possible power problem

Hello

I have a desktop HP Pavilion 7865 has started to give me some power problems.  I followed the troubleshooting steps to

http://support.HP.com/us-en/document/bph06788#n414

The first time it's happened that I noticed that the power light little would go as I connect the power cord to the back of the unit.  But the little green light and then returned.  After some tests, the power light remained on and I was able to turn on the pc.  However, it started again this morning so I finally took my monitor power cord and used this one to connect the power supply to the back of the computer and to a power outlet and it works.  I plug the pc power cord into the monitor and my monitor works too so I don't know if it is or is not the power cord, but I'll go out and get a new one and see if that solves all my problems.

However, my question is this... If the problem is with the power supply that I plug in can be replaced?  If so, it is something I can do myself or should I consider somewhere to do?  Also, if I need to replace the power supply and I can do it, how can I know what type of replacement power supply unit power I need to get and are there any other cables that I also need?

Thank you so much for all your help.

The information I found States 7865 HP is a Win98ME around 2001. The stock PSU is a Bestec 200W.

Form factor is Micro ATX PS3. Here's a picture: http://www.911forpcs.com/7865.html

If your going to replace the power supply, you must perform steps. I found a contradiction Newegg.

Micro ATX

http://www.Newegg.com/product/product.aspx?item=N82E16817338031

http://www.Newegg.com/product/product.aspx?item=N82E16817104113

PS3

http://www.Newegg.com/product/product.aspx?item=N82E16817338005&cm_re=ps3_power_supply_replacement-_-17-338-005-_-product

Tags: HP Desktops

Similar Questions

  • On the Satellite P30-131 power problem

    I have a power problem and I tried the process of elimination, but could do with help, I gave as much detail as possible and appreciate any help or advice.

    This started a few weeks ago and seems to be deteriorating slowly.
    I turned on the laptop and all 3 lights before the main power on fully charged battery light and light green...

    I started noticing a few times when my power cord is plugged into the laptop that, without warning, the laptop switches to the battery power and also turns off power light, battery light turns off too but which may or may not happen, in any case the laptop is still on but now running on battery.

    I then out of the supply cable and reconnected it hoping that power is restored, but it has no effect, I have to close then low laptop unplug then Pug back in and I get all 3 lights and then I can start.
    Now, when I boot it does not always solve the problem and I can finish on a few seconds of starting battery.

    Its certainly not the battery because it has a new battery replaced 12 months however, its either the adapter or the connection inside the laptop that plugs into the adapter.

    The reason I think it is perhaps one of them is when the laptop going to battery, lead that is always plugged into laptop, I moved, and this can cause the return of t lights and also the laptop back in, power once again, but if I let go then it goes to the battery again one the light turns off. I also took the battery out and kicked and the laptop works but has lost the power sometimes when I moved it turned off my tour so I'm sure that it is related to the lead, but do not know if its internal or external.

    Any help or advice appreciated

    Thank you

    What kind of help did you expect exactly?

    > Its certainly not the battery as it was a new battery replaced 12 months however, its either the adapter or the connection inside the laptop that plugs into the adapter.

    It seems you have tested everything that could be tested using common control procedures, I think that more is not possible
    I can provide also a few suggestions and I m coming to the conclusion that neither electronic power supply is not ok or your power adapter.
    But I would tend to the first; electronic power supply.

    As you can see that these are only suggestions

  • Tecra R840-S8450 - power problems - help with Blink Codes

    Looking for help, thinking on the right track, but want to confirm and get things fixed.

    Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

    It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
    Start ". However it don't tell me what is wrong so that I can try to do something about it.

    Would be grateful for the help, thanks,

    David

    Of course quite here, is that no one from Toshiba has the manual to find codes?

    Posted by dgwbdavid
    Looking for help, thinking on the right track, but want to confirm and get things fixed.

    Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

    It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
    Start ". However it don't tell me what is wrong so that I can try to do something about it.

    Would be grateful for the help, thanks,

    David

  • Power problems: computer turns off when the power supply cord is unplugged.

    original title: power problems: computer shit turned off when the power supply cord is unplugged.

    I have a HP Pavilion dv2000

    Windows vista home premium/sp2

    AMD Turion (TM) 64/2 1.80 ghz processor

    1 GB memory

    32 bit operating system

    I have 2 problems with this laptop.

    !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

    When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

    now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

    the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

    Any help will be greatly appreciated.

    Hi aloum,.

    (a) what kind of mouse you are using?

