Poster works does not as expected with Adobe CS5

I've finally updated to OS X on an early 2009 Mac Pro Quad Core. I have two screens: a 20 "Apple Cinema and a Samsung Syncmaster. Previously, always with Snow Leopard, I had no problem with the implementation of my menus, panels, etc on the Samsung, thus leaving my film clean and only to view the picture or painting under development. It's a great ploy.

But now, I can't have my workspace (menus, panels and so on) to "stick" to the Samsung. Instead, they insist on layering anything I'm working on the cinema, which is now difficult to see behind all the clutter menus and panels.

I tried to move this to the Samsung, and I saved the arrangement as a new workspace. But the next time and so on, I opened Photoshop, all the menus were back on my film. It is a problem, I expected little, all the problems you may have. But it is serious because I'm not keen on having to pass all the other screen before starting work. In addition, it could be the cause? None of the existing workspaces or those custom made displays on the second monitor except if moved manually.

I'd appreciate responses as to why this is happening. Thank you

-Try to reset memory NVRAM/PRAM and SMC

MacIntel: Reset of the controller (SMC) system management

Tags: Mac

Similar Questions

  • HTTP POST works does not as expected

    I can't understand why the POST with data works when I use Firefox, but not when sent from the BlackBerry. The only difference seems to be that the BlackBerry less sends the headers, but it's all legal HTTP.

    It's TCP data are sent to the server (from recorder package):

    ----------------------------------

    HTTP/1.1 POST/page
    Host: localhost
    Connection: close
    Content-Length: 8

    test = abc

    ----------------------------------

    That sounds about right. However, the Web Server table $_POST (PHP) is empty.

    Code follows:

         HttpConnection c = (HttpConnection)Connector.open(connectionString);
            c.setRequestMethod(HttpConnection.POST);
    
            DataOutputStream out = c.openDataOutputStream();
            URLEncodedPostData postData = new URLEncodedPostData(URLEncodedPostData.DEFAULT_CHARSET, true);
            postData.append("test", "abc");
    
            System.out.println("requestData: " + new String(postData.getBytes()));
            out.write(postData.getBytes());
            //out.flush();
    
            c.getResponseCode();
    
            InputStream is = c.openDataInputStream();
            LineReader lr = new LineReader(is);
    
            while(true)
            {
                try
                {
                    byte[] arr = lr.readLine();
                    System.out.println("Line: " + new String(arr));
                }
                catch(EOFException e) { break; }
            }
    

    Everyone knows about similar problems using POST?

    See you soon,.

    Pav

    Update:

    -J' tried this on 2 servers Web (Apache + PHP) unrelated, both have the same problem.

    SOLVED!

    I tried to put different headers that Firefox sends inside the request of BB and it does the job:

    c.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");

    Hope it saves someone out there a lot of frustration :-)

  • Facebook, Gmail and MétéoMédia works does not for me with the last update, even in safe mode

    That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.

    All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.

    I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.

    Hello

    Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
    Note: This will be you temporarily disconnect all sites, you're connected to.
    To clear the cache and cookies to do the following:

    1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    2. Under "Time range to clear", select "all".
    3. Now, click the arrow next to details to toggle the active details list.
    4. In the list of details, see the Cache and Cookies and uncheck everything.
    5. Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

    __________________________________________________________________

    Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    This will remove not essential info unless you check the box "delete all my personal data too.

    Please report back to see if this helped you!

    Thank you.

  • Filling of camera works does not as expected in Android OS 4.0

    Hi all

    Recently upgraded to Ice Cream Sandwich (Android 4.0) on my model of Motorola Xoom Wi - Fi. Love it so far. I seem to have a new problem trying to create a camera effect fill of any kind. Steps to repro:

    • Create any type of layer
    • Press on the '&' > type 'bridge camera '.
    • Try taking a picture; PS Edit then ends in a loop of treatment (with the four squares to the right animation)

    If I try to use the 'back' button Android, I can go back to the Android home screen, and then re - enter PS Touch, who then proceeds to ask me if I want to save my snapshot (which is basically empty). I type any option and everything goes as usual (less PS touch do not take the picture).

