"Post work site" screen that appears when the computer is started

Similar Questions

• What is the big number at the top right of the screen that appears when units media center starts?

  What is the big number at the top right of the screen that appears when units media center starts?

  most likely the volume control
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Computer screen remains empty when the computer is started.

  I recently moved my computer in a another part of the House and when I got back everything was working properly.  I was in the middle of the removal of unused on my computer programs when I had a program not responding do not message.  All the icons have disappeared off the screen and the taskbar, but I could still see the background.  I shut down the computer manually becase Ctrl + alt + delete didn't work.  Now, when I turn the computer on the gateway screen comes up and the green bar when windows is preparing to start, but it loads a blank screen. The only visible thing on it is the mouse pointer.  I tried to use the windows vista operating cd but it wont run it.  Any ideas?

  No you can hear it running.  I would say that it was computer games that I uninstall and the wireless card that I used on it, now it is connected directly to the wireless router. Also, I forgot to mention in the post above that I had the computer on it two weeks and when I had it up and running in the other room windows defender came on wanting scanner, so I let it scan and then the antivirus software did a scan of the computer.  They both finished without any problems.  My antivirus (McAfee) software installed updates at the time wherever it froze.

  go to safe mode (press f8 when you turn on your pc) then preform scan using

  Malwarebyte s

  and get avast download or try the mcafee update after scaning above programs using

  then in safe mode go to msconfig by typing it in the search box of windows and enter presing. then prepare your computer to clean boot by disabling all startup items and non-windows services. then restart?

  See if it solves your problem?

• Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8?

  Original title: Desktop

  Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8 rather than having to go from the first layer redundant 'start-up '.

  In fact, if anyone can tell if there's a free windback to an earlier version of Windows (7) who has not all layers unnecessary and icons, I would be really grateful

  Your best bet is to switch to 8.1, that allows you to boot directly to the desktop, and then use a menu like debut8 to replace the old Start Menu and hide the side of the metro.

  If your computer comes with Win Pro 8, you may be able to demotion, otherwise, you will need to buy 7. Before you buy 7, I would recommend go to the computer manufacturer's website and see if there are any Windows 7 drivers for your computer. You may lose certain functions - sound, network, video full resolution - if there is no driver.

  The first option is easy and allows you to keep the improvements in performance and safety 8.

• Help - when I turn on my computer, the normal screens that appear before the login page and login page, are gone.

  The screen is just completely black, no response from any keys on the keyboard or click of the mouse.

  The computer was working fine earlier in the day. But when I turned it on again this night here, this problem arises.

  Help, please!

  Hello

  Method 1:

  I suggest to unplug external devices such as printers, scanners, etc. which are connected to the system, then restart the system and check if the problem is resolved.

  Method 2:

  I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

  Windows XP logon screen does not appear and the computer continuously restarts

  http://support.Microsoft.com/kb/310396

  Apart from that, I suggest you follow the steps mentioned in the article below.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  Method 3:

  If this does not help then, I suggest you do a system restore and check whether the problem is resolved. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Icons and black screen that appears when published the missing LMS

  Hello

  I tried to search online, but need some advice on how to solve a problem of publication I encounter.

  Captivate 7

  SCROM 1.2

  When I run a SWF file via my IE browser, I have no missing icons or black screen that appears. During the generation of the content to publish SWF with HTML5, it passes through successfully.

  When it is published through LMS, couple of slides in the length of the content, I am facing some missing icons and black screen. I read an article saying check on imsmanifest.xml that could help solve the problem. But watch and read the code, I am pretty well confused to determine what lack us here.

  Comments or the recommendation how I can solve this problem?

  Concerning

  AJ

  Publish your Cloud SCORM LMS SCORM online and test the functionality here.  If he plays as expected, the problem is with your own LMS and you must get their technical staff working on the problem.

• Age of Empires (collectors edition) nothing that appears when the disc inserted.

