Post 5.3 upgrade questions

Hello

I'm planning and uprade to View 5.1.3 to view 5.3. I have a test environment that has a Vcenter and a login server while my prod configuration has vcenters active 2 and 3 connection brokers. I'm going to test first level to get the sensation but unfortunelty my ins' configuration prod t equal to my test setup which raises a few questions.

1. If I upgrade the composer in the first window of maint but let see 5.1.3 composer will resume function when the two vcenters are upgraded?

2 when I read the vmware upgrade doc, it seems that once you start the upgrade all servers connection making the env unsusable view to end-users. Is this correct? Is there a way to keep advice works for users, while I upgrade the servers of connections?

1: the upgrade just composer on the vCenter boxes or make some type vCenter also put you?

2: there is no way I know.   The best practice is to stop all services display for each CB in a replica group when upgrading.

Tags: VMware

Similar Questions

  • I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

    I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available had merge to HDR & Panoramic photos. I can't find these. Where can I find them.

    It is unfortunate that Adobe has chosen to use the "update" in the notice inside LR 5. It is not an "update". It is an 'upgrade '. Thus, you pay if you want. Also as usual, Adobe directs clients to the CC solution and makes it hard to find perpetual license option.

  • Satellite A300 - question post Windows 7 upgrade

    G ' Day all,

    I made 2 posts to Microsoft Discussion groups:

    * Post 1: *.
    G ' Day all,

    Installed two systems (networked) from Vista to Win 7 HP (32 bit).
    Problems minors network/homegroup - all resolved.

    Desktop computer - fine.

    Laptop -?
    Toshiba Satellite 300.

    "After reboot, any connection displays dialog" Options of Performance "-no pagefile."
    A/c administrator can change (Managed/auto/manual) - "Restart required".
    as expected.

    GoTo previous paragraph (loop).

    Do you want?

    Kind regards
    Pat Garard
    Melbourne, Australia

    * The Terminal 2 (auto answer): *.
    For those who might follow...

    The solution can be found at:
    http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f

    > Run the following from a high CMD prompt:
    > sc config start = disabled afs
    >
    > (Note that the syntax of the command is very special -
    (> there is no space before the =, but there is an after)
    >
    > Then restart.
    .....
    > To start a high CMD prompt, click the round of departure,
    > type cmd.exe {in the bottom search box that has focus},.
    > in the list right click on CMD.exe, then choose 'run as administrator '.

    SFA - SEEMS to BE a distributed network file system...

    It would be wonderful if someone knowledgeable could clarify this...
    ... how it came to be on a Toshiba laptop...
    ... Would be - this 'SQL Server Active Directory Helper"(the only difference
    between the desktop and laptop)? ...
    ... Why is it a problem? ...
    the solution isn't a problem which not has not yet manifested? ...
    ... and his impliications!

    Kind regards
    Pat Garard
    Melbourne, Australia

    Is there an explanation of "Toshiba"?

    Hi mate

    First of all, it seems that it of not clear to you that it is a user to user forum
    You can start a discussion with users of common Toshiba laptops

    Return to your ad;
    To be honest it of not clear to me that you are talking about or what the problem

    You are trying to update Vista to Win 7?
    Well, please note that there are some applications which could not be supported by Win 7!

    Maybe you should take a look here:

    + Windows 7 upgrade: step by step Upgrade Guide +.
    http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

    + Windows 7 upgrade: Notes and Restrictions +.
    http://APS2.toshiba-tro.de/KB0/TSB9A02PE0000R01.htm

    Check it! Perhaps, it might be useful.

  • OBIEE 11 g Post Upgradation questions.

    Hello
    After you migrate successfully catalog and a repository of 10g and 11g, most of the reports is works well, with the exception of some reports that pull the following error:

    Error codes: OAMP2OPY:ACIOA5LN
    Assertion failed: isXsiTypeSqlExpression (rExpr) on line 67 of C:\ADE\aime_bi\bifndn\analytics_web\main/project/webreport/exprformulautils.cpp

    The same reports that give this error are running successfully in the side of the analysis. But when you embed them in a dashboard that they give the above error.