    I suspect it has to do with Ice Cream Sandwich and the new drivers for the camera of the Xoom. I tried uninstalling and reinstalling PS Touch that does not solve the problem.

    Other that that, I have not found something else wrong while using PS touch under Ice Cream Sandwich. I notice a very little bit of performance increase also.

    Just thought that I let you know and see if anyone else can repro.

    Version 1.1.1 fixes all my problems. Fonts are back, selections so that work now complete camera very well. Yay!

  • Backup of Windows 7 - change the settings - works does not as expected

    I'm trying to configure the backup of Windows 7 by using the "Change settings" option, but when I click on the link, all I get is a the Explorer window showing the contents of c:\Windows\System32

    Same thing if I click on the link 'manage space '.

    What I am doing wrong? or is it a mistake?

    Had the same prob, winlocker and shredder in the context menu, uninstalled winlocker and voila, backup now works.
    So, try to uninstall the software that hangs in the context menu (the menu "right click") and see if it works. Not interested in why at that time [is really starting to enjoy my Kubuntu box]

  • newText works does not as expected

    Hello all,.

    I am using formCalc.

    My form has a drop-down list box allows this custom text entry. On the change event is a script as follows:

    SubformRecap.TableLiabilityRecap.Row [13]. Cell [1] = xfa.event.newText

    The custom text entered only works when the user:

    • start typing without displaying the menu choices drop-down or completely erases the text of an unwanted choice field
    • then, type the custom text
    • AND then press ENTER

      The script fails to capture the newText if ONE of the following actions occurs

      • does not completely erase the contents of the field drop-down box
      • or highlights and types on the highlighted text
      • or, use TAB instead of ENTRY when you have finished typing

      When it fails the following text/integer appears in the referenced field: 1

      I have limited user so I guess I could train, however, I would like to avoid that if possible. It's a great form and TAB the norm for the entry and exit of the fields. People use it on their laptops in the field - oddities like this in order to have a major nuisance.

      Is the change the right event? Is there a way to enter (ENTER virtual) script?

      Thanks in advance!

      Stephen

      Well, this problem seems interesting... I tried to rebuild, but nothing never is, for me it works in any case so far.

    • handheld at 1 pixel brush works does not as expected...

      Hello everyone :-)

      When I try to draw a simple freehandline with the tool draw we get this before I release the mouse button:

      Outline 1.jpg
      That's how I expect the line to be in the final drawing.

      But instead I get this so after releasing the mouse button:

      Outline 2.jpg

      I'm using this brush settings:

      Brush Settings.jpg

      So he must produce a solid rounded 1 pixel brush stroke... In Illustrator CS6 this worked as expected.

      What I am doing wrong? :-o

      All apreaciated advice! :-)


      Have a good day, cyan68

      "Einfach" means "without a brush.

      But: the Brush tool will not work without a brush, he always apply a brush.

      The pencil tool is what you want. Really.

      It works exactly like the Brush tool, but without having to apply a brush.

    • Events in Subvi works does not as expected

      Hi, I'm reposting this question because my previous one did not lead to a satisfactory conclusion.

      I enclose my Vi which do not work as expected. If I remove a Subvi and its controls of 3 partners and two indicators, it works fine, but when I add two screws SUB, it's messy. I'm learning in this way, I don't know it can be done a lot of other ways, but please help me find the problem, do it this way in my final MainVi, I would use Live 8 such void. Thanks.

      Your main problem is the FLOW OF DATA.  A loop can not browse all what it has not completed.  So, as you have, you must have the two structures of event execture before you can go back to look for the next event.  So if you insist on having these subVIs, they must be in separate loops.

      BTW, you can get away with a single Subvi.  Go to the properties of VI and make incoming (preallocated clone).  Then, each call to your Subvi has its own memory space.  Much easier to maintain this mode.

      And I know you said you didn't want alternatives, but here's how you can do it with a unique structure in your main loop.

    • Windows 7 homegroup starter tries to connect to the other win 7 homegroup not working does not as expected

      I have two samsung n140 NetBook, both come with Windows 7 starter, I try to get things homegroup networking.

      I have set up with the default values at the same time to share the photo, video files etc under homegroup sharing.