  Age of empires (collectors edition).
  nothing seems to be appearing when I insert the disc
  and I know not weather am I ment to happen something to download, a Web site or document? Help, please!

  You seem to have active AutoRun.  Click the start ORB, then type in AutoRun and press ENTER.

  A new box should appear, select the line of software and games, and use the drop-down list to select installation or execution of the program.  Click Save.

  Press the tab open on the DVD/CD drive and then close it (with your disk of Age of Empires, always in the drive)... now the installation option should appear.

  Enjoy the game!

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Is there a way to disable the handles that appear when the move tool is selected in Photoshop CC?

  I can see how it may be convenient, but sometimes I work with very small elements and the little square handles block my view. I know that I can just zoom in, but I'd rather have these alleys handles.

  

  

  Uncheck the box see the transformation Contols

• When the computer is started, get error message sistray has stopped working

  Original title: sistray has stopped working

  When I start my Pc, I get a sign that says "SisTray stopped working" and something like windows are looking for solutions, but whenever I turn it on, just the same sign. What should I do?

  Thank you.

  Hello

  1. what operating system do you use?

  2. don't you make changes to the computer?

  Method 1: Check in safe mode and the clean boot

  For the open procedure the computer in safe mode, open the site mentioned below:

  Start your computer in safe mode.

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

  If the problem does not persist in safe mode, try to start your computer in a clean boot.

  For the procedure to place the computer in a clean boot, open the site mentioned below:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Update the video driver

  Update driver by following the steps in the site mentioned below:

  Update a hardware driver that is not working properly.

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

• Vista desk top of page monitor screen remains black when the computer wakes mode standby

  Windows Vista Edition Home Premium

  Dell desktop

  Intel Q8200 @2.33 GHz processor

  6.00 GB RAM

  32-bit operating system

  Type of card ATI Radeon HD 3450

  Driver update has been installed without any problems.

  When my desk top comes out of fashion 'sleep' (using the mouse click), I hear my computer turns (beeps once and can hear the hard drive and fan), but can not get the screen on the monitor to display (rest is black). Can only crash the system to get everything back to normal. I searched in internet and microsoft forums but didn't find a solution. Please help, it seems that many others also have this problem without solution. I like to use "sleep" mode and do not want to resort to turning off the sleep mode option.

  Hello

  Please provide information for a better understanding of the issue.

  1. what was the recent change in hardware or software performed on the computer before the question?

  2. are you having the same problem when you Hibernate the computer?

  Check the display driver for power management problems.

  Method 1

  Check if allow this device to wake the computer is checked in the Device Manager.

  a. click Start, type Device Manager in the start search box and press ENTER.

  b. Select graphics cards, it will display your display driver, right click and select Properties.

  c. Select the power management tab.

  d. check the allow this device to wake the computer check box.

  e. repeat these steps for the network adapters and the mouse as well.

  If the problem is not solved then continue to.

  Method 2

  Remove both power on your computer and check to see if that fixes the problem.

  Reference:

  Change, create, or delete a power plan (scheme)

  Try to create another plan of the power of your computer and check if the problem persists.

  Power plans: frequently asked questions

  See also (additional links for more information),

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blank-screen-after-Vista-went-on-sleep-mode/b5e5693a-28a6-4391-b9ac-36d345d6a3b9?msgId=a464f2ec-0651-4E2F-8CB0-f546b09b0989

  Hope this helps

• Log on screen is displayed when the computer sleeps or battery operated

  I have a HP Elitebook 8470P running Windows 7 Pro. She put does not demand connection password. That works fine as long as I turned off the laptop and it starts the next time I use it. However, if I put the computer to sleep or unplug it, then run it on battery I get the login screens. It shows my administrative username and said that the account is locked. I click on that and a new page indicates my administrative username and says I'm connected. I then have to click on it to get to my office. Anyone know how to get rid of this problem? Thank you!

  Changing the way that the computer wakes from sleep?

