possible to have a display value and the return of LOV

Hello

With the help of obiee 11g, I have a variable prompt that takes column as value.
I have the report that I use a diff column eual to this prompt value.
I wanted to know if its possible at all to have a view and a return value
i.e. in the lov, we show a value and when we choose we choose a different value that goes to the filter

For example. If we have an APAC region in the table, and then in the show LOV in Asia-Pacific and it returns APAC, so that
in the data filter gets filtered using ICCA.

Thank you

You can try something like this sql in the Prompt Variable:
SELECT CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE' TO THE "subject domain name.

And then in the report so you need to change the column fx filter
CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE '.

Note: This is very good for the case where you have less no.. of LOVs in the column.

Hope it will be useful...

Tags: Business Intelligence

Similar Questions

  • Is it possible to have automatic display without going through the iPad also require the word to reactivate?

    Is it possible to have automatic display without going through the iPad also require the word to reactivate?

    While at home, there is no reason to have the password, but I want the device to sleep to save battery when I put aside.

    You should be able to have the settings > general > Autolock set for a time while having parameters > Passcode > Passcode turn off - you'll still have to "slide to unlock", but not to enter a password

  • Displaying an Enum value and the name of the element when the values are not sequential

    Hello

    I use Enum and controls indictators successfully with shared and modbus variables.

    For example:

    Name of the element Value

    Off:                0

    Start 1

    On                2

    Œuvres enum Setup, I don't need to look for a cheat sheet to convert the name of the element in its value, I see the name of the item in my order/indicator.

    My new variables, I'm currently managing look like this:

    Name of the element Value

    Code 0 x 201

    Beginning Code 0 x 202

    Code 0 x 001

    Any ideas how I can display the value and the name of the element on a façade. (for a control and indicator)

    For enumerations, it seems that the item values must go 0,1,2,3,4,5

    I found the solution:

    http://digital.NI.com/public.nsf/allkb/79BA4505AE8C755E86256FB2000140B0

    use a ring of text and deselect the sequential box

  • Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?

    Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?
    I can only have my Bluetooth speaker on or my internal speakers on my outings Sound System Preferences.
    Is it possible to have both of them at the same time?
    Thank you for your patient

    To my knowledge, no.

    Barry

  • Is it possible to have as a home inside the documentation button

    Hello

    I am using the HR 11 and get ready to explore the possibilities offered by the WebHelp, and I was wondering if it would be possible to have a home button inside the Web documentation that would point to the first point, when the documentation is open.

    I did not see as possibilities of control items everything except the Index, glossary and search.

    Thank you

    Thank you so much Rick.

    I'll try it out and eventually let you know how it goes, OK?

  • I want to know if I can buy Muse without subscribing to creative cloud Adobe because I don't want to pay monthly for this service. I want ONLY the program. I already have Illustrator, photoshop, Indesign and the rest of the adobe programs, so I only MUSE.

    I want to know if I can buy Muse without subscribing to creative cloud Adobe because I don't want to pay monthly for this service. I want ONLY the program. I already have Illustrator, photoshop, Indesign and the rest of the adobe programs, so I only MUSE. is this possible?

    You can subscribe to only Muse - without all the other programs - for about 20 $par month.

  • Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

    Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

    Ivan,

    If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

    Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

    To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

    A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

    https://forums.Adobe.com/thread/1587587

  • Get the old value and the new value based on the date

    Hello

    I have a table called list created below with the rest of the insert statements.

    CREATE TABLE ROSTER
    (
    NUMBER OF ROSTER_EMPLOYEE_DEF_ID
    NUMBER OF EMPLOYE_ID
    NUMBER OF DEFINITION_REGION_CODE
    NUMBER OF DEFINITION_DISTRICT_CODE
    NUMBER OF DEFINITION_TERRITORY_CODE
    START_DATE DATE,
    END_DATE DATE
    )



    INSERT IN THE LIST
    (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
    VALUES
    (1,299,222,333,444, 'JUNE 1, 2011', 30 JUNE 2011 "")

    INSERT IN THE LIST
    (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
    VALUES
    (2,299,223,334,445, "1 JULY 2011', JULY 20, 2011" "")

