Post your use of slower RAM (series 3 of Yoga)

Similar Questions

• FF using too much RAM and slow down

  FF uses too much RAM
  After I started FF, like 5 minutes later, use as a 1 GB of ram, and if I don't restart it, I push up to 3 GB ~ 4 GB of RAM used

  the article above has not helped
  updated to version beta and resolved

• Vista ultimate 64 bit uses do not RAM

  I'm running vista ultimate 64-bit with
  2 gf 8800 gtx
  8 GB ram
  AMD Athlon 64 x 2 6000 +.
  in the sidebar, that I'm running a counter that reads 8 gigs or ram and the use of carrots but my system never goes over the use of 3.5 GB is there some other settings, I need to change to my computer run at full capacity.

  Hello Holywood82002,

  Thank you for posting.  I have additional information for you.  I have a very similar setup as you do.  You are your system running at its full potential.  It is enough what will use all your resources of computers at a time.  Short run many graphic programs (Maya, 3d Studio Max and Photoshop), while Media Player (fully loaded with media) in the background and a game all at the same time (so I did), you won't exploit fully all 8 GB of ram at any given time.  I could barely within just 4 gigs.  The only reason why your system uses same 3.5 GB of ram is because SuperFetch Vista function caching your file exchange and frequently used programs in ram, which is very effective for memory management.

  HolyWood then, do not hesitate to smile because you have very good computer. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• On the use of the RAM and upgrade...

  Hi... iam using 4 GB ram in the 32-bit version of windows 7. .but it showing 2.53 usable... I want to make full use of... I goggled this question someone posted... Install the file named (http://www.tarfandestan.com/files/Patch-3-Windows-Vista-and-7.zip)... .with this software is not possible... ghoulish u explain to me...

  IAM using the s850 toshiba model...
  Thank you.

  This is a limitation of the 32-bit system.  ~1.5 concerts that are not available are probably used by your video card.

  I would not go that the software that you have no idea of what it contains.  It could easily contain malware.

• Svchost.exe file LocalSystemNetworkRestricted using too much RAM

  The file svchost.exe (LocalSystemNetworkRestricted) uses too much RAM, almost 1/2 of it.  There are also several svchost.exe files (no limit) and the indexer uses a lot of RAM too. I have already associated the indexer return. I suspect that it is the cause of my favorite right-click with windows Explorer.  I have 4 GB of RAM, small basic programs, file clean constantly and the computer is still slow.  How can I fix it?  Test/scan etc. ?  HELP.............................

  2computercrazy

  Hello

  Follow the steps below and check if that helps.

  Method: Scan the System File Checker.

  http://support.Microsoft.com/kb/929833

  Method 2: I suggest you to check the boot issue.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  Method 3:Follow the steps below to solve the problem

   1. click on start-> in start search, type "services.msc" (without the quotation marks) in the Open box and click OK.
  2. double-click on the service "Windows Update".
  3. click on the tab to open a session, please make sure that the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

  4. check if this function has been activated on the hardware profile listed. If this isn't the case, please click the Enable button to enable it.
  5. click on the "Général" tab Make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Status of Service" to start the service.
  6. repeat the above steps with the other service: (BITS) Background Intelligent Transfer Service

  Method 4: I suggest that you want to run a virus scan on your computer.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I suggest you to provide us with the information from the event log.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

• Great use of the RAM in the new MacBook Air?

  It's the first time I've owned a Mac and it is currently a week. I use every day since it arrived (watching videos, using the word and research). Recently, I found my way on activity monitor, 7.5 GB of physical memory to 8 GB was in use - 3 GB of this was kernel_task. I stopped all open windows, so it is now 1.11 GB, but it still seems way too high. That said, I know nothing of what it should be, so I would like to know if this is normal? If this is not the case, what I can do to lower the kernel_task? (In addition, the kernel_task is GB 25,42 disk tab, should I worry?)

  Set apart this, nearly half of the RAM is still in use and I would like to know if it's too normal - for such a new mac.

