Power cord IPS L: Hp monitor 23 inch HP Pavilion 23xw does not take to the office?

Good so I recently bought a new desktop computer HP and monitor, but does not have the cord that connects the monitor to the computer (I think that's what we call a vga?) or I guess that is not compatible.

The office, I ordered is a P5Q80AV of HP ENVY 750 #ABA_1 desktop PC
This is what looks like the back of it, and I guess the part surrounded by a circle is where I would plug the power cord of the monitor to the computer?

The monitor is a HP Pavilion 23xw 23 inch IPS LED backlit monitor J7Y75AA #ABA
It's the rope

Am I missing something here, or do I have to return this and buy another monitor? Where can I get something else that will connect the monitor to the computer?

I apologize if this sounds stupid, I'm just not tech savy.

Your graphics card HDMI, it seems that your monitor is also.

So, you can use an HDMI cable to connect your PC to your monitor.

Or you will need a VGA adapter DVI [masculine] [man].

The top connector is DVI - D [Dual Link] and only supports digital displays.

The lower connector is DVI - I [double link] and support a display either analog or digital.

If you found my answer helpful please say thank you by clicking on the icon of the thumb.
If my answer has solved your problem, please mark it as accepted Solution. Thank you!

Tags: HP Desktops

Similar Questions

  • PCoIP - Multimon and 3 monitors (1280 + 1600 + total width 1280) does not. Off the coast of PCoIP?

    When I run with PCoIP Protocol with multimon to use my 3 monitors the client starts hanging as soon as I connect to the remote desktop computer. After awhile he uses by default a resolution about the intermediate screen with 2 black screens on the sides. (it looks to its previous size by default)

    If I switch mode instead, I can stretch the window almost all the way to each side, but I think somewhere near 4000 pixels wide it stops to extend the Office inside the window.

    Do the same with the RDP protocol protocol works fine.

    I was hoping to use the PCoIP because he feels a lot snappier than the RDP Protocol when you work.

    Is this a problem of which you are aware? There may be a bug fix out?

    My version of the client is: 4.5.0 - build 293049

    But just curious you have set maximum monitors to three in the settings of your pool?

  • I need a power cord for a Macbook Pro 13 inch laptop

    I need a power cord for a Macbook Pro 13 inch laptop.  Does anyone know if you can order it from Apple, and how would you go ordering a part of Apple?

    Like this? http://www.Apple.com/shop/product/MC461LL/A/Apple-60W-MagSafe-power-adapter-for-MacBook-and-13-inch-MacBook-Pro?FNODE=85

  • Sleep icon does not appear in the power options

    I just closed the lid of my Lenovo ThinkPad T460s only once but since then I can't see "sleep" icon under options of 'power' to the main screen. How can I see the icon of sleep again?

    Hello

    The reason why sleep does not appear in the power options is your Intel graphics card.

    Please try to disable Intel graphics in the Device Manager and turn it back on.

    If it still shows yellow bang, try to download the latest Intel graphics driver from Lenovo site.

    I hope this information helps.

  • user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

    WinXP
    user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is admin

    I did a gpupdate/force and restart twice PC
    Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all users

    Hi elena_ad,

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

    http://social.technet.Microsoft.com/forums/en/winserverManagement/threads

  • the power in the system tray icon does not show me the remaining battery time

    I bought a new battery for my inspiron 1420 and the power in the system tray icon does not show me the remaining battery time, it indicates the only remaining percentage. My battery earlier showed. Can someone tell me how to show the remaining time. Thank you

    I force install quickset once again, but I installed the support center and once my system has been restarted, he began to show me both but I'm not sure, this is because the installation of support center. Thanks anyway

  • HyperV 2012 SMV "off the power" does not appear in the converter 6.1.1

    Hello

    Environment:

    HyperV 2012

    VMware Converter 6.1.1

    VMware 5.5

    I want to convert all Hyper-V in VMware virtual machines

    A virtual machine worked without any problems! Power off of the virtual machine and do normal "conversion process" - all right, but all the other VMS does not appear in the converter as soon as they are "off".

    I start VMware Converter

    -Convert the Machine

    -Source HyperV - Server (Powered off)

    that shows me all the virtual machines on the Hyper-V environment. As soon as I turned off one of the virtual machines that VM is endangered. I see not the virtual machine until I have restart the virtual machine.

    All ideas

    Thank you.

    Hello

    so, finally I had to delete all virtual machines to Cluster Hyper-V role, restart the converter on the Hyper-v host Agent, and then everything went well.

    Thanks for your help!

  • In a with two cameras a multicamera edit does not appear in the multicam monitor?

    In a multicamera CS 6 with two cameras one Assembly does not appear in the multicam monitor or rather remains black while it is present in the sequence? Is this due to lack of memory of the CPU? I have a Toshiba Tecra i5

    Thanks if anyone knows why?

    [email removed by Moderator]

    I use Adobe CS6 first

  • Monitor project and timeline window titles do not appear in the new project?

    The sequence program monitor and timeline sequence 01 does not appear on the opening of the new project, eventhough checked in the Windows space.

    All existing projects are showing the correct disposal and can be used, but I can not activate a new project except import clips into the project window.

    Any help would be appreciated.

    Operating system is 64 bit i7 and program CS5.5.2 Premiere Pro.

    Is to say, the space is there but no info that is to say, lines, titles etc. of chronology to insert clips or display in the monitor?

    Post edited by: Bob ten photographer

    Simply create the timeline (sequence) of one of your clips. In this way, it's a perfect match.