      He was asked to create a password for homegoup I did it (could have come because I have a NetBook connected initially to a pc running win 7 ultimate, which is where I created a homegroup password but this pc is no longer connected to the network, it's just two samsung netbooks)

      in any case when I connected this other netbook with the first he asked me the homegroup password that was entered successfully by me. However, nothing has been free since. These two netbooks running win7 are the only PCs in my home group.

      Ive managed to get to a point where in the record of the house band that netbook names are displayed in eachothers homegroup however is listed in network for the group shares residential eachother trying to access the network.

      Can I cannect for both computers on the network in the way outdated by sharing folders and access the network folder in my network places and can read and write, but not in the home group.

      Homegroup is where I want to control networking not by any other means, I would be very grateful if someone can point me in the right direction please or if its win 7 starter limit myself from network access to the homegroup.

      Thank you very much

      Hey fatfei,

      Welcome to the Microsoft Answers site.

      I want to erase some of the basics of networking in Windows 7 Starter edition.

      You cannot create a homegroup to a computer running Windows 7 Starter Edition. You can reach only a HomeGroup existing of the starter edition.
      This must be one of the restrictions placed on you while trying to connect the two starter edition of Windows 7 homegroup.

      So the only option left out here is upgraded to another version of Windows 7 that supports creating HomeGroup via Windows Anytime Upgrade or stick to the way they are connected at present.

      For more information, please read this article.

      Networking in Windows 7 Starter
      http://Windows.Microsoft.com/en-us/Windows7/networking-in-Windows-7-Starter

      Homegroup: frequently asked questions
      http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

      Kind regards

      Shinmila H - Microsoft Support

      Visit our Microsoft answers feedback Forum and let us know what you think.

    • Listagg works does not in mview with fast refresh on commit?

      Version Info:

      Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

      PL/SQL Release 11.2.0.3.0 - Production

      CORE Production 11.2.0.3.0

      AMT for 64-bit Windows: Version 11.2.0.3.0 - Production

      NLSRTL Version 11.2.0.3.0 - Production

      I have a materialized view that is defined as fast refresh on validation and includes a call to listagg. The update goes as planned, but the value of the column that is created by using the listagg not updated unless I have make an explicit refresh. I was able to recreate the problem with a simple case, pasted below. Someone knows how to fix this?

      Thank you!

      -Tom

      Test scenario follows...

      SQL> create table codes (
        2       id number primary key,
        3       product varchar2(10) not null,
        4       code varchar2(10) not null);
      
      Table created.
      
      SQL> create materialized view log on codes with rowid, sequence (product, code) including new values;
      
      Materialized view log created.
      
      SQL> create materialized view code_agg_mv
        2        refresh fast on commit
        3        with rowid
        4        as
        5  select c.product
        6        , listagg(c.code, ',') within group (order by c.code) codes
        7        , count(*) cnt
        8    from codes c
        9   group by c.product;
      
      Materialized view created.
      
      SQL> truncate table mv_capabilities_table;
      
      Table truncated.
      
      SQL> begin
        2       dbms_mview.explain_mview('CODE_AGG_MV');
        3       commit;
        4  end;
        5  /
      
      PL/SQL procedure successfully completed.
      
      SQL> select capability_name, possible
        2    from mv_capabilities_table
        3   where capability_name like '%REFRESH%'
        4   order by capability_name;
      
      CAPABILITY_NAME                P
      ------------------------------ -
      REFRESH_COMPLETE               Y
      REFRESH_FAST                   Y
      REFRESH_FAST_AFTER_ANY_DML     Y
      REFRESH_FAST_AFTER_INSERT      Y
      REFRESH_FAST_AFTER_ONETAB_DML  Y
      REFRESH_FAST_PCT               N
      
      6 rows selected.
      
      SQL> insert into codes (id, product, code) values (1, 'Pants', 'Large');
      
      1 row created.
      
      SQL> insert into codes (id, product, code) values (2, 'Pants', 'Blue');
      
      1 row created.
      
      SQL> insert into codes (id, product, code) values (3, 'Pants', 'Itchy');
      
      1 row created.
      
      SQL> commit;
      
      Commit complete.
      