  The system was not slowed down at all, while I use it, but if there is a problem, I would like to know before it becomes a problem. If the problem comes from the manufacturer and not how I use the mac, I of the ofc as contact with Apple.

  Features: 8 GB of RAM, Intel Core i5, 256SSD

  Captain El in OS X, version 10.11.4

  Thank you!

  PROCHLOR wrote:

  Set apart this, nearly half of the RAM is still in use and I would like to know if it's too normal - for such a new mac.

  Yes, it's normal.  On operating systems newer, the OSX tries to use as much RAM is available for maximum efficiency.

  The new setting is the PRESSURE.  If it's Green, everything is good.  If she turns to orange or red, then there may be issues that need to be addressed.

  Ciao.

  Addendum: You can find this informative Apple support article:

  https://support.Apple.com/en-us/HT201464

• Extension of RAM series Satellite M40X

  Hello

  I am using Toshiba Satellite M40X series and ask yourself what is the limit of the extension of RAM on my laptop?

  According to my laptop manual 1DIMM slot can extended up to 1 GB but I don't know how many slots is there.

  Thank you

  I found the information to follow up on the Satellite M40x:

  -This model laptop can handle with 1536 MB max
  -Two locations are available, but only is scalable, it must be the slot on the bottom side
  -512 MB in a slot
  -You can use additional 1 GB of RAM compatible module is 1024Mo PC2700 (PA3313U-1M1G)

  Good luck!

• Operating system uses too much ram

  

  My operating system uses too much ram I don't know why?

  as shown in the picture...

  I just open chrome bt still its with 1.2 GB of ram of 2 GB...

  I don't know what the problem...

  I quit also all unnecessary applications to windows startup...

  the problem persists...

  Help, please...

  Thanks in advance...

  Say hello to new parthcool.

  It is a normal behavior of a browser like Chrome or Firefox.  You run several tabs in Chrome?  Chrome treats each tab as a separate instance of the browser and for this purpose a separate process.  It is a good feature because it means that a hanging web page will not (usually) bring down the browser everything.  However, this means that Chrome uses a lot of RAM.

  Using intensive plugins memory within these tabs, like Adobe Flash, will greatly increase the amount of memory used.

  Here is a screencap of my own memory used within Chrome.  I did open Chrome before that and I currently have seven tabs.  This represents about 400 MB with pages containing the text for most.

  

  Unfortunately, because this is a consequence of the features of the browser itself, there are only a few options to solve the problem.  You can try to minimize the amount of memory that Chrome uses by following the instructions in this article.

  Your second option is to upgrade your laptop to include more memory.  You also extend the usefulness of your laptop.  If you want to go this route, I need your product number to locate the appropriate parts and information.  Follow this document to locate the product number.

  Finally, and this is probably the most effective solution, is to use the Ready Boost of the window function.  Ready Boost allows you to use Flash memory, such as a USB key, as secondary memory for your computer.  Here's a great thread in which explains how to use Ready Boost.

  I hope you find this useful parthcool; have a great day!

• How to check the use of the ram?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

  What are you really trying to do?

  See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"

• can I use all in one series printer series to efax instead of fax data modem?

  Hello
  Can I use 'everything in a series' printers (printer, scanner, copier and Fax) to receive faxes in my Inbox? i.e. efax, otherwise let me know on the hardware that is used to receive faxes in computer science.

  You can get an Efax service but it's not free.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Application of pilot - Post your request here

  Hi all

  Please provide your request Driver here with the following details

  System model number: Eg-Vostro 230

  OS Win Xp / Vista / 7 / 8:

  32-bit / 64-bit.

  What are the drivers that you have already installed on your own

  In the other devices section, what is next? in devices with VEN ID and ID DEV Manager

  Example - network controller has?

  Please give me the network controller device ID, follow the instructions below to get the device ID;

  (1) in the Device Manager, right-click on network controller

  2) click Properties.

  3) click Details tab.

