Posting videos on the extended desktop.

Similar Questions

• Connect two Macbook Pro retina to create the extended desktop

  I have two Macbook Pros retina 15 inches (personal: mid 2012, work: mid 2015). They are both under OS x El Capitan 10.11.3

  I would like to connect them to create a wide area network.

  Am I wrong? Is there a way to share the two opens with a bolt of lightning?

  I don't understand what you're trying to do. In your message your refer to:

  1. create the extended desktop

  2. create a WAN

  3. share the poster

  That is what you try to do?

• Qosmio G30: How to turn on the extended desktop?

  It is possible to extend the desktop on the screen of the laptop and and external monitor when connected to an external monitor? I see in the manual that he talks with the "simultaneous" external display and the monitor to the laptop, but I need her to be not only "reproduced" and "extended" on both monitors for both monitors.

  In addition, these two monitors can operate with different resolutions (for example, 1280 x 1024 on the resolution of the laptop standard and external)?

  It is also possible to drive two external monitors of the single monitor out (I do not, but thought I would ask)?

  Thank you

  Phil

  Hello

  Of course, it should be possible to activate the extended desktop.
  Go to the display properties. Then, choose the number of Monitor 2 and choose the option to extend my desktop on this monitor
  It is also possible to use different resolutions.

• M300: Don't forget the extended desktop settings

  I use my M300 with a monitor and an extended desktop (i.e. different images on both monitors). I also have the external monitor put in place for a higher resolution than the lcd (and on the left of the LCD not allowed).

  However, I have to redo the settings everytime I connect. Is there a way to get the graphical utility to remember the configuration (and even to assign to the left button of the keyboard hardware)?

  Hello

  As much as I know the laptop don't forget last configuration, and if you use the extend my Windows desktop on this monitor, it may happen that the application window will not be displayed on LCD laptop but on extended monitor you will not be able to see in this case.

  I spend every time as you and it takes just 30 seconds and I can live with it. Just a question: how to connect external monitors (directly to the laptop or docking station)?

• Do not allow the "extended desktop".

  I just hooked a 55 '' Vizio TV for my portable MacBook running Windows 7 and VMWare Fusion.

  For some reason when I try to extend the desktop so I can drag the laptop to windows

  He won't let the TV screen.  When I click "Apply settings", it reverts back to 'Show '.

  Office only on 1. "Also, when I click on"Identify"it indicates a '1' on both screens.  Mac OS

  allows me to expand Desktop but on side Windows does not work.  Any ideas?  Frustrating to say

  the least.  Thank you.

  Hello

  I understand the inconvenience caused to you. I will certainly help you in this matter.

  This problem can occur because of incorrect settings of multiple display.

  I suggest you to visit the following links to check the correct settings:

  Move windows between multiple monitors

  Work and play better with multiple monitors

  You can also update the graphics driver. To determine if there is a newer driver for your graphics card, visit your computer or graphics card manufacturer's Web site and download and install the latest Windows 7 compatible drivers.
   
  See the following article from Microsoft for more information on the update of drivers:

  Update drivers: recommended links

  If the problem still persists, I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  TechNet is watched by other computing professionals who would be more likely to help you.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Thank you.

• Satellite P200 Vista Ultimate - Extended desktop does not remain on the left

  I can EXTEND my desktop to a second LCD on my Satellite P200 without problems - UNTIL I place it on the LEFT.

  It will not retain this position (I need to reposition after every restart - this I can live with that).

  But I use a KMV switch intensively, whenever I come back to the Satellite, the extended desktop is back on the right.

  Someone at - it ideas?

  Post edited by: HammondKF

  Hello

  I think it s a display driver problem.
  Try to update the graphics driver to the latest version.
  If you will be late nothing on the European driver Toshiba page try to search on the site of Toshiba Canada and 3 websites of third parties such as www.omegadrivers.net or www.laptopvideo2go.com

  If you will not find the latest drivers try this temporary fix.
  Don t let the Windows Vista TMM to manage your multiple monitors.
  Go to Task Scheduler, in the list of active tasks, find the line task TMM, turn it off - off on logon trigger (or delete - save/export task before you do), and then restart your windows. I hope it will work ;)

• How to set primary monitor in extended desktop

  Recently upgraded to Windows 7. I have a thinkpad t60 with mini port replicator. I am trying to use the extended desktop. I have an external monitor to my left and thinkpad on my right. I can't just to get extended working with my pad desktop think as primary monitor, so I have to keep moving all my icons to the external display to the left (and in front of me). How can I keep the prospect even monitors but just do my external monitor my primary monitor? Note I tried dragging the monitors in the window "Change the appearance of screens", but my cursor then moves in front of the prospect.