    (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

    Step 1: Test the mouse on another computer or another mouse on the test computer

    To determine whether the mouse or the computer is defective, follow these steps:

    1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

    2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

    In regard to the battery not holding charge

    Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

    Troubleshooting battery problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Envy Pheonix 810-210: Possible POWER supply problem?

    I bought the HP Envy 810-210 a Phoenix earlier this year and recently replaced a 645 GTX graphic card a GTX 960. When I replaced it I noticed the power cord was appropriate is more good in the power supply and can fluctuate a little. Now when I move my PC, the power cord will be disconnected and will Crackle. This turns off my computer and I have to tinker with a correct position in the socket to restart.

    What would be the recommended action for this? Is this a problem of cord or plug, do you? Y at - it a power supply that matches or is better than that which is currently in my computer (here), which will be a fit if it needs to be replaced?

    Hello

    The CX600 Corsair or CS650m would be an excellent choice for a power supply.

  • Power problems 4090 CDS

    Hi all
    Im having serious problems with my 4090cds. It comes on good, when the battery is in but after about 30 minutes of operation, it shuts down and displays a flashing orange light.

    It shows the same orange light flashing when I try to turn on without the battery, just of the PSU. It does not even attempt start until it shows just the orange flashing immediately.

    Can someone help, it starts to get really annoying.
    PS I don't think that this is a problem with the power supply or battery I used both in a satellite 300CDS and they work fine.

    Thanks in advance

    Hi neil

    It is possible that the electronic power module is defective. If I understand you there is blinking orange light.

    If the power supply microcontroller detects an error lamp DC In sends a blink code. This code is some hex codes and some technicians to service partner can read and declare what he can be.

  • Charging battery and power problem problem.

    The problem occurs only once I have start the load the laptop after that I used the battery for either a small or for a long period of time.

    The battery will begin to charge and the laptop runs from the power supply for 5 minutes at a time. After that 5 minutes, the laptop switches the power source primary battery mode, even if the laptop is plugged.

    Another 5 minutes after that, the primary energy source to switch back and the battery will begin charging again. It will constantly continue to do that, even when the laptop is turned off.

    This is asif that is defective, however, is the second adapter I used and the same thing happens again. I tried looking in the power settings as much as possible and can't seem to find anything that can cause this problem.

    Just today, I noticed that the battery light flashes sometimes white when the laptop has its power as the main primary energy source. I don't know if this has anything to do with this problem. I looked through the manual and support documents as possible and impossible to find a solution to this problem.

    If the battery is low, when I start the laptop loading, that means I have to stop using my laptop, that this process will continue to arrive and finally the battery will stop and the laptop will be extended even if the plug is connected.

    Help, please!

    Hello

    A friend of mine had a similar problem but on non-Toshiba laptop. The reasons because it is a dysfunction of the taken power there was a loose contact between the socket and the motherboard

    The technician said that the motherboard needs to be replaced because it would be too difficult to solder this Jack once again

    If the mobo was replaced, but it was a costly affair

    Don't know if this could be the case even, but this looks a bit like the issue of power supply...

  • power problem 1800-254

    My laptop worked very well, and then windows 98se, crashed while you restart it and all I get is power led, led, battery led, all are green no display not hard don't drive activity but if I use the slider on the front of the cd media will play cd, I tried to figure out what is wrong with him, but still nothing I tried the bios update and it wont read the help of floppy. ?
    Please email me at [email protected]

    Post edited by: paulwasuk0220

    Hello

    Have you tried to recover the device? Is it possible to boot from the CD?
    Well, otherwise I think you cannot solve this problem with the installation of any software.
    I guess that it s a hardware malfunction, but it's not easy to say what part has a default.
    It is maybe something wrong with the HARD drive or the motherboard.
    In this case, the best idea is to contact the ASP.

    Best regards

  • with laptop power problem

    I have a problem with my laptop. I pluged in a power supply, but my computer flashes as if it is jumping off the battery power. I'm also losing strength of power of dough.

    Help

    It seems to me that the charger is not plugged properly (check the connection) or your battery is going bad (if it is loss of power and charging do not when the system works on current alternative.)  Also, remove and reinsert the battery to make sure it is properly connected.  It could also be a bad sector adapter, but there is no way to really diagnose unless you have another who strives to test woth.

