Post 10 IOS could not be detected

I use a website safari can refresh my situation.  It has always worked on my iPhone to ios 10.  Now, I get a message that says 'position could not be detected.  I have reset the location services, makes the market, rebooted my phone, reset network services... nothing I tried worked.  This site has worked well in the IOS 9.3.5.

I'm having the same problem. Did someone came up with a solution?

Tags: iPhone

Similar Questions

  • Windows could not automatically detects the network proxy settings

    Recently, I noticed a triangle appearing little attention with my network icon in the taskbar. When I right click and solve problems, it comes with this message. Windows could not automatically detect the network proxy settings. My internet has been really slow lately, but I wonder if there is a problem with my network? or is - something that my ISP has set?

    (This message is intended for all problem reports)

    Check the Internet Options (Internet Explorer tools or configuration panel / /Connections Options tab / LAN Settings and make sure that Proxy Server is not checked even if you use Firefox.)  Check the settings in Firefox Tools / Advanced connections / settings (should be use system proxy settings or no proxy).

    Search for malware, especially using malwarebytes.

    Try these commands in this order in an elevated command prompt.  Not the first first, then reboot and try.  If still bad, try the second.

    netsh winsock reset
    netsh int ipv4 reset

    If they do not help, please after the output of a command ipconfig/all-order

  • Material changes could not be detected

    Hello

    I have a problem in windows 7 when I connect any usb device to the PC nothing no past on this era, no installation of device or nothing showed on the screen. When checked with hardware troubleshooting tool and devices it has detected an error that is "hardware changes will not be detected.

    Please help me with this if anyone knows the solution please tell me

    Thank you

    Go to Device Manager, scroll down to USB controllers and right click and select uninstall.  Restart your PC.  Windows 7 should now re-dectet and reinstall the appropriate drivers for the USB ports.

    Are Unit of hardware detected now correctly when you plug?

  • iOS 10 Notes app detects more phone numbers

    I used to use the Notes iOS app as a convenient way to store multiple access to phone numbers to work.

    If you have added a phone number it would detect that and you could just click the link to dial the number.

    In iOS 10 it stopped working.

    Links of # in the Notes app phone are no longer assets and if I try to add a new phone # s, they are not detected as being able to compose.

    Hello, elbenoit!

    Thank you for joining the communities Support from Apple! It seems that you are having problems with call function in the Notes. I know how it is important Notes work properly. First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

    The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords to ready for the start of the iPad to the top.

    If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

    1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
    2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
    3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

    See you soon!

  • Seagate 120 GB external HARD drive could not be detected

    We use Win XP Pro, when you plug the HDD of the promt "Cypress AT2LP RC42" System. How to detect this material?

    In the Device Manager Composite Device failed to start Code: 10

    Hello

    I think it might be 2 possibilities, why it does not work.
    First the external drive is dead and that is why it does not work or there is something wrong with the USB ports.
    Sometimes after installing SP2, the ports will not work.

    For this, I found this Microsoft Knowledge base article:
    http://support.Microsoft.com/?kbid=873169

    I think you should try to connect this USB HDD on another computer, make sure that the HARD drive is not altered.

    My brother uses a with USB cable external HARD disk that supports 2 USB connectors.
    This cable allows you to use the USB ports and dual power.
    I think that's not a bad idea, try using a USB hub with an external power supply and then connect the HDD to this hub.

    Eventually, it helps.

  • Entered digital high frequency to the FPGA could not be detected OK

    Hello

    We want to connect the CMOS camera with PCIe-7842R with SCB68 box to analyze the image in the FPGA. There are PCLK (pixel clock) signal (36 MHz) and 8 bits of data.

    On the 1st, we write a test program to ensure that we can detect the PCLK correct which is attached as program.png. The program is very simple there is a loop timed with 80 MHz, which should be enough take 36 MHz signal. If the value of 8000 "Digital 2", we should have 3600 (+ -1) like "digital." The reason why we (+ -1) is that we have no synchronization, is supported in this test program. And we can get the right result in this configuration.

    2nd part, connect us data to 8-bit on FPGA and we get a wrong result of PCLK. Even connect us only 1 bit (which is labeled as DIO1 program) data, the PCLK is disturbed, and we can't find out why. The configuration of the connector is attached as connector.jpg.