  Hello
   
  Here's how you can do this:
  a. right-click on an empty space on the desktop and click on the screen resolution.
  b. at the top, you will see the current main screen with the Start Menu in the lower left.
  NOTE: If you are unsure which monitor who is, then click on the button to display the number on the screen to match with identity.
  c. at the top, click on the numbered display device (ex: monitor, projector or TV HDMI) you want to make your primary display to have its established border highlight.
  d. check the brand that my hand display and click OK to apply.
  NOTE: You will notice that when you check this box, the Menu start now we in this numbered display.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Extended desktop preferences reset on logout, restart or sleep.

  I have my laptop is docked to a ViewSonic monitor to the right of the laptop. I prefer to use the Extended Desktop setting. The laptop screen is my main screen and the ViewSonic monitor is my secondary display.

  I've had this laptop for only a few weeks. Whenever he goes to sleep, undocked, or restarted, it 'forgets' the display settings and returns to a default setting of cloned with the monitor (not portable) desktop computers set as primary. Curiously, before it reverts to the default settings, it briefly displays the Office extended with my favorite settings. So, I have to manually reconfigure the display properties. A real pain to do several times a day.

  I don't have this problem with this monitor with my previous laptop (running XP Pro). Is it a Windows 7 problem? It seems that Vista had a problem like this, my review of the other forums.

  Any comments would be much appreciated.

  Thank you
  ----------------
  Fujitsu LifeBook T4410 Notebook/Tablet PC
  Windows 7 Professional

  Monitor:
  ViewSonic VG930m-3
  Pilot: 6.1.7600.16385 (21/06/2006)

  Graphics card:
  Mobile Intel 4 Series Express Chipset Family
  Mobile Intel GMA4500MHD
  Intel Graphics Media Accelerator Driver for mobile

  Hi PlanoJohn42,

  I suggest you try the steps listed in the link below: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/a30a3bfd-c163-40f8-98ac-c85b7441797b check if the problem is resolved.

  You can even try the steps below:

  Search the hardware changes. Follow the steps below for the same thing:

  i. click Startand then click run.

  II. type devmgmt.msc, and then click OK. Open the Device Manager window.

  III. in Device Manager, click on your computer so that it appears highlighted.

  IV. click Action, and then click find the hardware changes.

  v. restart the computer and check if the problem still persists.

  Here is a link, please refer to: multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems (for Windows 7)

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't view the video of the Moon I posted on facebook works on youtube video I made

  I can't watch the video of the Moon I posted on Facebook works on you tube the video I did, I could answer Tuesday, I will be not available

  It's fixed now, thank you, the problem was, it was work on ie but not mozilla, but it is fine now

• I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now

  . Video streaming

  I can stream movies on my PC using the desktop PC monitor. But when I unplug the monitor and use a PC to TV HDMI cable I get the video but the audio now... Suggestions?

  Thanks for the file INF. I ck'ed for driver updates and I have the latest drivers installed.  I got the sound working on the TV by hanging the audio output of the PC to the entrance of the TV with the HDMI cable in place for video. It's the simplest solution to this problem, so I took it.

  By the way, I have a Dell 620 with windows 7.

• Software Distribution Service 3.0. my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  XP Professional 5.1.2600 Pack 3. Automatic updates are on. After that an automatic update on Mei and June 2012 identified as Software Distribution Service 3.0 my wallpaper, all my documents, my videos, my photos, my desktop shortcuts, etc. all gone. has had to do a system restore. How can I avoid this in the future?

  Software distribution service 3.0 is a system restore point, not an update.

  When an update is installed a SDS is created.

  To check the name of the update, go to the Microsoft Update Web site and check your update history, search for the date, that the error occurred.

  Also make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  I guess 'Mei' is your abbreviation of Microsoft Security Essentials under your antivirus protection, is this correct?

  After return with answers to the questions and the results of the analyses.

• Extend the Windows desktop in the DISPLAY AREA?

  Cannot find or do not? Why? try using a different monitor and can not find how to switch the default monitor to a secondary monitor! Help!