    If this does not work, I suggest you return it to the manufacturer for service and for a possible replacement of the battery (or you can use a local computer repair shop good reputation, but it is unlikely that they will have a battery that fits).  You can also try just to order a new battery and charger and installin themt yourself to see if that solves the problem (and then determine what is the real culpruit.  If this isn't the case, return the batery and charger (or what we tested OK) for a refund and, if necessary, and then send the computer in diagnostic and repair - it may be a loose connection or something else went wrong - I'm not sure how these things are related, and I don't know that it varies from computer to computer.

    This is not a problem of software of any kind - I'm reasonably sure it's one of the reasons that I mentioned above.

    I hope this helps.

    Good Luk!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Dv7t-4000 power problems

    I bought a dv7t-4000 in September, and so far I've been pretty happy with it. However, I had a lot of problems with smooth audio video-sounds would sometimes be looped for a few seconds and things would be long to load. Recently, I noticed that all the issues went away once I unplugged the AC adapter and started running on the battery. I looked at the three places where things could go wrong - the power grid that I plugged the power cord and the real internal components of the laptop. I tried to run the laptop in four different locations with the same result, as well as three different cords (120W and 90W, which should be supported by the dv7t, as far as the manual says). After testing both, I felt that the only option is the internal components. I checked the forums here and read this thread, who told me that this problem happened to other laptops, but I know for some that the power cable is not the issue, as says this solution. I have the latest video and audio drivers, as well as all updates of Windows/BIOS/material I can find. Could I possibly get a confirmation of what I think is wrong, or maybe other solutions short to order a new power connector and disassemble the laptop to jump in the spare room?

    Serial number CNF0341WKS

    Product number WV703AV

    Pseudo-resurrect this thread in case where someone else happens to have this problem. After 3 separate the sets of repairs on one and a half months time, a replacement of the motherboard has finally solved the problem. It is a problem entirely based on the material, and cracking only open the laptop and reinstalling the card will fix it. Good luck to the other people in the case where this helps out you.

  • Possible redirection problem - Google redirect spy

    My Hotmail emails are no longer visible.  My research is rediredted to an offer to sign up for Hotmail sweeping. I beleve I have the Google redirect spy but I donlt know how get rid of it. I use Windows 7

    Hello

    You don't specify your Windows version, so the underside is mainly for Windows 7 - Vista is very similar.
    Use EXECUTE instead of start - search for XP.

    -----------------

    Check these:

    IE8 redirect problems - possible Causes and fix the redirect problem
    http://www.brighthub.com/computing/Windows-platform/articles/60039.aspx

    http://EzineArticles.com/?Google-redirect-virus-fix---how-to-get-rid-of-Google-virus&ID=2450094

    http://ask.MetaFilter.com/100853/Oh-that-nasty-Google-redirecting-virus

    http://www.GeeksToGo.com/forum/how-to-fix-Google-redirects-t267407.html

    ------------------------------------------------

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE

    IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
    installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
    possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right.
    Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask to
    It's here.

    Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
    not all are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Also get Malwarebytes - free - use as scanner only.
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    =========================================
    =========================================

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER THAT you are sure that the machine is clean of any malware.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
    See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
    see your subsidiary local Support site.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Power Mac G5 power problems...

    Hello, on a quest to find a G5 computer, I found an early 2005 Power Mac G5 (2x2.7GHz). The first time I plugged it in and turned on, it works beautifully. The second time, I pressed the power button and heard a loud noise from the power supply. I replaced and this is what is happening now:

    When I plug the power cable in, there is a small clicking noise about a second after plugging in, and the power led on the front of the machine flashes for the click. However, it does not at all depend on when I press the power button. When I unplug the cable, it makes the same noise about a second after I unplug the unit. I see a pale glow of the light output after unplugging it.

    Anyone have any suggestions to solve this problem? It is part of a collection, that's why I want to do operational.

    There may be defective capacitors or other power supply problems, including

    overheating in the dust inside the power supply or air channels. And

    If the device is cooled by liquid, other things may be involved.

    Since all the PowerMac G5 power supplies are considered to be custom,.

    to get a good replacement is a way hoped to improve the situation.

    Unlikely as is, actually an inexpensive job.

    Have you tried a SMC power management unit reset? Or reset PRAM?

    • How to reset the SMU on a Power Mac G5 (late 2004) or Power Mac G5 (late 2005) - Apple is supported

    To reset NVRAM (PRAM) see:

    • How to reset the NVRAM on your Mac - Apple Support

    Several links appear in the result of this research; some look promising:

    https://DuckDuckGo.com/?q=Troubleshooting + G5 + PowerMac + power + supplies& t = ffsb & AI = web

    I read about the noise, the PowerMac G5 can do when some power components

    fails; Troubleshooting is involved. Somewhere I had a link to a source for official PDF
    REPAIR, download for offline use. -I do not see if I can locate the item...