    INSERT IN THE LIST
    (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
    VALUES
    (3,299,224,335,446, 'AUGUST 1, 2011', AUGUST 30, 2011 "")

    INSERT IN THE LIST
    (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
    VALUES
    (4,300,500,400,300, 'JUNE 1, 2011', JUNE 20, 2011 "")

    INSERT IN THE LIST
    (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
    VALUES
    (5,300,501,401,301, "1 JULY 2011', JULY 20, 2011" "")


    In the table above we have columns like

    EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE

    The result I'm looking for the table above is based on the employe_id OF start_date AND end_date

    I need to get the OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_CODE
    Similarly, OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_REGION_CODE
    and OLD_DEFINITION_TERRITORY_CODE and the NEW_DEFINITION_TERRITORY_CODE


    I need to get a row of data for each employee saying old value and the new value

    for the employee 299 there are 3 records he puts the new record which is the latest date is to say beginning August 1, 2011 and end date of recordings old 30 August 2011
    beginning July 1, 2011 and July 20, 2011


    For the data in the table above, I need to get the data as below


    EMPLOYE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_CODE OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE START_DATE END_DATE
    299 223 224 334 335 20 JULY 11 30 AUG 11
    300 500 501 400 401 20 JUNE 11 JULY 20, 11


    Please suggest me to get the result above, based on the data. Please let me know if my messages are not clear


    Thank you
    Sudhir
    SELECT  EMPLOYEE_ID,
            OLD_DEFINITION_REGION_CODE,
            NEW_DEFINITION_REGION_CODE,
            OLD_DEFINITION_DISTRICT_CODE,
            NEW_DEFINITION_DISTRICT_CODE,
            OLD_DEFINITION_TERRITORY_CODE,
            NEW_DEFINITION_TERRITORY_CODE,
            START_DATE,
            END_DATE
      FROM  (
             SELECT  EMPLOYEE_ID,
                     ROW_NUMBER() OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE DESC) RN,
                     LAG(DEFINITION_REGION_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_REGION_CODE,
                     DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE,
                     LAG(DEFINITION_DISTRICT_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_DISTRICT_CODE,
                     DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE,
                     LAG(DEFINITION_TERRITORY_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_TERRITORY_CODE,
                     DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE,
                     LAG(END_DATE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) START_DATE,
                     END_DATE
               FROM  ROSTER
            )
      WHERE RN = 1
    /
    
    EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE OLD_DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE OLD_DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE START_DAT END_DATE
    ----------- -------------------------- -------------------------- ---------------------------- ---------------------------- ----------------------------- ----------------------------- --------- ---------
            299                        223                        224                          334                          335                           445                           446 20-JUL-11 30-AUG-11
            300                        500                        501                          400                          401                           300                           301 20-JUN-11 20-JUL-11
    
    SQL>  
    

    SY.

  • We currently have questions get applications and the list of services. Please try again...

    I just signed up for cc, received confirmation that I'm in and confirm my email address.

    The following text is displayed when I click on "Download now" under Services and applications:

    Adobe_error.png

    We currently have questions get applications and the list of services. Please try again in a few minutes.

    This happens in Firefox and Chrome.

    I'm kind of miserable at the moment.

    The problem has been resolved.

  • Compac cq62: downloaded windows 10. Now I have a black screen and the caps button continues to blink. All the answers.

    Downloaded Windows 10. 1 week later, I have a black screen. When I turn on the power to all I get is a flashing caps button one am not able to connect. Ilha a Compaq cq62 model.

    I have seen this reported, and the response is not good, sorry:

    "Problems of upgrading Windows 10: black screen after update (new).
    Some users taking advantage of the Windows 10 upgrade are the conclusion that once the completed upgrade their device just gives them a black screen and does not start.
    Microsoft is still working on a fix for this, but it's not a way to avoid it now. Worse, it seems that the problem that happens on multiple PC configurations. For now, we can only suggest using the utilities provided with your backup device and create some external media backup before starting the upgrade in case that happens. If this happens and you live near a Microsoft Store, make an appointment with them to have your device looking if you experience the problem. Some reports (such as those of our comments) indicate that disabling anti-virus programs before performing the upgrade prevents this issue. »

    http://www.GottaBeMobile.com/2015/07/30/7-Windows-10-upgrade-problems-how-to-fix-them/

  • I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup.

    original title: game Fallout 3 on Windows 7 problem

    I have install fallout 3 and the last update (1.7), but when starting a new game, he tell me that windows is having a problem reading it & then it locksup, I have a Toshiba Satellite, Fallout New Vegas works perfectly on my laptop, how can I play Fallout 3, is here to play Fallout 3 on windows 7.