  Hello

  You need to configure Windows display adapter to extend your desktop:

  Right click on the desktop and then click Properties.
  In the DisplayProperties dialog box, click the settings tab.
  Click the display list and select your external monitor. If you don't see more monitors listed, your hardware may not support Dualview. You can still use MaxiVista to set up a second computer as an additional screen, however.
  Select the extend my Windows desktop on this monitor option. Click on apply or OK.

  You can also make reference to: http://www.microsoft.com/windowsxp/using/setup/learnmore/northrup_multimon.mspx for more information.

• Difficulty playing the video in the Desktop Application

  Hello

  I'm playing two H.264 encoded (.mov) videos in a desktop AS3 application. I tried publication Air and projector, but both have (different) problems with playback. When you test the SWF in Flash, both work very well.

  I use a simple NetStream function to play videos from a local directory. As I have said, that they both will work perfectly in Flash, so I feel like I'm missing something obvious, but have struggled to find documentation on the streaming locally.

  The application of Air works better, but can't seem to play the second video. (I have also had terrible evil to do around from safety of Air that I use LocalConnection in another part of the application, so prefer not to use it).

  The projector starts to play the two videos but soon began to stammer and choke and eventually freezes the entire application.

  The Adobe documentation states that it is possible to use NetStream locally, but maybe that's not the case?

  Anyone have any ideas?

  Thank you

  Maryann

  I think you started the right way - there is no reason to suspect that this problem would exist initially. I don't have a direct solution for you, but I find that it is useful for creating small samples of what is the problem and suggest trying the following...

  Create a simple SWF file that only charge & play video. Do nothing else in this file (in the unlikely event that something else is affected video playback) and then display them in the projector and the way air.

  Also, just try to use the video component included in another simple example and see projector/air, just to see if you encounter the same problems of reading. If you do, I had initially suspec something on your computer system compared to Flash.

  I have not ran across, or noted problems such as this, in which controlling loading/video using the NetConnection and Netsrream classes... I've done a few projects with H.264 videos, but they weren't in the format MP4, MOV (I guess that there should be no difference in reading, however).

  One last thought - what is the data rate you have compressed your videos? If it is really high (2 megabits per second), maybe it is too much tax on your system (and is too high for the general display broadband, anyway).

• window appears on the extended screen, but the screen isn't there anymore so can't get to the window (2nd screen on laptop is only when it is connected to the desktop)

  Hi... interesting problem. I use my laptop computer on a desk with a second screen and moving.

  The last time I was using my laptop on the desk, I brought an application (Quicken) on the second screen and now when I start it up it displays on-screen extended even if I use the standalone laptop. I can't demand because it appears in the second screen and I can't get it back to the main screen. I even rebooted and it seems to 'remember' where is was the last time.

  Any thoughts on how to get it back (I know I can reconnect the second screen and move it back, but what about the time when I'm not near my office and want to access an application that was last used on the extended screen.)

  Argh...

  Thanks for your thoughts, I assume that there is a simple key sequence to make it visible on the main screen once I can't find it anywhere.

  Kind regards
  Lex Gitter

  Very late reply, I have the same problem and I solve it hovering over the window you want in the taskbar when the preview window displays a right-click on it.  Select optimize.  The window will appear on your screen.  No, you can enter the window and its size down, it stays on the current view

• Problem with "Extended desktop", integrated display is disabled

  Hi all

  I have a MacBook Pro 13 inch early 2011 with OSX El Capitan 10.11.4.

  Just before I upgraded to 10.11.4, I use to work with "extended desktop" using the built-in screen and the external monitor. Since the update, whenever I connect the external display it goes automatically to the external screen and completely disables the built-in screen. Sometimes removing the HDMI cable (with mini port adapter), putting the MacBook to sleep, log in again and the Mac, the awakening back on two screens, but most of the time he spends just go back to the external display only. This gets really annoying.

  When you use the external monitor display poster preferences only options of this monitor and my arrangement tab is missing (like the built-in display is temporarily disabled). By clicking on "Detect displays" (after pressing option to show) doesn't change anything. Using the brightness to toggle keys mirroring does not work either.

  Is - it there anyway that I can configure so worth by default "Extended desktop" with built-in monitor on and external display?

  Any help will be appreciated.

  Thank you

  Hi there Ajgalvezm,

  It seems that your computer does not work with your monitor external because you upgrade 10.11.4. I would use these steps in the following article to help you solve problems that:

  Get help with graphical problems on external displays connected to your Mac.

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Thank you for using communities of Apple Support.