Pouvez HP HDX 18 t, 1200 laptop computer series Sata 3 premium support?

Hello, newbie here.  I have several HDX-18 t, all of which are premium series 1200.  Summer looking to install Hdd Seagate memorable XT 500 GB (hybrid hard disks) requiring SATA2 support.  In my view, supports existing chipsets SATA2.  However, I am also looking to XT memorable 750Go (hybrid); However, this technique requires support SATA3.  Anyone has any experience with the upgrade of their t HDX-18 to one of these two discs.  Everything and al information would be appreciated.  THX

bigtuna02 wrote:

Hello, newbie here.  I have several HDX-18 t, all of which are premium series 1200.  Summer looking to install Hdd Seagate memorable XT 500 GB (hybrid hard disks) requiring SATA2 support.  In my view, supports existing chipsets SATA2.  However, I am also looking to XT memorable 750Go (hybrid); However, this technique requires support SATA3.  Anyone has any experience with the upgrade of their t HDX-18 to one of these two discs.  Everything and al information would be appreciated.  THX

Hello

Your laptop supports the connection of SATA 3.0 (SATA II) so the hybrid 500 GB should be fine. You can also use the other, but it will only work at speed SATA II (3Gbps) (such as a hard disk SATA II)...

Tags: Notebooks

Similar Questions

  • Laptop computer PC SATA support 3 HP 1000-1140TU

    Hello

    I plan to buy a new SSD for laptop PC HP 1000-1140TU. But I don't know if it supports SATA 3 (6 Gb/s) standard or does not work. I'd appreciate any help about the case.

    You are the very welcome.

    All I can ask is why HP would cripple this laptop model by connecting not not the sata port 3 on the hard drive?

    That would make sense.

    Why would you even consider buying a SATA II SSD when they are probably hard to find and difficult to cost much less than a sata III SSD today?

    Chapter 1, pages 1 & 2 of the manual on the link below lists the Intel processors that are supported for your model.

    That would be all the info I can provide on the processor socket.

    http://h10032.www1.HP.com/CTG/manual/c03298365.PDF

    On most HP laptops that I've seen, they use different motherboards for processor Intel dual core and quad core processors, so if I were to take a guess, I would say that the i7-2670QM will not work.

  • Why 2 partitions of OS on HP dv9628 laptop computer under Vista Home Premium?

    I was just checking my wife of the older HP Pavilion dv9628nr under Vista Home Premium with 2 HARD drives.  I didn't even know he had 2 HARD drives.  I opened the case to make sure.

    Here is a screenshot of disk for system management.  I have a few questions:

    1. Why is there a system operating on each HARD drive partition?

    2 are 2 necessary and deleted maybe?

    Generally however, the C: drive is not always your primary. This may change if based on the installation program. The installer in this book, could be Raid. This is where the 2 drives are used to create a combined drive. Based on the laptop being adverstised as a drive of 240 GB, but with 2 120 GB drives in it. This is most likely how it was setup. To know for sure you'd have to check to see if this feature is enabled in the BIOS.  Before you change any settings that you would like to make sure that you have recovery discs and backed up all the content. As having the OS on a single disk, you will need to disable Raid in bios and probably to format both drives. Then reinstall the operating system on you get (the one listed as C:, to avoid complications).

    This article (from ehow.com) can help with your Bios check, so that you can see if Raid is enabled and if you choose to disable. How to disable Raid BIOS

    I hope you're able to help.

  • HDX 16 t 1200: upgrade Windows 10: Base system device

    Hello

    First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

    I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

    >? Another device

    - ?! System device base (calling it a 1)

    - ?! (2) base system device

    - ?! Device base system (3)

    - ?! Unknown device (4)

    Properties:

    1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

    Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

    2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

    Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

    3 bus PCI 6, device 0, function 3

    Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

    4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

    Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

    Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

    I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

    Thanks in advance for any help.

    Hello:

    You need these drivers...

    Base system devices:

    This package contains the driver for laptop models JMicron card reader supported and operating systems.