    We tried to make 2 very distant digital signals, but are still not. We tried to change the cables connected between SCB68 and FPGA of SHC68-68-RDIO cable for SHC68-68-RMIO cable because we think she may have better armor. We have a better result but still bad.

    Now, we put "Digital 2" 8000 and we have about 3400 ~ 3500 as 'digital."which is false.

    Does anyone have advice or commands on this problem? I'm very appreciate your kind help.

    Thank you.


  • Linny Hey, the site you posted Error 1606.Could not access network location % APPDATA%\. It is also for Vista?

    I went on the site and I've seen XP.  If not. Do you have a recommendation for Vista?  I tried HKEY_LOCAL_MACHINE\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders. I've not found errors in this folder and created a new folder for APPDATA.  I also got this error when I tried to install the updates for Java

    Hello CyndiLou,

    Thanks for posting on the Microsoft answers Forum.

    Try this article. I don't know what article Linny gave for you.
    KB 886549 - you receive an "Error 1606" error message when you try to install or remove a program from Microsoft

    If please reply back and let us know if you still need help.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • The printer could not be detected on the message of network during the installation of the Canon PIXMA MX922

    Unable to complete the driver installation the new installation because of this message. Went through the establishment of the liaison WiFi several times and connectivity was still present. Connected to my D-Link router 626L and saw the connected printer but the referenced ip address is 0.0.0.0. Tried to assign a static ip address through the printer and also to use the Windows cmd prompt, all to nothing does not.

    Called Canon Support and these 2 changes in adjustment solved the problem:

    (1) turn off the Wireless LAN DRX setting

    (2) disable the IPv6 setting

    This article explains how to set the settings of the printer.

    Hi mimiaz58,

    Thanks for sharing!

  • A SCREEN BLUE, COULD NOT START WITHOUT HDD FOUND, AFTER WINDOWS XP UPDATE IN FEBRUARY

    Like many of you, after the updates of February I was not able to start my laptop.  Safe mode does not work and when I tried the solution accepted since the recovery/Repair Console, I got a message saying "Setup cannot find hard disk units installed."  After hours of searching for a solution, I finally thought to it and now everything starts very well.  For those of you are having similar problems, here's what I did...

    (1) visit this site: http://techrena.blogspot.com/2008/10/how-to-install-your-own-wndows-xp-in-hp.html and follow the instructions for the BIOS.

    If this link does not work for your computer, try this one: http://techrena.blogspot.com/2009/01/integrate-your-own-drivers-or.html

    Then, insert your Windows installation CD and when it loads, press R to repair.  Then follow these instructions:

    (2) select the option for C:/Windows

    (3) type this command: CHDIR $NtUninstallKB977165$\spuninst

    Press ENTER

    (4) type this command: BATCH spuninst.txt

    Press ENTER

    (5) type this command: systemroot

    Press ENTER

    When 6) complete, type this command: exit

    (Most of the instructions above have been found on this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/)

    If your computer did not come with a Windows CD, you can make a CD for recovery of your choice or borrow one from a friend.  For the purposes of recovery, I don't think it's important if you have XP Home, Pro, etc., any CD will work.  There are websites online that will show you how make a recovery CD... and even provide the files... it takes just a little research.  Unfortunately I did not save the link for the site that I used: o.

    If for any reason, you are still unable to get your computer running and want to get your important files on your hard drive, I found this amazing, easy and free method.  Just download the OS and burn the ISO to a CD and then start on the CD and load the operating system (direct loading from CD - do not install) below.  You will be able to browse all your files and transfer them to a USB drive or burn them on a CD: https://help.ubuntu.com/community/LiveCD  certainly a good thing to keep on hand for future if nothing else!

    Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

    Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

    A rootkitTrojan horse, to be precise. References include:

    MSRC: Restart issues after installing MS10-015 and the Alureon Rootkit:
    http://blogs.technet.com/msrc/archive/2010/02/17/update-restart-issues-after-installing-MS10-015-and-the-Alureon-rootkit.aspx

    Backdoor.Tidserv [AKA Win32/Alureon] and MS10-015

    Backdoor.Tidserv does a very good job in this sense, particularly with the
    latest version (TDL3), which uses an advanced rootkit technology to hide its
    presence on a system by infecting one of the low-level kernel drivers, then

    cover his tracks. While that the rootkit is active, there is no easy way to
    detect the infection, and because he's so deeply in the core, most of the users
    don't see anything wrong in the system
    ... Even worse, because the infected
    driver is critical for the system boot, Windows will not start in Mode safe
    either [after installing MS10-015 on an infected machine].

    http://www.Symantec.com/Connect/Blogs/Tidserv-and-MS10-015 [emphasis]

    TDSS rootkit silently owns the net

    TDSS rootkit 3rd variant is the last member of the family of rootkit Tdss is
    spreading rapidly all over the world. While a number of rootkits is just
    developed as a proof of concept, this is not the case. TDSS rootkit is well
    known for corporate antivirus because of his goal to get full control of the
    PC infected and using them as zombies for its botnet.

