Post installation (is this possible?) ISE IP address change
I encountered a strange problem. I have a fresh (on VMware) ISE of test installation upward and running in my lab. After a few days, I realized that I had to change the IP address of the ISE test. I went through the guides of the admin and forum messages, but there is no instructions on how to change the IP address of the ISE, once completed the initial installation.
Anyone able to point me to something that I may have missed? Or... is this one of those times when the deployment of 'version' 1.0 product that I just need to rebuild from the ground up to "version 2.0"?
Thanks in advance.
You need to connect to the console, using ssh. Then, you have a CLI to change the IP address or addresses to other interfaces. ISE user guide section has a document describing the controls. Note: after changing the IP enforcement ISE will be restarted automatically.
Tags: Cisco Security
Similar Questions
-
Well, then I want to get a new drive hard but with a greater capacity. Mine is 320GB and I want to upgrade to 500 GB. I have two laptops and one I would like to back up the operating system for a new installation (for the other computer hp g56-130sa laptop) for the new drive HARD must be installed.
Can it be done?Not for another laptop. If they were the exact same books perhaps, but even in this case this is only a possibility.
If you need to reinstall the operating system on your laptop, you have two choices. The first and the best choice is to contact HP directly and try to get the recovery disc specific for this laptop. The second choice is to buy a genuine Windows 7 installation disc.
I suggest that you contact HP because it will be the best solution (and much cheaper). If you are in the United States / Canada, give them a call at 1-800-474-6836 and talk to a representative for the recovery disc for this laptop. If you are outside this area, you will need to go to www.hp.com/support to find contact information.
-
I get emails from multiple email addresses and would like to see them all in one place instead of having to click 5 different folders to see what's new in each of them. Is this possible? Any help is appreciated!
Question in 2014
How can I read my incoming e-mails in a single folder? As I do in Live mail and Outlook express.
https://support.Mozilla.org/en-us/questions/1009047Looks like you need.
TB - 38, 3 Win10-PC
-
Filing of bookmarks is heavy. With Firefox, I star an address. Then I opened organize bookmarks to change the name and put it in a folder. I want to highlight and drag and right click set I want to change. Is this possible? in English
You can click now yellow highlighted the star a second element to open the dialog box "edit this bookmark".
-
I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8. I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!
You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.
(138456)
-
Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?
Hello
Hope that helps!
Kind regards
Sheena
-
you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?
Right click on the file Setup.exe and choose Properties option.
Then click on the Compatibility tab.
The value of the Windows 7 operating system and check.
See the link below:
-
Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.
Firefox 4 records the previous session.
You can use "Firefox > history > restore previous Session" for the previous session.
There is also a button 'Restore previous Session' on the default on: Home home page.Another possibility is to use:
- Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.
You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.
- browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
- browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
- browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
- browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart
To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
If you see a warning then you can confirm that you want to access this page. -
Create a disc of the Encyclopedia Britannica, which is designed for up to Windows XP with Vista work. Is this possible?
Hi Silas Martin,
I have not used Britannica for many years now, but I suppose there is a program of "installation"? If so, try compatibility mode.
1 / locate the setup.exe (or install file) for the program of Britannica
2 / right click on the file setup.exe or install.exe, and in the drop-down menu, select Properties.
3 / in the Properties window, click the Compatibility tab
4 / on the Compatibility tab place a 'TICK' in the box beside the box "run this program in compatibility mode for", then select the operating system Windows XP (Service Pack 3). This should automatically appear in the box under the run this program in compatibility mode for option. If Windows XP is not visible, then click on the arrow down to see a selection of the available operating system options.
5 / click OK
6 / the installation program will now begin to install the program in compatibility mode for Windows XP
7 / once done, you should be able to run the program as if you were using Windows XP
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk; Web: http://xphelpandsupport.mvps.org; Web: http://vistasupport.mvps.org; Web: http://www.silversurfer-guide.com
-
Different permission on Cisco ISE Mac address format
Dear all,
I have problem with my Cisco ISE,
It's design:
ISE - Core switch - 3Com - PC user
My case:
Authorization is based on Active Directory, and Mac address
The user with PC connecting to 3Com swtich Deny by ISE but is the Mac of the Format address is different with Cisco.
Cisco MAC address format: XX
3Com MAC address format: XXXX-XXXX-XXXX
3Com switch type is TRICOM 4210 26 - PORT.
Someone at - it experience with this? and how can change the mac address format in 3Com for user authorized by Cisco ISE.
Note:
Active Directory-based authorization is not problem with 3Com Switch.
From my experience, produces different is mac address of a different size, so this case not only for 3Com Switch.
Thank you
Arika Wahyono
Hello. Authentication using "work around the Mac address" is not a standard feature. The seller do differently. I do not think that this could work, but even if this is possible the solution will be not reliable because it is not standard basic.