    File name: sp42446.exe

    Unknown device:

    This package provides the HP 3D DriveGuard for laptops software
    models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

    FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

  • BSOD BAD_POOL_CALLER error with my acer E1 - 572G laptop computer running Windows 8

    Hello

    Nice day

    I also have a problem with my acer E1 - 572G laptop computer running Windows 8.

    Only during the restart of my laptop, it's always show the BAD_POOL_CALLER error code

    and a blue screen.

    She does whenever I want to restart. Stop and then put on now displays errors.

    I encountered this error several times.

    I downloaded the minidump files.

    The link to the files is:

    https://www.mediafire.com/folder/3nn883rs78p4qqe,bfcx73m2a3dodp6,edk1ebfdmezdakt,ce7mbir7enbznjr,qzdxpddiurioywy,mctv8lmlptdr86t,aae9dt4xxhwkq36,4ncglnqhedwuwnp,vjaejk18xob2b2w,03cjeaaanxyfs6a,ltrnk3oh4jq3e00,v2l8kyaawhnyluq,ttt1t5obw5gcayc,8oobh626v64sp0h,wmkwawbugww12et,qgrrwp1xrp3w2yk/shared

    Kindly let me know if all minidump files all belong to the same problem.

    Please please help me.

    Kind regards

    Ashaikhd

    Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/badpoolcaller-BSOD/202df5d4-b74c-4489-b773-ac40e286aec7

    These were related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation in conflict with your two applications of malicious software.  I remove both (the Defender built in use) and install the latest broadcom driver available, even if it is the same date that drivers become corrupt

    Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
    Copyright (c) Microsoft Corporation. All rights reserved.

    Loading dump file [C:\Users\Ken\Desktop\070514-45203-01.dmp]
    The mini kernel dump file: only registers and the trace of the stack are available

    Symbol of validation of the path summary *.
    Location of response time (ms)
    C:\Users\Ken\Desktop OK

    Symbol of validation of the path summary *.
    Location of response time (ms)
    Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
    Executable search path is: C:\Users\Ken\Desktop
    Windows 8 Kernel Version 9600 MP (4 procs) free x 64
    Product: WinNt, suite: TerminalServer personal TerminalServer
    By: 9600.17085.amd64fre.winblue_gdr.140330 - 1035
    Computer name:
    Kernel base = 0xfffff800 'f1e05000 PsLoadedModuleList = 0xfffff800' f20cf2d0
    The debugging session: Fri Jul 4 20:21:13.557 2014 (UTC - 04:00)
    System Uptime: 0 days 0:00:20.332
    Loading the kernel symbols
    ...............................................................
    ................................................................
    ..........
    Loading user symbols
    Loading unloaded module list
    ......
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    Use! analyze - v to obtain detailed debugging information.

    BugCheck C2, {7, 1200, 247c894c, fffff801d2f6a733}

    WARNING: Unable to verify timestamp for bScsiSDa.sys
    ERROR: Module load completed but symbols can be loaded for bScsiSDa.sys
    Probably caused by: bScsiSDa.sys (bScsiSDa + e656)

    Follow-up: MachineOwner
    ---------

    0: kd >! analyze - v
    *******************************************************************************
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *
    *******************************************************************************

    BAD_POOL_CALLER (c2)
    The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
    Arguments:
    Arg1: 0000000000000007, attempt to free pool which was already freed
    Arg2: 0000000000001200, (reserved)
    Arg3: blocking content from the memory of the 00000000247c894c pool.
    Arg4: fffff801d2f6a733, address of the block of pool is released