    During these years, he always showed a team of people behind it, which
    always applied advanced techniques often able to bypass antirootkit software.
    In fact, this last variant could be easily identified as the stealthy rootkit
    in the wild.

    This infection is having all the best rootkit MBR, the best of
    Rustock.C and the experience of the old Tdss variants. Result is an infection that
    is quickly spreading on the net and it is without being detected by almost every security
    software and 3rd party anti rootkit software.

    .. [20 Nov-09] terms no antirootkit is able to ignore the disk filtering
    technique used by Tdss rootkit but, even if it were possible, this rootkit
    could not be detected by file size cross check because size of the
    the original and infected files are exactly the same.

    http://www.Prevx.com/blog/139/TDSS-Rootkit-Silently-Owns-the-Net.html [emphasis]

    W32/Alureon-variants are frequently 'lost' by W32/FakeAlert, etc., infections; CF. http://blogs.technet.com/mmpc/archive/2010/02/24/if-it-calls-itself-security-essentials-2010-then-it-s-possibly-fake-innit.aspx

    NOTE: KB977165 for WinXP was 'shot' on 11 February. Although he remains available for a manual installation to the Windows Update Web site, it is is more "pushed" via automatic updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Window can not automatically detects the network proxy settings

    Original title: window could not automatically detect the network proxy settings
     
    Windows network diagnostics says constantly "" window could not automatically detect the network proxy settings"" How can I fix it I have a Windows laptop, 8 and I can't use the internet, most of the time, but the internet bars are full and there is no yellow triangle with a! next to him.  Usind Ethernet instead of WIFI makes not much difference if you please, help.

    Hello Sarandeep Singh,

    Thanks for your reply Sarandeep. Now, this problem has been resolved. I that follows the steps of: https://support.microsoft.com/en-us/help/15287/windows-why-can-not-get-connected ( run Networking command after using the convenience store network )

    Thanks again.

  • I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

    I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

    You have tried: If you can not connect to the iTunes Store - Apple Support ?

    And I tried to do a soft-reset/reboot the phone?

  • After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad: "your iPad could not be activated because the activation server is temporaril."

    After updating my OS to iPad 2 to the last iOS 9 on March 22, 2016, I get the message below after several attempts to turn on my iPad:

    "Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support. »

    I am based in Lagos in Nigeria and can't seem to find any Support from Apple for my country on the web. Please urgent help because I can not access my iPad. Thank you.

    How did you get the update? via iTunes or ios

  • could not activate iPad2 after upgrade to iOS 9.3

    could not activate iPad2 after upgrade to iOS 9.3

    What error do you get?

  • Win XP (32-bit) with iTunes 12.1.3.6: iPod Nano A1320 16 GB error: an iPod has been detected, but it could not be identified properly.

    I have the following environment:

    Win XP SP3 (32 bit)

    iTunes 12.1.3.6

    iPod Nano A1320 16 GB (5th generation)

    I get an error when I try to connect my iPod Nano A1320 16 GB (5th generation):

    An iPod has been detected, but it could not be identified properly.

    Please disconnect and reconnect the iPod and try again.

    If the problem persists, uninstall iTunes and then reinstall iTunes.

    I tried my other iPod Nano A1320 16 GB (5th generation), and it gives the same error.

    I looked at other similar positions with this error message and tried their solutions, but none of them does not seem to work.

    However, my iPod Nano A1285 8 GB (4th generation) is recognized by iTunes 12.1.3.6.

    Any suggestions? Thanks in advance for your help.

    Since it's Windows XP, it's maybe the old problem of the "drive letter".  Being a Mac user, I don't know the exact procedure, but try changing the drive letter of the iPod.  Maybe that's how

    Change the drive letter for iPod

  • With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    bjmrao wrote:

    With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

    Please ask Whatapps since you use their app.

Maybe you are looking for