power button causing light pop

Similar Questions

• HP 2009 m, black screen, power button / stop lights

  I have a HP 2009 Mr. Windows Vista 64-bit. 4 years.

  I can turn my computer on fine, check e-mail, watch videos, etc. but then the screen will be black. The blue button lights. If I turn off and on. It will work for like 5-10 min or more, then it will be a black screen.  If I watch a video when it goes to a black screen, I can still hear play.  I hear a slight hum coming from the screen that I never heard before that happened.  Is it my desktop computer or do I need a new monitor?

  Hi NSCY,

  The fastest way to isolate the problem to the screen would be, if possible, be: try the monitor on another PC or another monitor to the computer.

  Check your graphics card and the power of the connections on the PC and the monitor also.

  Your graphics card may also cause this problem.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.
  
  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.
  
  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.
  
  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Pro 3 yoga and Hibernation power button

  Hello

  I have a problem with turn on the laptop after that it goes the way standby mode Hibernate (no doubt).

  Since the beginning, I installed Win clean 10 with the latest drivers of Yoga.

  Now when I put the Yoga sleep (power button flashes) and after an hour or so later Yoga switch to hibernation (power button stops flashing) I cannot wake it up by pressing the power button. Instead, it shows the Lenovo logo and turns off by itself. After that it works in a normal way - by pressing the power button / stop lights but don't relax after previous hibernation.

  Can someone help me with this problem? It is quite annoyng. This means that I always have to save all my work before Yoga put to sleep.

  Thanks for any help.

  Finally, I managed to solve the problem with the power button. I had disabled setting Fast Boot under windows, and everything works as it should.

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button

  Firefox v15 and up to cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15 to 30 seconds and I have to turn it off with the power button. It this causes only after I opened Firefox, my computer works well before the opening of Firefox. I h

  It looks a little like yo maybe has a hardware problem on your computer. have you tried to repair permissions on your hard drive? create a new Firefox profile? Use the Profile Manager to create and delete profiles Firefox

• TouchSmart 610: TouchSmart 610 lights. I have a set of 5 beeps with a yellow light above the power button.

  I keep my office earlier this morning with the entry of the normal shutdown process. When I went to reactivate tonight all I get is a set of 5 beep with a yellow light flashing above the power switch. Repeat this five times then beeps stop and only yellow continuous flashing. I can hear and feel the hard drive running. I tried to unplug the power supply and then plugging, but the same thing happens. If I push and hold the power button on, it sounds like the hard drive stops and restarts. The normal blue light comes on for a few seconds then turns off and is replaced by the yellow flashing light. All you have no idea as to what may be the issue?

  Hello:

  Normally 5 beeps means there is a problem with the memory.

  I suggest that you remove and reinstall the memory modules and blow up if this doesn't fix the problem, if your PC has two memory modules, an and see if the beep disappears.

  If this is the case, remove this module and specify the first condition in you removed and if the beep begins once again find the defective memory chip.

  If it is not, remove the module and put the other in you deleted and if the ringing stops, you have found the faulty memory chip.

  Then replace the faulty memory module by one with the same specifications.

  If the ringing continues despite trying these steps, and then either the two chips of memory are bad (unlikely), or the motherboard has a problem.

• HP ENVY 15 Notebook PC J0B65EA: Power button light Doesnt Go Out

  My original OS was Windows 8 and I upgraded to Windows 10.

  When I used my laptop too long and stop it, the power light does not turn off. I always have to press the power button to shut down completely. Any suggetions? Thank you

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Satellite A660 how can I turn off the light on the power button?

  Hello, I recently bought a new Toshiba A660-1FL.

  However mind, lighting of the multimedia keys, if I work in the dark.
  In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.
  This laptop has two power LED, so the lighting power is in my view, unnecessary.

  My question is: How can I turn off the light on the power button?

  Hello

  The power button led cannot be disabled.
  It s there if the laptop is turned on.
  The lighting in the BIOS option only controls the multimedia keys...

  Welcome them

• Satellite A60 power button / light stop in 2 colors. blue & orange

  Hi can someone tell me why power button lights in 2 different colors Blue and orange every thing seemed to be sure best ok
  Thanks in advance

  This will happen if your laptop is in stand by mode.

• Satellite P50-B-103 - light around the power button / stop does not work

  I bought this laptop a few days ago, and early on, I noticed that the light around my power button does not work.

  so now I'm in dillema it back or not?

  Everything works well, but because of the price, I expected to work correctly.

  And what is perhaps the reason for this?

  TNX

  As far as I know that the power button or to be more precise, the margin around the power button should be lit / lighted.

  In my opinion its not serious problem but if there s a problem for you and you are not satisfied with that, I recommend you contact the dealer to replace the unit.

  Greetings

• Acer Switch 10 i. put powered w / power cord, power button + volume Up/Down ii. No LED light

  Problem:

  Power does not illuminate. 75% battery charge. A tried
  a. power switch button
  b. power button + volume Up/Down button for 60 seconds (technique of being able to be in hibernation mode)
  c. a/c power cord... light to show load or power not turn on AND the Tablet does not become hot... in other words, Tablet accepts no power coming from being plugged into an electric outlet

  Solutions to be able to put it back on

  1. perhaps central card mother battery died... Well, in the past my LAPTOP would work with single power supply and no battery... but... it is a tablet that works maybe like a mobile phone because if the battery is dead, then unit does not work until the Central battery has sufficient charge

  2. maybe an electrical circuit problem?

  3. may reset a deep sleep mode?   ... but already there is a technique of this situation and I tried it.

  4 perhaps, software power settings but if are unable to start. can't get to the BIOS.

  Thanks much for any help.

  Solution... it was an electrical problem, capacitor w / low-Volt charge had gone below this threshold to function, voltage decay over time.  Replaced.  Laptop as it has done before does not.

• Stop shuts the laptop Windows 8 - FAN, power button light & Toucpad Light we

  I have HP Pavillion DV6 6140Tx

  Install Windows 8 Enterprise Edition and update drivers using the drivers for Windows 7 64 x on HP site

  The problem is that when I stop my laptop, isn't it shutsdown, it turns off the screen, but not the movement of processor, fan, touchpad, the light and the fan is on and it never stops.

  Then I force press n hold the Power button to stop it!

  There's also a problem of delayed start!

  But the function of reboot everything works fine... !

  I have not graphics drivers installed on the system - its AMD ATI RADEON HD 6700 M - no useful driver available!

  http://support.HP.com/us-en/document/c02948560

  Download the BIOS update given and the mentioned graphics drivers

  and it worked after restart!

  Card detected graphics and portable shutsdown even without problem

• I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  I've had my palm tx for 3 years now and I have had some problems with it. (because I bought it on the web, there was the guarantee) the first problem is the "power" does not work anymore? and the second, the scan goes blank (white) when I press one funds 4 (calendar or at home...). What could be the case of this defect?

  I bought my palm tx 3 years ago... problem: the power button work anymore; appear it only in a white light scanning when I press on the back 'home '.

  The warranty on a TX is only 1 year from the date of purchase.  Yours is way past the period covered.

  The switch was a small part of the TX.  Pressing any other button will turn on the unit, and it will turn off let it expire.

  There is a wire on the switch repair yourself, if you're a DO-IT-YOURSELF person here type:

  http://Forum.Brighthand.com/showthread.php?t=255871

  Have you tried a Soft Reset?  A warm reboot?  A Hard Reset?    Resets are explained here:

  http://KB.Palm.com and enter 887 'ID of Solution '.

  WyreNut

  Message relates to: Centro (AT & T)