    Kind regards
    Dev.

    Dev,

    Yes.We had the same problem. Request Oracle support for patch 12561330. We have solved the problem after you apply this hotfix.

    Rgds,
    DpKa

  • Satellite A300 - CPU & GPU upgrade questions

    Hello everyone!

    I have a satellite A300-1 to 9 (Intel Core 2 Duo T8300, Ati 3650, lcd WXGA 1280 * 800, 2 discs hard etc.) running Windows XP + SP3 + utility Toshiba etc...

    These are my questions...

    (1) can I upgrade the CPU Core 2 Duo P8400?
    (I know that T8300 and P8400 use the same socket)

    (2) can I put my screen WXGA (1280 x 800) with a WXGA + (1400 * 900) or WSXGA + (1680 * 1050)?
    How will this affect the battery consumption?

    (3) having the computer plugged (a/c power), when I close the lid, the computer goes into sleep mode.
    When I open the lid, the computer wakes.
    Unfortunately, the computer is running on battery power is not the case... I opened the lid and nothing happens,
    I have to press the power button for pc to wake up...

    can I fix?

    Thanks in advance...

    Satellite A300's newest model of laptop and I wonder how you feel about this hardware upgrade after so little time to use.
    In General, these upgrades are probably possible, but certainly not supported by Toshiba.
    In other way such radical update as a poster of upgrade is absolutely not logical for me. You probably know how expensive these parts are.

    In my opinion, should you sold your laptop and buy new with exact material you like to have.

    What about the last question? Please check all settings in the control panel and make sure that you have chosen the right option when the notebook is on battery or plugged in.

  • HP Pavilion dv6000 Hard Drive Upgrade Question

    I have a HP Pavilion dv6500 entertainment computer laptop, processor Intel centrino duo and 2 GB Ram under Vista. The original 160 HD SATA Gbt completes and slow and I want to upgrade to a new HD. I think I have a Seagate 1 TB 2.5 inch notebook computer Solid State Hybrid Drive. Will be of this form and it works without any problem on this laptop? What is a recommended option?

    Your advice would be appreciated.

    Kind regards

    Chris

    Hi @Chris_8318,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6500 Entertainment of CTO Notebook and concerns with the installation of a hard drive again. If you keep the new larger than your original SSD and it supports Sata 5400 RPM 9.5 mm, 2.5-inch hard drives, you'll have no problems.

    Here is a link to your manual page 23 for specifications.

    Please let me know how it goes.

    Thank you.

  • 8470p display an upgrade question

    Hi all

    Hi, I'm about to buy a HP ELITEBOOK 8470p (C5K16UC), which comes with a 14 "diagonal HD anti-glare (1366 x 768) LED backlit.

    I was wondering if it would be possible to upgrade the (14 inch screen LED screen for laptop to HP EliteBook 8470P HD + 1600 X 900 Series).

    Here is the LINK on ebay

    Thank you guys.

    Hello

    I think that you posted a few questions autour. To get a perfect fit, you must buy the whole.

    Kind regards.

  • SSD upgrade question

    I got this is the section of the BONE. Perhaps this is the right place *.
     
    Hello, I bought recently for a M7-J078CA from HP. The specs are all good for what I need, except I'm not too happy with the 1 TB drive 5400 RPM. However all in all with the rest of my needs, it's a fair trade off the coast compared to the other available models. It's my 5 HP and I love them.

    My question is, if I had to buy an SSD to replace the current drive, will be factory installed HP OS work properly on it? I remember years ago that try on a desktop computer and the recovery disks do not recognize the HARD drive, so would not install the OS thinking that it was another computer. I want to upgrade to an SSD for my OS and games load and run faster.