    Debugging information:
    ------------------

    BUGCHECK_STR: 0xc2_7

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

    Nom_processus: System

    CURRENT_IRQL: 0

    ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

    LAST_CONTROL_TRANSFER: from fffff800f209b42a to fffff800f1f58fa0

    STACK_TEXT:
    ffffd000 '784b26a8 fffff800' f209b42a: 00000000'000000 c 2 00000000'00000007 00000000'00001200 00000000' 247c894c: nt! KeBugCheckEx
    ffffd000 '784b26b0 fffff800' f2253ee8: fffff800 'f20a8300 00000000' 00000082 ffffd000 '784b27a8 fffff800' f1e35711: nt! ExFreePoolWithTag + 0x114a
    ffffd000 '784b 2780 fffff801' d2f6a656: 00000030' ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 00000000 b 784, 2910: nt! RtlFreeUnicodeString + 0x18
    ffffd000 '784b27b0 00000000' 00000030: ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 784b 2910 00000000 00000000': bScsiSDa + 0xe656
    ' ffffd000 '784b27b8 ffffe001' d7fcfaa0: 00000000 ' ffffd000 00000000 ' 784b 2910 00000000 00000000' 00000000': 0 x 30 fffff800
    ffffd000'784b27c0 00000000' 00000000: ffffd000' 784b 2910 00000000 00000000' fffff800'00000000 00000000 00000000': 0xffffe001'd7fcfaa0

    STACK_COMMAND: kb

    FOLLOWUP_IP:
    bScsiSDa + e656
    fffff801'd2f6a656 488b8df0000000 mov rcx, qword ptr [rbp + 0F0h]

    SYMBOL_STACK_INDEX: 3

    SYMBOL_NAME: bScsiSDa + e656

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: bScsiSDa

    Nom_image: bScsiSDa.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 51e9aefb

    FAILURE_BUCKET_ID: 0xc2_7_bScsiSDa + e656

    BUCKET_ID: 0xc2_7_bScsiSDa + e656

    ANALYSIS_SOURCE: KM

    FAILURE_ID_HASH_STRING: km:0xc2_7_bscsisda + e656

    FAILURE_ID_HASH: {cff94011-1a4c-5d32-9ebb-2de22db811dd}

    Follow-up: MachineOwner
    ---------

  • After syncing firefox from one laptop computer to the other, I repeatedly get syncted phone has the same IP address as the original. Reverse?

    One of the results of these two laptops with the same IP address was that the original laptop computer proxy settings have been changed and I could not get into the internet. After you restore the default proxy settings, I again had access to the internet, but two laptops always have the same IP address.

    You do not use DHCP to automatically assign different IP addresses?

  • I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

    I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

    If your iOS device does not appear in iTunes, try the following:

    1. Open Control Panel > Device Manager
    2. Plug in your device
    3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
      It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
    4. Right-click and select software update of the driver...
    5. Click Browse my computer for driver software
    6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
      C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
    7. Click on let me pick from a list of drivers for devices on my computer
    8. Click on Apple Mobile Device USB Driver
    9. Click Next, then close and exit the Device Manager

    To step 3 above, open the Device Manager. Expand one of the articles that are listed.

    • USB Bus controllers
    • Imaging devices
    • Portable devices
    • Other devices

    Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

    Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

    If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

    Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

    TT2

  • I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

    As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

    At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

  • Laptop computer charger plugged in but not charging

    Hello

    I bought a computer laptop hp pavilion dv6-6154tx laptop computer last month.my, developed a particular problem. When I connect my charger to it, it starts to load, but after a while it stops and the battery icon shows "plugged in, not charging". Then after awhile it again starts.

    Sudroid.co.cc

    There is a BIOS update available that is specifically for the intermittent support question. I recommend you to install.

  • Direct print from laptop computer connection

    I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

    You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

    If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

    That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

    On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

    If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

  • HP15-g088ca: HP 15 laptop computer purchased less than 2 years ago. Broken hinge, display cases of separation. HP, please help.

    My son uses his laptop computer HP15 home to his office, rarely transporting.  He never gave it and a sweet user.

    The left hinge seems to be broken / defective, and separates the window.  For now, we are all leaving the screen open all the time, but it's a little awkward and the problem is certainly on a laptop less than 2 years old.

    Looking at the forum, it looks like a common problem.

    We are fans of HP in general, so I hope that this problem can be solved.

    Help, please.

    -Steve

    Hooray!

    HP solved the problem free of charge, including shipping in both directions and repair.

    It took ten days in total, and we used the laptop without a problem for about 10 days more.

    It seems that the hinges for laptop and the display case were entirely replaced, and no data has been lost.

    My son is thrilled to have his laptop in return, and to my eyes, HP just went through.