    Hello

    You can see the link provided. It gives information that Fallout 3 is not compatible with Windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=fallout%203%20

    Windows 7 Compatibility Center: Fallout 3 http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=%20Fallout%203&OS=32-bit

    You may need to contact the manufacturer of game for support

  • I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

    I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

    original title: wap encriptación

    Hello

    Maybe this can help.

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914

  • I have a hp laptop and the original key of windows behind the laptop which is glued is half damaged then, how can we get that original key again?

    I have a hp laptop and the original key of windows behind the laptop which is glued is half damaged then, how can we get that original key again?

    Hi yayatisharma,

    Product key Finder programs are USELESS for Vista computers preinstalled, as they find the product key of plant manufacturers, which is used for installations of mutiple during Assembly of the computer.

    This key will not help you reinstall Vista!

    If you communicate with HP they will post you Recovery DVD for a low price to reinstall Vista and they do NOT require a product key

    Or ask the use of the recovery Partition, which must be copied to the hard drive HP

  • Has anyone else tried to get the English version of Windows 7 ISO of the MS download site? I have a valid key and the website let me only to get the Korean or French version

    Has anyone else tried to get the English version of Windows 7 ISO of the MS download site?  I have a valid key and the website let me only to get the Korean or French version.  English useful MS tech 'UN' told me that the English version is no longer supported and should I install one of these versions and then download the language package and install it.  Has anyone else been in this position?  It was a horrible experience with the online chat with technical support.

    Marcus,

    Some people have persevered with contact support via the link on the MS download site and have finally received the download links temporary for an English version.  [You will find these discussions if you looking for the Korean forum as most people in your situation included that word in their title of the question.  I don't remember one of these threads containing any additional info that would be of no use to you.]

    If that does not appeal to you & you still cannot find your original installation disks, then buy a disc-relocation

    1. Amazon now stock reinstallation DVD for just a quid [the link is for their UK site site American stocks also to them].
    2. These seem to be exactly what they claim they do not have a product key and that they are specifically described as being for reassembly only - in other words, they are not an attempt to distribute pirated Windows.
    3. You must use your own product key for activation.
    4. Make sure order you Windows 7 edition {Home Premium etc.} that is identified on your certificate of authenticity [the label that contains your product key].
    5. Some of the sellers provide 32 bit and 64 bit DVD, while others provide one or the other.  So make sure you order the right kind.
    6. These discs can do everything what a system repair disc can do, so you'll not need to make a separately.
  • I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    Copy the contents of the cd in a desktop directory.  install from this directory.

    or

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

Maybe you are looking for

  • Icons to fill my address and search bars

    I'm using Firefox 29.0.1, and when I open a tab at a website, my address bar and search bar are suddenly filled with icons such as cut, paste, print, etc.. The URL disappears or is blocked by the icons and unreadable. In addition, icons do function -

  • Satellite A500 - 12 c - need

    Heya, I need a measurement on the upper compenent of the Satellite A500 12 c. I want to stick up, but I'm afraid that I'm not using the exact size. Kind regards Xone

  • HP Pavilion G6 2310se: HARD SSD update drive

    HelloI'm running the disk HARD 500 GB 5400 RPM for the moment and it is slow for me. I want to update for Samsung (MLC) 128 GB sata III 6.0gbps 7 mm (Ultraslim). with a caddy HARD drive where I can place my HARD disk to store data and SSD is used onl

  • On Envy 4502 error code

    My new 4502 envy was working fine until I loaded the software on the drive.  Now, I try to print, and it gives me junk on the paper and then stops and gives me the 0XB3B207B6 error Code.  Can someone help me get out of this mess?  I can't even stop t

  • Is possible to listen to music through external speakers or headphones and computer speakers simultaneously?

    What I mean is that I can have his two pc speaker and external speakers?