    Second, if it is possible, it would be as simple as removing the 1 TB drive current, installation of the SSD and then start with the recovery discs? Or should I install the second disc in the Bay of alternatives and try to install the OS in this way?

    I then format the 1 TB drive and use it as a secondary storage only

    Hello again iEvermore,

    To answer your question, yes the DVD will work without the operating system and HARD drive. As for putting in the SSD that I provide you with support documents to both HP. The first HP Notebook Hard Drives & solid state drives identify, prevent, diagnose and recovery of drive failures care and Maintenance measures. This document will explain how to put in and configure the SSD. I am also including the paper Support HP HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY 17 Notebook computer Touchsmart Maintenance and Service of Guide which if you reference page 2 & 3, you'll see the following information for the HDD and SSD support.

    Supports 6.35 cm (2.5 in.) 9.5 mm hard disks (. 37-in) and thicknesses of 7.0 mm (. 28 - in) (all hard drives use the same bracket)
    Customer-accessible Serial ATA

    Supports the following drives:
    ● 1 TB 5400 RPM, 9.5 mm
    ● 750 GB 5400 RPM 9.5 mm
    ● 500 GB 5400 RPM 9.5 mm and 7.0 mm

    Configurations to two hard disks:
    ● 2 TB: (1 TB 5400 RPM x 2)
    ● 1500GO: (750 GB 5400 RPM x 2)

    SSD drive only configured with up to 8 GB system memory:
    ● 32 GB mSATA (some models only)
    ● 24 - GB mSATA (some models only)

    Page 48 has step by step instructions on how to replace the HARD drive as well.

    I hope that gives you the information you need. Thanks for posting this topic on the Forums of HP. Have a wonderful day!

  • 9150 memory Upgrade - Question once again

    Good day to all,

    I have 2, Dimension 9150 who receive upgrades. The first machine was fine with OS WIN 7 / 32 PRO. Updated BIOS (A07), not installed the required software, no problem, everything no problem. RAID driver install also, no problem. Problem I have is the memory upgrade. Get machine 2 update, but not until this problem is resolved.

    Been revised post old topic of memory and still has not found an absolute remedy to my question. Machine (1 and 2) are 2 GB; 4 512 PC2-4200 (all locations showing on bios config).  I installed 4; 1 GB PC2-5300. Problem? Must not like system accepts 4 GB maximum and is also accepted speed Max.

    My problem is 2 GB in slot 1-2 (white) are good, no problems (boots to windows without error beeps). Check the BIOS and find sticks of memory are reading fix it. When I add the other 2 sticks of 3-4 (black), error on boot beeps and lights 1-3 lights telling me memory error.

    I recently updated a dimension 4700 and used memory not dell Komputer Bay. Could see all the modules and showed 3.76, so I bought the same memory for this machine. I know that in the past, Dell machines are "FINICKY" when it comes to memory.

    Is this the case? If so, Crucial memory has been discussed and I might add 2 (2 GB each)? That's what I was not able to see the answers. Part of the crucial says Yes, post only memory. The other Yes was that I could use sticks of 2 GB. Spec note 1 GB is max stick, per slot.

    I am at a loss, if you're looking for an idea on a direction.

    Yes, low density 2 rank INTEL chipset compatible ram works fine. The other way to say it isn't that 380 Precsion ecc ram works fine.   The GX620 has the same problem where we will see more ram by the bios but total ram is limited to 4 concerts by the chipset.  Upgrade to a precision 380 allows a full 8 gigabytes of ram.

    You could put 4 x 2 gig and he would show even in the bios but the ram would not be usable and the machine does not start with 64 bit OS.

  • Cross-platform upgrade question

    I'm posting this question here, as I've had less than satisfactory results from ask customer support about this. I know that this forum is moderated by some great people at Adobe and hope someone can clarify this matter for me.