  (4) choose Hardware IDS in the menu drop-down

  5) click anyone in the list - press Ctrl + A--> Ctrl + C (copy)

  6) paste in the forum

  Example-

  PCI\VEN_8086 & DEV_4232 & SUBSYS_13218086 & REV_00
  PCI\VEN_8086 & DEV_4232 & SUBSYS_13218086
  PCI\VEN_8086 & DEV_4232 & CC_028000
  PCI\VEN_8086 & DEV_4232 & CC_0280

  DO NOT POST YOUR SERVICE NUMBER SYSTEM FOR REASONS OF PRIVACY AND TERMS OF USE *.

  I'll try my best to answer as soon as possible, otherwise other Rockstars and Dell Forum Mods will be there to respond, please wait for a min of 24 hrs front to re-post an update. Thank you.

  TPLTPLDELL

  Hi VeejDeej - tour desk model Vostro 420; Vista 32-bit operating system. Other devices SM Bus controller! "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click on reinstall the driver. "Hardware ID: PCI VEN_8086 & DEV_3A30 & SUBSYS_02821028 & REV_00
  PCI\VEN_8086 & DEV_3A30 & SUBSYS_02821028
  PCI\VEN_8086 & DEV_3A30 & CC_0C0500
  PCI\VEN_8086 & DEV_3A30 & CC_0C05

  Install the drivers in this order:

  System software:
  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=XVX9H&FILEID=2731093920&osCode=WLH&ProductCode=Vostro-420&LanguageCode=en&CategoryID=UT

  Chip set:
  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=009Y3&FILEID=2731104957&osCode=WLH&ProductCode=Vostro-420&LanguageCode=en&CategoryID=cs

• is an HTTP Post possible using webworks/widget SDK or what I should use Java widget?

  Hi all

  I use webworks and widget SDK to make a simple application where I need to do the following

  (1) open a site called www.mytest.com

  (2) display the following parameters with the request to open the site

  Login = true

  UserID = one

  password = b

  Is this possible using BlackBerry Widget SDK? I looked at the blackberry.invoke.BrowserArguments and I do not think that it allows that.

   

  Is this a limitation to the use of webworks? If so, that is the only alternative is to develop a widget of java and use the browser2 field?

   

  Thank you

  Parag

  Yes, you can...

  When you make an Ajax request, on your call to the open() of XMLHttpRequest objects method use the following:

  XMLHTTP. Send ('post', URL, true);

  XMLHTTP. Send (post_string);

  WHERE

  'post': your request method

  URL: the url to which the http request you

  true: to make it asynchronous (Note: this is the default behavior)

  post_string: is a urlencoded string containing all your post variables and their values like this

  "xc =" + encodeURI (element.value) + '& xd =' + encodeURI (element2.value)...

  You should be fine here as long as you know how to create an XMLHttpRequest object and can use GET, this should be familiar.

• msmpeg2vdec.dll explorer.exe is originally to use all my RAM and disk i/o

  Hello

  When opening some folders (just by clicking on the file in a different folder is causing the problem too) that contain media files on my system it causes explorer.exe use all my RAM and max on my disk i/o.

  Process using explore and RamMap I see that msmpeg2vdec.dll on my system is causing explorer.exe use all my RAM and disk i/o.

  RamMap using I see the entire file 6 GB + is attempted to be loaded into memory to live. :(

  Full stack of the msmpeg2vdec.dll! Live ThreadedDecode wire then it tries to load the file into memory:

