic indexation.  It is as well as what you have the data appear in different plots.  I don't know if that's what you want.

    But if this is the case, the problem is that you get to the last point of the first plot, and the first point of the next parcel is a different value.  Because they are two different plots that you do not get the line to join them, as you do between points that are part of the same plot.

Maybe you are looking for

  • Re: Qosmio F60 - keyboard beep sound

    Hello I recently got my Qosmio F60 and I noticed that when I type, only really when I type fast, the computer will beep.It is found mainly around power key (between E and D & C, U, J & M). When I type fast I have no doubt tend to hit the keys a littl

  • After 4.4.2 update can not use WiFi &amp; Bluetooth togeth

    After that I updated to KitKat 4.4.2 cannot use WiFi and Bluetooth at the same time. Must turn off Bluetooth to use WiFi.can you help with this problem. I have the Motorola droid RAZR maxx hd

  • How to program the pci-1429

    Hello My name is Mohammad khader and I'm with GWENAEL, we just bought the PCIe_1429 and I would like to know: 1_ how that program us, are we to verilog, c or lapview only 2 - the jury has fpga to program? 3. can we have the Schematic of the Board so

  • How to close a responsible testplan using c#-OPUI

    Hello I created an OPUI in ca that loads a testplan and execute it. But I can not find a function to close an already open testplan. Means that when I load testplan-1, it runs SeqFileLoad, IO tetsplan-2 load and it runs SeqFileLoad. But when I insert

  • Microsoft is not validate my window

    I downloaded and updated to a windoe and who has been activated online. but now I am unable to download essential security. What should I do?