    I currently own CS3 Design Premium for Windows and need to buy CS5 for Mac. A search for 'Cross-platform swap' on Adobe has led me to this page: http://kb2.adobe.com/cps/405/kb405819.html. However, the instructions do not match what is available on the support page. Under return/exchange/refund , I have only the following options:

    • Duplicate command
    • Product not performed / works as expected
    • Incorrect update bought
    • Bought the wrong product/platform/language
    • Delivery problems
    • Cannot download the order
    • Wrong product delivered

    None of these options is correct as described in the article. I decided to discuss with the customer and the representative told me that all I had to do is shut down the upgrade and I could choose what platform to install on the first run. Really? The representative stated that CS5 included two disks, one for installation of Windows and the other for OS X. He assured me that I would have no problem to install CS5 on my Mac upgrade, although I've never installed CS3 on this machine.

    I am skeptical about this approach for two reasons: one, Adobe has never offered together Win and Mac disks for versions of CS. Two, when I go to the pre-order CS5, I need to make a choice between platforms.

    Has Adobe changed its mode of delivery of Creative Suite products? Are really included two disks of platform? If this is not the case, there are two things that must be accomplished:

    1. Article http://kb2.Adobe.com/CPS/405/kb405819.html must be corrected. Cannot perform the steps as described.
    2. Representatives of support for customers should be advised that they provide incorrect information regarding cross-platform upgrade procedures.

    Finally, I need information correct on how to go about upgrading my CS3 to CS5 Mac Windows. I buy an upgrade disc and use my CS3 serial number to install? I do some sort of return and if so, how?

    Thanks in advance to anyone from Adobe who is willing to take the time to answer my question.

    Line background here, you need to call Adobe to do this. A cross-platform swap is possible only for the current versions.

    What you need to call and tell them that you want to upgrade Windows CS3 to CS5 Mac. It's as simple as that.

    Bob

  • Mobile suddenly stops the post 10 ios upgrade

    My iphone6 intermittently stop unexpectedly post the upgrade to ios10.sometimes the phone is too slow to react. Can someone help me on this?

    Hello surehsusin,

    Welcome to Apple Support communities.

    I see that your iPhone 6 to stop intermittently, unexpectedly after updating to iOS 10, and the iPhone is slow to respond. I certainly wouldn't want that happy to my iPhone, and I want you to be able to rely on your device. I can help you with this problem.

    Since you just updated to iOS 10, I take a look at the App Store and ensure that your applications have the latest updates. After a new version of the iOS software, developers will often release new versions app measure compatibility improvements.

    Please follow these steps:

    1. Open the App Store and press updates.
    2. If updates are available, click all to update.
    3. If requested, enter your Apple ID.

    Then please reboot your iPhone, iPad or iPod touchand test to see if you get the same result with the iPhone intermittently closing.

    All the best.

  • El Capitan 10.11.4(5 & 6) upgrade question

    I have an iMac 2010 (3.2 Ghz Intel Core i3, 4 GB 1333 Mhz DDR3, 1 TB HDD - 485 GB free) that runs quite happily El Capitan 10.11.3

    Unfortunately, trying to upgrade to 10.11.4 gave me the white screen of death white.  No hassle, time machine backup, don't try again, no question of devices attached, even.

    Waited for the release of 10.11.5 and 10.11.6 and have the same problem again.  Equipment of diagnosis showed no problems and has even downgrading to 10.11.3 and 10.11.2 and update go here has not solved the problem.

    Has anyone struck this problem and solved?

    Thank you very much!

    I suggest to download the Combo update and try it.

    Download OS X El Capitan 10.11.6 Combo Update - Apple Support

  • I'm not allowed to post image with my question.  Why?

    I'm trying to post a question on the use sumifs instead of PivotTables in number, but if I paste a picture of the worksheet I get this message when I try to post my question: you are not allowed to create or update this content

    I am writing a new question.  Why am I in finger out and prevented from asking my question?