      SQL> select *
        2    from code_agg_mv;
      
      PRODUCT    CODES                                 CNT
      ---------- ------------------------------ ----------
      Pants      Blue,Itchy,Large                        3
      
      SQL> -- ^^^ This is correct ^^^
      
      SQL> delete from codes where id = 3;
      
      1 row deleted.
      
      SQL> commit;
      
      Commit complete.
      
      SQL> select * from code_agg_mv;
      
      PRODUCT    CODES                                 CNT
      ---------- ------------------------------ ----------
      Pants      Blue,Itchy,Large                        2
      
      SQL> -- ^^^ CNT is correct, but codes should not contain "Itchy" ^^^
      SQL> --
      SQL> -- Try an explicit fast refresh...
      
      SQL> begin
        2       dbms_mview.refresh('CODE_AGG_MV', 'F');
        3  end;
        4  /
      
      PL/SQL procedure successfully completed.
      
      SQL> select * from code_agg_mv;
      
      PRODUCT    CODES                                 CNT
      ---------- ------------------------------ ----------
      Pants      Blue,Itchy,Large                        2
      
      SQL> -- ^^^ Nope, same issue. ^^^
      SQL> --
      SQL> -- Try an explicit complete refresh...
      
      SQL> begin
        2       dbms_mview.refresh('CODE_AGG_MV', 'C');
        3  end;
        4  /
      
      PL/SQL procedure successfully completed.
      
      SQL> select * from code_agg_mv;
      
      PRODUCT    CODES                                 CNT
      ---------- ------------------------------ ----------
      Pants      Blue,Large                              2
      
      SQL> -- ^^^ There we go. ^^^
      
      

      Message edited by Tom N to include database version information.

      Hello Tom,

      listagg() is not supported for fast refresh.

      http://docs.Oracle.com/CD/E11882_01/server.112/e25554/basicmv.htm#i1007028

      Only SUM, COUNT, AVG, STDDEV, VARIANCE, MIN and MAX are supported to fast refresh.

      Kind regards

      Pravin

    • Overview DDL works does not as expected

      In the interest of this question, I have 2 paintings in my template and each has been designed from 2 separate schemas.  The paintings are: APEX_DEMO. CUSTOMER and APP_UTIL. ACTIVITY_LOG.  When I go to 'the DOF preview' in the menu context (right click) for each table, I get the following:

      CREATE THE TABLE APEX_DEMO. ACTIVITY_LOG

      (

      NUMBER OF ACTIVITY_LOG_ID

      ...

      CREATE THE TABLE APEX_DEMO. CUSTOMER

      (

      NUMBER OF CLIENT_ID,

      ...

      You will notice that the DOF for each table is the APEX_DEMO schema when the schema of the table, under (general) table properties told APP_UTIL.

      Why does this work?

      I mean it's somehow related to the setting of the preference: Data Modeler-> model-> physics-> default user as

      I can reproduce it now

      It cleared up as soon as I deleted the default user.

      This is the workaround.

      Thank you, I logged a bug.

      Philippe

    • Script works does not as expected

      Script should auto set annotations for me, it was taken directly from "VMWare vSphere PowerCLI référence" Chapter 5

      $VM = get - VM 'test '.

      $VM - get-VIEvent-entity Types information |

      Where-Object {$_.} GetType(). Name - match "VmBeingDeployedEvent". VmCreatedEvent | VmRegisteredEvent | VmClonedEvent"} |

      {ForEach-Object

      Set Annotation - entity $VM - CustomAttribute CreatedBy-value $Event.UserName

      Set Annotation - entity CustomAttribute - CreatedOn - $VM $Event.CreatedTime value

      }

      This is the error:

      Set Annotation: Impossible to validate the argument on the parameter 'value '. The argument is null or empt

      y. provide an argument that is not null or empty, and then try the command again.

      The Custom vars.ps1:8 char value: 15

      -Value + < < < < $Event.UserName

      + CategoryInfo: InvalidData: (:)) [game-Annotation], ParameterBindingValidation)

      Exception

      + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.

      Cmdlets.Commands.SetAnnotation

      Set Annotation: Impossible to validate the argument on the parameter 'value '. The argument is null or empt

      y. provide an argument that is not null or empty, and then try the command again.