-
Hello
I am a photographer, Subscribe to CC in Photoshop and Lightroom CC pour €11.90 per month. I would like to install these applications on a second post. It's possible with this subscription? If not, what to do?
Thank you pour your answers.
Hi Maurice.
According to the EULA, you can install CC on 2 computers, but you can use them at the same time.
I would refer to the instructions on the link below for the installation.
Download and install Adobe Creative Cloud apps
Hope this will solve your problem.
Kind regards
Hervé Khare
-
Problem with the CentOS post-installation Script
Good afternoon
I use VMware Studio 2.6 to create a couple of CentOS 6.2 VMs. A virtual machine is perfect, the other does not work it's "Script of post-installation of Application." I find it a little strange because if I just copy the script from Studio in the virtual machine, it works fine. But not when I'm deployign the OVF. What?
The two CentOS systems are virtually the same. the only difference is in the FULL domain name and host name lines where I grep for different properties of the FVO.
Someone has ideas how to debug this? Thanks in advance. I've included the script to post below.
#! / bin/bash#################### post.sh sets up a new system with the required configuration## post.sh v1.0 - [email protected]##################### Variables - from the user entered in the OVF properties#FQDN = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | "cut-d" "'-f4"Hostname = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep new_hostname | cut-d ""'-f4 | cut d. "" - f1 "DOMAINNAME = "${FQDN #*.} '"IP_ADDR = "/ opt/vmware/share/vami/vami_ovf_process - p |" grep vami.ip0 | "cut-d" "'-f4"# Set SELINUX to disabledSED 's/SELINUX=.*/SELINUX=disabled/' / etc/selinux/config-iecho 0 >/selinux/apply# Set the host namesed-i "s/HOSTNAME=.*/HOSTNAME=$HOSTNAME/" sysconfigsed-i "s/DOMAINNAME=.*/DOMAINNAME=$DOMAINNAME/" sysconfigecho '$IP_ADDR $FQDN $HOSTNAME' > > / etc/hostshostname $HOSTNAMEservice network restartHmm. This does not resemble a script of post-installation for me at all. This script is run at the end of the installation, but the VM has not been deployed yet, so the properties of the FVO are likely not useful (they are only put in place at the time of the deployment, for the * user * unit and you do this during the compilation, like the * author * the device.) The network parameters that exist in the envionment of the author are almost certainly not this as an end user * deployment * unit is lilkely to use; their domain, dns, and network addresses certainly not will be yours). Also, you don't mention how this script "failed", that might help narrow down the cause. Look at the debug log and the postinstall.log and see if you can find the real cause of the error. But in all cases, property OVF stuff you make here is not part of the postinstall script. Instead, it looks more like something that belongs in a script firstboot, although VAMI already does most of what you do with networking.
-
I want below. Is this possible? If so, are there not any delay in sound?
The ATV will not support 2 connections Airplay, so your installation will not work. Using a wired projector will work. Also, it doesn't support video output wireless...
-
I would like to download all my past (songs) purchases that have been made under my accounts over the years. I remember only the different email address I used for these accounts. Is this possible?
Yes, but only in each account, you can download a purchase of Apple ID A Apple ID b. You can call Apple and explain why you need to do that, and maybe they can help.
Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.
Contact product support and tech: Contacting Apple for support and service - this includes
numbers of international calls...
Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.
-
Urgent please give me a Solution. I want to take backup of Active directory in Server 2008, Enterprise Edition. and I want to use this backup in Server 2008 R2. is this possible? If possible tell me that the process .it is a domain controller. If there is any tool? answer me. Thanks in advance.
That you were previously informed
Please post your question in Server TechNet Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Don
Maybe you are looking for
-
How can I get a newer version?
-
a member of the family broke his laptop but want to get his data off an SSD the model in question is a THNSNF256GRHS that has a likely LIF connector with a cable sheet to go to the motherboard. I'm looking to extract the data, but with no way obvious
-
I can't locate all channels with hybrid USB - Equium L100 TV Tuner
Hello I installed the software and the USB but I can't locate all channels. There is no signal.Help what can I do? Thank youTracy
-
Photoshop CS5 &; El Capitan
Hello I often use PS CS5, usually when using pictures in FCPX. Still, I Yosemite and have heard that el Capitan is problematic with CS5. What did you hear/experience? Are there updates to El Capitan, which may have solved these problems? The best Elm
-
Adding additional Ports Ethernet to the router EA6300
Friends, I have a setup of typical network with a cable modem in progress of execution to an EA6300 wireless router. The EA6300 also has a cable ports but I have 4 of those filled and I would like to extend it. I have an older Linksys ethernet hub, b