  Ntoskrnl.exe! KiSwapContext + 0x7a
  Ntoskrnl.exe! KiCommitThreadWait + 0x1d2
  Ntoskrnl.exe! KeWaitForSingleObject + 0x19f
  Ntoskrnl.exe! KiSuspendThread + 0 x 74
  Ntoskrnl.exe! KiDeliverApc + 0 x 211
  Ntoskrnl.exe! KiCommitThreadWait + 0x3dd
  Ntoskrnl.exe! KeWaitForMultipleObjects + 0 x 271
  Ntoskrnl.exe! ObpWaitForMultipleObjects + 0 x 294
  Ntoskrnl.exe! NtWaitForMultipleObjects + 0xe5
  Ntoskrnl.exe! KiSystemServiceCopyEnd + 0x13
  ntdll.dll. ZwWaitForMultipleObjects + 0xa
  KERNELBASE.dll! WaitForMultipleObjectsEx + 0xe8
  Kernel32.dll! WaitForMultipleObjects + 0xb0
  msmpeg2vdec.dll! CMFSampleList::WaitForMoreData + 0x2e
  msmpeg2vdec.dll! CH264DecoderSoftware::GetDataFromStream + 0xc2
  msmpeg2vdec.dll! CCoreH264Decoder::GetMoreData + 0x4d
  msmpeg2vdec.dll! GlobalGetMoreData + 0x13
  msmpeg2vdec.dll! getMoreData + 0x1e8
  msmpeg2vdec.dll! GetAnnexbNALUNoEncrypt + 0x33d
  msmpeg2vdec.dll! Parse_One_Slice_Nalu + 0xae
  msmpeg2vdec.dll! Parse_Nalu_Till_Meet_New_Pic + 0x5d
  msmpeg2vdec.dll! Task_PED + 0 x 184
  msmpeg2vdec.dll! StageExecute_PED + 0 x 91
  msmpeg2vdec.dll! TaskScheduler_FindAndExecuteTask + 0x12c
  msmpeg2vdec.dll! ThreadedDecode + 0 x 92
  Kernel32.dll! BaseThreadInitThunk + 0xd
  ntdll.dll. RtlUserThreadStart + 0x1d

  I know it's the msmpeg2vdec.dll! ThreadedDecode thread because if I hang just this thread into explorer.exe it stops the disk i/o and freezes at some current RAM usage, it should be. And if I kill the thread all my RAM is released.

  Oddly enough I can open the file just fine itself very well in an application and have no question also. Only when you try to display the file in the Explorer himself this problem occurs.

  Thanks for the help,

  Will be

  PS: Why does my mouse cursor disappeared when editing this post? Boring!

  It looks like the Explorer tent to generate preview thumbnails of the videos. You can try to disable the genration of the thumbnails in the options of Solution Explorer. Now, the Explorer shows only the icon.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Using the two RAM slots

  I have 2 RAM slots. I have 1 GB installed on one of these locations.

  A few months before that I installed a 1 GB of RAM on another location (I gave my CPU to the shop actually to install) and it worked very well.

  I had some problems with my PC so I formatted the entire hard drive and reinstalled my Windows 8. But now, he uses only one slot.

  So please tell me that

  How can I use the two RAM slots?

  

  (Task Manager)

  

  (My computer properties)

  Unplug ALL power - then remove the memory - and then put back them in (this process
  is known as the relocation and will help if there is corrosion or other question contact). If it's been
  contributes not to remove both once again put the one who was in the second slot in the first location to
  see if it actually works. If this does not work, you have a bad memory module. If so, put the
  another return to the second slot. If it works the problem solved. Otherwise you may have a bad
  memory slot so trying combinations using other passers-by.

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Linux 32-bit. Abobe plug-in already installed. Always get looks like to your using an older version of Firefox. All talk of 64, I'm Linux 32. Need 2 plug-ins?

  For a long time keep saying looks like to your using an older version of Firefox. Several times I tried to install Adobe Flash plug-in, both with Firefox and the Adobe site. I'm on Linux 32-bit, 64 no, details, that I find are for 64 bit.
  https://support.Mozilla.org/en-us/questions/759565
  I think that the problem might be here, but I do not see the solution for 32 bit. Looks like only maybe 2 plug-ins? Anyway I need help.
  It is a problem with all the extra steps with the question you can imagine. I tried from scratch with Firefox, not working, more like 52 card pick up... if you know this game.
  I want a solution if you have a. Thank you.

  I had the problem solved. Thank you for your help. I had to get help from an engineer, I know. It's fast enough, but it looked like he deleted the old and installed the new and it seemed that perhaps the launch could have the issue? Not exactly, it's almost as if the launch was set for the old version... but don't want to send someone on the cause of the bad way, I don't know, but he later installed to firefox 38.1 or another... the 29. SOLVED. Thank you for taking the time to help. It was frustrating problem.