    I wouldn't hesitate to buy another HP product, although I confess in the hope that:

    (1) HP manufacuring no longer uses defective parts

    (2) HP treats everyone with this problem of hinge with the same care

    Thank you and HP support HP!

    -Steve

  • Satellite A210 - 1 4 - failed to start the laptop computer just orange light

    OK, so this is what happened:

    While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

    I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

    I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

    ANY IDEAS?

    Hello!

    I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
    You can start without WiFi card?

    To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

    Good bye

  • cannot print on IPad but will be printed on IPhone and laptop computer HP

    Use a HP LazerJet 200 colorMFP M276nw == have wifi wireless system
    cannot print on IPad but will be printed on IPhone and laptop computer HP
    How can I get the Ipad for printing follow-up after it shows the document sent to the printer?

    Hi ddavid1,

    Welcome to the Forums of HP's Support. I believe that when you send a print job from your iPad to your color Laserjet 200 printer MFP M276nw, it does print ever.

    I have included the Apple Mobile Devices (AirPrint): Document Print or is stuck in the print queue document. I know that you are able to print from your iPhone, but please start with a Solution in the document. I have also included the document to print from an Apple device . In the section 'With Apple's AirPrint printing', he has advice on using AirPrint and what it takes.

  • By clicking laptop computer and cutting

    Hello

    I bought my laptop, a series of flag the next day, about a month a go I notice that my computer would randomly off, usually while playing LoL, it happened about 3 times now, my computer on the lower left side has also a distinct rattle and I hear it's my hard drive, or something, please help

    Thank you

    PS I also think that I don't have a warranty more

    Hi Dennyy,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion Notebook and a clatter of fan or possibly the hard drive. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If this does not help, try to perform a test equipment.

    I suggest to contact HP support and let them know that you found a clicking sound hard drive. The computer should still be under warranty. Here is a link to HP support contact options. You cancheck the status of the warranty here.

    Hope it will be useful.

    Thank you.

  • Portable spectrum: will be my new laptop computer spectrum bought the work we camera in Australia

    Hello.

    I just bought a new laptop of spectrum in the United States.

    I need travel in Australia for work. This portable US will be OK when plugged into power in Australia which has a different voltage (assuming I use a plug converter suitable).

    Also, do you know if it is possible to use a HP spectrum Australian power adapter so that I don't have to carry around one of these power converters ugly on the end of the plug US?

    Thanks in advance.

    Hello

    First of all I live in a city called Melbourne (Aystralia) right now and my laptop computer loan spectrum is the United States (office of HP in Utah) and Yes, all I need is a tourist adapter as shown above.

    Second performance I see no difference, please note: we use 240V in Australia and the charger will be doing the work to convert AC current DC to run the laptop.

    I would like to mention here: I've traveled around not less than 20 countries with some laptops (from time to time, not at once) and once again all I need is a universal travel adapter.

    Kind regards.

Maybe you are looking for

  • How to remove context except flyouts menu icons

    I would like to hide the icons of all the context menus, except icons search engine in two flyouts created by extensions Image Search Options and research context. I found the css to hide all the icons, but who hides the icons search engine in these

  • Importers new bookmarks from Safari will create replicas

    I already imported most of my favorites, but it's been a while since then, and I would add those that I've gained since. However, I am concerned, he will simply double those I already, as well as the most recent addition. FF will know not not to add

  • PLAYSTATION 3 and WINDOWS MEDIA PLAYER

    I want to install windows media player on my playstation 3 to be able to watch documentaries online since I don't have the cable to connect my pc to my tv. If this is not possible, I was wondering if there is a way to connect the wireless computer to

  • Bad source HP Envy 15-j126TX

    I bought this laptop in February this year, and immediately I was disappointed by the generation of the laptop. The keyboard and the screen too easily bending position would become depressed (IE flexible) even when type without a lot of strength, whi

  • Volume bar that appears on the screen when the volume control has disappeared.

    I recently had to create a new profile on my computer because my old profile somehow corrupting.  In my old profile, I got a small box of volume that would leap whenever I set the volume with the buttons on my keyboard and would let me know how high