• XP start screen flashes then restarts the computer (usually start in any mode, restarts just instantly)

  Hello

  My xp computer has stopped working completely for some unknown reason. Last Friday I took my girls login Thinkpoint virus successfully. Nobody is using the computer since then when my daughter connected today it froze after a bit of use. It restarted, and now it won't start at all. It shows the BIOS loading but then flashes the screen and loading XP restarts. If I try to reboot safe mode or use the last known good config that the computer still does not start XP.

  I already did the following:

  Check disk

  Bootcfg/Repair

  System recovery (the one where you will install a new XP (with OS CD started from) but hitting R instead)

  I am at a loss about what to do in addition to do a format/reinstall. There is no document import on this computer, but it would be better to do not reinstall.

  P.S. It's a Dell Precision 390. And he has a strange video card, DVI dual nVidia Quadro NVS 285. Ive never seen anything else like before.

  Thank you

  Hello

  (a) you can follow this link to perform a manual system restore & verify if you are able to start correctly on the desktop.

  How do I recover from a corrupted registry that prevents Windows XP startup

  (b) If you are able to boot to the desktop, you can run virus scan anonline again from the link below. If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.

  http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't access google when the computer is started to the top

  I get a page that covers the entire screen which is red and won't let me see the google search box

  I sent a response which says that it has been corrected, but when I turned off the computer and restarted the screen was covered with the same red box.
  There is a box that appears saying compatible Audit Add ons, but it goes and comes very quickly, with nothing to stop it or click it.
  Help
  Mike

  Try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to restore the values all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

• How can I find what I need at startup of the computer programs, I went to the System Configuration, but do not know what to uncheck to stop running when the computer is started

  I ran a report on my computer, in case of problems.  It detected that I needed to verify in the Configuration of the system on the programs that were running at the start of the computer.  I have several here I will list who is here, and maybe someone can tell me that I don't need at start-up.

  1 Microsoft Security by Microsoft

  2 updater Java (TM) Platform SE Auto by Sun Microsystems

  3 Localnet Express 3.0 - propel Software Corp. (Localnet is my provider and this express is supposed to help my computer go to websites faster)

  4 Roc_Roc_NT_unknown-AVG safe search (I was told I didn't need AVG antivirus, so I deleted it out)

  5. default manager by Microsoft

  6 adobe Acrobat from Adobe Systems

  7 adobe Reader by Adobe Systems

  8 AVG Tray-unknown

  I hope someone can help me with this takes 15 min for a loading site approx. 30 to load the game after I finally get it, then the game is frozen and won't do anything.  Even for all other sites, I'm at my wits end and don't know what to do.  I have dial up and Windows 7.  Just started having problems after getting this new service provider.

  Hello Wanda.

  One command, but lets see what we can do to whittle the list down. First, dial-up internet connection is slow, so keep that in mind that we work here.

  Second, almost all your startup programs are valid and advised to load at startup of Windows. Some possible changes:

  (1) If you need not a specific to Java, such as might have the game that you are trying to play, so you don't need to have it is launched at startup.

  (2) regarding the Adobe programs, why do you have Acrobat on your computer? Do you need to create PDF files? Adobe Reader which has many freeware alternatives that are faster, used to read PDF files. So if you need only to read PDF files, you can stop Acrobat from loading at startup.

  (3) other startup programs are all legitimate. And remember, just because you do not start a program at startup, does not mean that you cannot start later if you find that you don't need it.

  (4) the problems you encounter to "all sites that you visit" could be a function of malware. You don't have AVG Antivirus running on your computer just? I recommend do you a scan in depth and then put in quarantine and remove any infections it finds.

  (5) after you run the virus scan, I suggest that you try to download and run these two scanners. First MalwareBytes' Antimalware, here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html.  Secondly, SUPERAntiSpyware, here: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html. Quarantine and remove all infections they find.

  (6) after doing this, restart your computer and see how it works. Please post your results here, and if you have any questions during this process, post here and I'll help you. Let me know how you fare.

  Kind regards

  BearPup