    Have you tried more than once.   I met a similar situation this morning who disappeared when I repeated the position.

  • upgrade question

    I'm still running 10.7.5.  Is this OK to upgrade to the latest version, or should I go each on the order of victory until I'm there?

    Depends, what year and model Mac do you have?

    To find out the info on your system,
    Click on the Apple symbol in the upper left of the menu bar main of OS X. A drop down menu appears.
    Click on about this Mac. A small popup window will appear. This gives you basic information as what version of Mac OS X to your iMac is running, the speed of the processor of your iMac, and the amount of RAM is installed.
    Click on the button that says more information.
    One more great window pops up that gives you a complete overview of the hardware specifications of your iMac.
    Select all the info and copy / paste this into another answer to this post, edition serial number of your iMac before actually posting the answer.
    This will tell us all about your iMac so that we can begin to help with your problems of iMac.

  • Pavilion 15-ab150sa: HP - Pavilion 15-ab150sa 15.6 "laptop RAM UPGRADE QUESTION

    It is said in the task manager that one slot free, I was just wondering if I could upgrade the laptop to 16 GB. Laptops have already been 1x8gb.

    Can my all new laptop handle it?

    Thank you very much, and best wishes,

    Mr. Hayle.

    Unfortunately, HP has not posted a manual for your specific model. The Star Wars thing is the series of 15 t-ab100 and the same physical case and the layout, just Intel AMD not. There is a forum for active discussion on the model of Star Wars and we know by experience of the user, it can be upgraded to 16 gigs and it also comes with a single module of 8 GB and an open slot.

    I think this might be your manual, even if it is found under the designation 15z-ab000, A8-7410 processor and the plug and the configuration described in the manual seem to be the same as yours:

    Manual

    It is said expressly:

    Supports up to 16 GB of RAM in the following configurations.

    I do not work for HP. I am a user final colleague who has some knowledge based on fact that for a few years. I never came across a computer that will a 8 GB module and has a slot for memory that will not accept a second module of 8 GB for a total of 16 concerts. If you buy the 8 GB module and it doesn't work I'll buy it from you for a reasonable current retail value. Just PM me.

    Note that this upgrade memory isn't a thing authorized for mutual assistance. The warranty may or may not remain intact.

    Also be aware that the upgrade from 8 GB to 16 GB does not alter the performance of the machine much, if at all for the majority of computer users and could well be a waste of money. But if you do heavy photo or video production work, drop the pieces of music or compile large batches of the Code you can use 16 gigs successfully. Same game didn't really need more than 8 GB, however.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Maybe you are looking for

  • Research of network drivers

    Hello I am trying to download the network drivers for a HP Probook 450 (only blutooth is recognized by Windows), but the site does not work for me. I found my cell phone and the version here: http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryter

  • Microsoft Works 8 has stopped working

    MS Works 8 no longer works.  I get an error saying "the specified Module could not be found. msls2.dll.How can I fix it?

  • PROBLEM WITH CONNECTION FLAT SCREEN

    WHEN I PUT COMPUTER ON SAFEMODE FLAT SCREEN WORKS BUT ON THE NORMAL WORK WHICH IT SAYS OUT OF RANGE BUT IVE PUT THE RESOLUTIONS SETTING THE LOWEST AND HIGHEST AND STILL NOTHING WHAT CAN DO TO MAKE IT WORK FOR MY DEST TOP

  • Confused about card video card

    I am shopping for a XPS 8500 - and was confused because the specifications of the video card on the Dell site match the specifications for the same card - not brand and model I see elsewhere - the Dell card is better. I tried the Dell chat but only g

  • Windows 7 Workgroup + NAS. Suddenly requires no username and password

    I just added an extra PC for our Windows 7 workgroup. All of a sudden. the NAS are not accessible by anyone without a user name and password. They do not exist, so on Monday 5 personal will be unable to work! All sharing the advanced parameter settin