      The Custom vars.ps1:11 char value: 15

      -Value + < < < < $Event.CreatedTime

      + CategoryInfo: InvalidData: (:)) [game-Annotation], ParameterBindingValidation)

      Exception

      + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.

      Cmdlets.Commands.SetAnnotation

      However a coupe version of the script:

      $VM = get - VM 'test '.

      $VM - get-VIEvent-entity Types information |

      Where-Object {$_.} GetType(). Name - match "VmBeingDeployedEvent". VmCreatedEvent | VmRegisteredEvent | VmClonedEvent"}

      Returns:

      Model: false

      Key: 1022221

      ChainId: 1022221

      Createduserid: 17/06/2011 10:52:15

      Username: EXAMPLE\Me

      Data Center: VMware.Vim.DatacenterEventArgument

      ComputeResource: VMware.Vim.ComputeResourceEventArgument

      Host: VMware.Vim.HostEventArgument

      VM: VMware.Vim.VmEventArgument

      Ds                   :

      Net                  :

      Dvs                  :

      FullFormattedMessage: Created the test of the virtual machine on vm6.example.com

      ChangeTag:

      DynamicType:

      DynamicProperty:

      I don't know if that makes a difference, but I am running 4.1u1 and 4.0 vSphere powerCLI

      Someone knows why?

      EDIT: running variable dir: dosent seem to show $Event as existing, $VM is here

      You need to replace $Event with $_ because you get the value of the line. Like this:

      $VM = Get-VM "test"
      Get-VIEvent -Entity $VM -Types Info |
        Where-Object { $_.Gettype().Name -match "VmBeingDeployedEvent|VmCreatedEvent|VmRegisteredEvent|VmClonedEvent"} |
        ForEach-Object {
          Set-Annotation -Entity $VM -CustomAttribute CreatedBy -Value $_.UserName
          Set-Annotation -Entity $VM -CustomAttribute CreatedOn -Value $_.CreatedTime
      }
      

      Best regards, Robert

    • BackgroundColor SpanElement works does not as expected

      I added a simple RichText element with a SpanElement as content. I put the backgrounColor of the span, but rather than highlighting of the text as a whole, it highlights only the pixels of a few albums of the first line of text.

      Is this a bug or I do something wrong?

      <? XML version = "1.0" encoding = "utf-8"? >

      < mx:Canvas ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

      " = xmlns:mx 'library://ns.adobe.com/flex/halo"" "

      " width ="100%"height ="150"

      " horizontalScrollPolicy ="off"verticalScrollPolicy ="off"

      " xmlns:s = 'library://ns.adobe.com/flex/spark""">

      < fx:Script >

      <! [CDATA]

      [Bindable]

      public var imageUrl:String;

      [Bindable]

      public var caption: String;

      ]]>

      < / fx:Script >

      {"" < mx:Image source = "imageUrl{}" width ="210" height = "150"x ="{}(width - 210) / 2}" / > "

      < s:Group >

      " < s:RichText width ="135"height ="100%">

      < s: content >

      {"" " < s:span fontSize ="16"fontFamily ="times, serif"color ="#000000"backgroundColor ="#ff0000"text =" caption {}}"/ > "

      < / s: content >

      < / s:RichText >

      < / s:Group >

      < / mx:Canvas >

      OK - I can reproduce the problem with this version of the Flex SDK. The good news is that I can't reproduce in the generation of today (4.0.0.10096). It seems that someone else noticed the problem and fixed at some point.

    • I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I'm bitterly briv

      I had endless problems with Lightroom since the purchase of subscription for one year in December 2014. Now, the development Module was disabled, as they claim that my subscription has expired...  He spent more time to work does not, and I bitterly regret it.  Help, please!

      Open the Adobe Creative Cloud application then go to preferences then sign out and then sign back with the same Adobe ID that you used to purchase the subscription photographers, that is to say the same e-mail address and password.

      Then open Lightroom and go to the Help menu and make sure that it is signed in with that Adobe ID email address.

    • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

      With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

      I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

      Thanks for the help!

    Maybe you are looking for