  • 24 fps video does not play in the source CS5.5 without jerky movement monitor

    Problem: 24 fps video does not play in the monitor source CS5.5 without jerky movement. 30 frame will play well. I took the same shot 24 fps, using the same exact configuration settings and it played in my CS5.0. No problem. I have them side by side and checked to make sure everything was EXACLTY the same. The 24 frames per second call played smoothly in the monitor source CS5.0 Panel. Can someone tell me what the solution might be to get the CS5.5 play smoothly? When I visited on the timeline in CS5.5 he played smoothly on the timeline. Puzzled.

    > nikon d7000

    This is probably the cause.

    See for a workaround:

    http://helpx.Adobe.com/Premiere-Pro/KB/Nikon-D7000-footage-stutters-playback.html

  • Agilent 6812 B power cord does not work with the class IVI driver

    I try to use a power source Agilent 6812 B with class IVI DISARM on RS232 driver.  I have everything set up NI Max but I can't by the initialization routine.  I tried in LabView and LabWindows and nor will not work.

    I decided to follow the lines RS232 RX/TX and I see that he is sending the "* IDN?" command and it times out before receiving a response.  Unfortunately, it does not send the Terminal newline at the end of the string.  I can cross NI MAX and send "* IDN? \n' and he responds with the ID very well.

    So my question is, would be possible that the IVI specific driver is not written correctly to send a jump as an end of line character or do I need to configure the Compote to send this character separately?  The IVI driver has been downloaded from instrumement network driver of NOR and it says it is compatible with the 6812B, but has been tested with 6813B.


  • I have a HPw2207 monitor that does not work in the vertical position operating under Windows 7 64-bit.

    I use a HP Pavilion p6-2033w PC. It was fine on XP. Any suggestions?

    Hello

    I had no problem downloading the driver for monitor for my PC.  You should be able to download and save the driver from the monitor on your PC.  Then try the installation again.

    Turn off your PC and try a reset monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

    After you download on the Windows desktop, right of the mouse on the desktop and select the resolution.  You should be able to select the desired screen orientation.

  • Pavilion 500-449: monitor screen does not work with the new HP Pavilion 500-449

    Not sure if 64-bit or 32-bit.  More HP vs 19 flat screen LCD monitor or new monitor LG Flatron E2242 will appear with new HP Paviion 500-449.  Both will be lit.  Monitor says HP VGA No. imput and goes to sleep.  LG monitor says it's to enter the mode, same thing, I guess that energy saving.  The two appear on older HP Pavilion a1430n.  Store support suggests the problem lies in the monitor menu options but they do not display with a try monitor.

    Abandoned and reduced to store.  When they were scuffered too until they tried a second monitor in the back and noticed that it connected to a different place in the back!  Seems a converter is needed for old VGA monitors and then he plugs into a completely different place.  Originally, the husband plugged the power cord VGA of my screen instead of ONLY on the back, he could go, the marked spot VGA.  No, the converter is a big plug and can only fit above in a place with NO Label at all.  On top of that, everything IS there a converter plug supplied in the box with the computer, but there is absolutely NO mention of what to do with it, or where it goes.    I feel better that the store did not know that either; Clips by the way, where the young man was very nice.    He only discovered by accident because the store had two monitors with different plugs on the end.

    Short Stort of long, if yours doesn't receive will check that plug that goes to the tower.  You may need a converter and it can even be provided.

  • H8 - 1360t: restarts power - does not work with the installed memory

    HP clubhouse, i7, Windows 7, 3 x 4 GB, discreet grahics

    The computer turns on, then immediately restarts.

    No beeps.   Monitor says 'no signal '.

    I tried

    -different (new) hard drive - no change

    -current hard disk drive shows no errors; all the data is there

    -installed the new power supply - no change

    -removed the discrete video card; used another card discrete video - no change

    -cannot test on-board DVI video because it does not have the 4 holes next to the long bar. all my vga DVI connectors have the long bar with the four holes around it (sorry I don't know the different DVI connectors)

    What works:

    When I remove the memory, it will beep seeing that no memory is installed; AND the computer continues to operate (it is not restart).

    -J' tried memory (3 of them every 4 GB) as single and pairs between 2 blue 2 black slots grids.   No change

    -J' tried another key to 2 GB - no change

    Suggestions?

    Thank you

    Darryl

    Problem was the motherboard.   Replaced by the exact type as to doesn't interfere is not with the software installed.

    Everything plugged immediately when starting on the new motherboard.   The user has a problem with software that had to be put back.

    So-

    1. If the computer won't power more than 5 seconds

    2. change the components with known good components does not change the restart without end to power on

    It is the motherboard.

    Thanks for the help.

    Darryl

  • My Acer Aspire R14 does not start with the cord of the charger plugged in with the battery connected to

    A few weeks ago, my laptop Acer Aspire R14 went totally blank. When I unplugged the power cord, it started right to the top, but at the moment where I plugged the power cord back inside would be closed. The battery dies quickly in this way, because it would not charge. I removed the battery then it started upward with the power cord. I thought it must be the battery, so I installed a new battery. which is not to change the problem.

    So, I ordered a new motherboard and after a few weeks, I received it today, installed, and I have always the same thing. It works well with the power cord plugged in until the battery is disconnected. But at the time wherever I connect the battery, everything stops, not to be revived unless I disconnect the battery.

    I need help! What could be the problem?

    Glad I could help.

Maybe you are looking for