    Apple Power Mac G5 (early 2005) manual .pdf

    Apple Power Mac G5 (late 2005) manual .pdf

    Apple Power Mac manual G5.pdf

    Good luck!

  • Satellite Pro U400 starts - power problem?

    Hey,.

    my liquid U400 down without any reason and doesn't start anymore.
    My first idea was damage from CPU, but even if the laptop is taken to power the power led does not illuminate.

    (1) make U400 notebook work normally when the battery is removed, but pluged in power? Because if not maybe only the battery is broken.
    (2) any other ideas? :)

    Guarantee is more than 1 months :(

    Answer to your question is YES. You can remove the battery and use your laptop with AC power only. In most PC stores showing the rooms are placed laptop without battery. Probably the batteries have been stolen in the past.
    Anyway, they can run with AC power only.

    When you connect the laptop to the power plug and the power light is not on I assume that there is a problem of electronic power supply.
    Contact the nearest authorized maintainer and ask for help.

  • With Satellite A30 power problems

    Hello

    Over the last four years, I have been using a Satellite A30 with XP Pro... had no problems whats so ever until that last months... I started to notice the battery life becomes lower before (prob because of the decrease in battery life) but also when he is on the grid it will charge the battery to 100% but instead of power are removed from the sector It starts to drain the battery even when the sector is connected.

    Another problem is that I have to keep or stop the laptop goes into hibernation mode so it can recognize it is powered from the battery to load... even in this case, it may take several attempts for the laptop to begin to charge the battery...

    These problems started start after warranty, and was released in additional insurance coverage

    Any information or help gladly appreciate it that I fight to get assignments done University

    Thank you

    Ben

    Hi mate,

    had a similar problem with an other friend A30. After sending the machine to an ASP (certified partner), they told us that the internal charger was defective and they have offered to swap the motherboard.
    But given that the motherboard was really expensive for him he sold the machine on Ebay and bought and Satellite A200 which is a machine really well.

    I guess that the motherboard is gone...

    That's all

    See you soon

  • Satellite A110: keyboard, touchpad, power problems

    I have a Toshiba Satellite A110, purchased a few months before. In recent weeks, it started randomly locking the keyboard and the touchpad (with or without external mouse plugged - although an external mouse still works).

    Now there is power to the top of the issues, with the suspended system Bios Toshiba screen, can fully initialize maybe once in five.
    Acquisition of wireless network is also very temperamental. I tried this software I can think (new drivers/virus scan/uninstall-reinstall), with the exception of a reinstall full backup disk Toshiba.

    Any advice would be greatly appreciated.

    Thank you

    Hello

    I think we should first find out if the problem is software or hardware related.
    In this case the installation of the operating system with the Toshiba Recovery CD is recommended.
    After installation, the laptop should work without worries.

    But if the unit will hang and not start properly there could be something wrong with the hardware.
    I think that your warranty is valid and in this case you should always contact the ASP in your county for a check.

Maybe you are looking for

  • How can satellite P25-S607 - I get a XP MCE CD recovery

    HelloI have a Satellite P25-S607.On the back side is a sticker of license for Win XP MCE.The HARD disk drive has been broken, and I don't have the original CD with the computer. Is it possible to get a replacement.I think it will be an OEM Version.

  • MS Office 2007 does not work with Windows?

    How to make my software of MS Office 2007 "compatible" with my version of Windows?

  • copy several files by clicking on its shortcut files

    I have 6 000 files on my computer. I made shortcuts for everything that 6 000 files and send all this file shortcut to a friend and he has select 200 shortcuts files around and sent me. Now I especially want to AUTOMATICALLY copy only 200 files and s

  • X 99 m2 problem

    I built an i7 x99deluxe 5960 64 GB RAM, video card dual with buckets of hard dry, including some SSDS.   The C drive is a 250 GB SSD and is just too full, so I bit the bullet and bought a 500 GB Samsung m2 drive to replace.  I installed it in the PCI

  • How to reverse the axis graduation

    I am a beginner in adobe illustrator help, and I just need to know how to make the axis, say the category axis, in adobe illustrator from maximum to minimum...? How to make my own scaling?