Power of fire Access Control Policy - error after re-image

Similar Questions

• Big problem with user Microsoft Access control

  Hello

  I have to work around for CCleaner (UAC) user access control that begins after every time Windows starts as an auto start the program.

  Every time you start, I get the UAC prompt which warns me again and again.

  I don't want to disable access to the computer, but only for CCleaner user control.

  Creating a link like this: http://www.petri.co.il/bypass-uac-using-desktop-shortcut.htm there's no option for me, so I found this:

  http://www.microsoft.com/en-us/download/details.aspx?id=7352.

  I followed these instructions: http://www.ghacks.net/2010/07/08/get-rid-of-uac-prompts-with-microsofts-application-compatibility-toolkit/

  but it does not work. I always get the guests.

  What can I do?

  Thank you very much in advance

  George

  It would be impossible because it would create an immediate and global security hole.  For example, let's say you whitelist CCLeaner.  Then all viruses and Trojan horses in the world know immediately they can simply replace the file ccleaner.exe on your computer a copy of the virus and it will be automatically approved and completely take over your computer.

• rundll32exe error when tryng to access control panel

  How and where can I find a free solution for rundll\32\exe error message while tryng to access control panel

  Hello

  (1) what is the operating system that you use on the computer?
  (2) have you made changes on the computer?
  (3) what is the accurate and complete error message you get?
  Follow these methods.
  Method 1: Follow the steps in the article.
  Note: You will need a Windows XP CD to perform this operation.
   
  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  Method 2: Run the analysis of file system (CFS) auditor to repair corrupted files.

  http://support.Microsoft.com/kb/310747

  Note: You will need a Windows XP CD to perform this operation.
  I hope this helps!

• Error "could not open the access control editor, access is denied" while accessing the C: drive

  Hello

  I use Home Basic to Windows 7, I saw two drive C: / and R. /. by mistake I changed security optional properties of the discs now I can

  to access only a: .my c: drive / drive does not open when I open drive c properties, then on security and it continue display "cannot open the access control editor, access is denied.any another application do not open I can not even able to restore it, please help step by step"

  thanx

  Original title: in the c drive security permissions

  Hi Ravindra,

  Thanks for posting your question on the Forum of the Microsoft community.

  Permissions are rules associated with objects on a computer or network, such as files and folders. Permissions determine whether you can access an object and what you can do with him. For example, you might have access to a document in a shared folder on a network. Also, refer to:

  What to know before applying permissions to a file or folder

  According to your error message. I would like you try these steps and check if the problem persists.

  Steps for the reader:
   
  a. click on the drive, click Propertiesand then click the Security tab.
  b. click Advancedand then click the owner tab.
  c. click change, and then do one of the following:
  (d) to change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.
  e. to change the owner to a user or a group is listed in the change of ownership of the area, click the new owner.
  f. If you want to take ownership of the contents of the disc, select the Replace owner of subcontainers and objects of the box.
  g. click OKand then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
  h. all permissions will be replaced if you click Yes.
  i. click OK.

  Check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Directory MSDS access control error

  I'm trying to grant access to a directory phone users Jabber video and I get the following error.

  Unable to communicate with the  Provisioning Extension. See log (log-web.txt) for details. 

  Journal - web.txt

  23:15:29,641 [9] WARN  ASP.tandberg_tms_ui_phonebook_phonebooksetonuser_ascx - POST http://localhost:8788/pb/phonebooks/id/7a187c51-5da2-40a7-a214-27c4ae871ea1/acls failed: The remote server returned an error: (500) Internal Server Error.
  

  I confirmed and even updated the user used in TMSPE settings, while the health check out all green.

  Any ideas before I open a TAC case, thank you.

  Hi Patrick.

  It's a bug :) it happens when you change access control. For example, you grant access to a group, then clear, then re-enable a re.

  The only solution is to recreate the phonebook. Delete it and recreate it. It will be fixed in the next version, I think.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Error - function - access control

  Hi guys,.
  
  I was following ' ' Application Express Advanced tutorials how to build a page of access control «»
  
  But in the tutorial function would not work:
  
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e13363/ACL.htm#CHDDDFBD
  
  (Acl_custom_auth) CREATE or REPLACE FUNCTION
  p_username IN VARCHAR2,
  p_password IN VARCHAR2)
  RETURN BOOLEAN IS
  BEGIN
  C1 (SELECT 1
  Of acl_employees
  WHERE upper (userid) = upper (p_username)
  AND upper (last_name) = upper (p_password))
  LOOP
  RETURN TRUE;
  END LOOP;
  RETURN FALSE;
  END;
  /
  
  Could you please tell where is the error?
  What is "c1" service?
  
  
  Thanks in advance,
  Fateh

  You have to identify you with the ID of the table to acl_employees, with the password the same name table.
  Thus, for example:
  username: 1
  password: 'KING '.
  (including the quotation marks)
  The data in your table contains both quotes.

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Access control strategies

  Dears

  Please find attached

  I have a question for access control strategies.

  I encouraged all traffic be redirected to the power of fire.

  If the traffic is allowed by asa access list, but it is blocked by the rules of firepower, it will drop the package? Please correct me if I'm wrong

  If the traffic is allowed by asa access list, but there is no match in the policies of firepower for example traffic from inside the interface DMZ where there is no rule, it will fall into default rule action that can be default policy of intrusion, network discovery, etc. etc.

  Please tell me the created snapshot attached rule are correct, users will be able to browse the internet and application filter will work by rule 2. ????

  Yes URL categories apply only to http and https traffic web but no FTP

  Rate if helps.

  Yogesh

• Explorer.EXE error after the restoration of the ERD Commander

  Dell Inspiron B130

  Windows XP Service Pack 2

  Recently performed a HD format and new installation of XP SP2. After I installed all the drivers and others, I checked that the system was operating normally. After a few days of use, Windows Update downloaded Service Pack 3 and asked me to install. I started to install SP3, but at about 50%, the laptop battery is dead at Midway through the installation. I plugged the laptop on the power source and power. I restarted the laptop and XP started only a completely black screen and the white slider. No ALT + CTRL + DEL, desktop icons, etc.

  I rebooted the laptop of ERD Commander, ran the restore system and selected the first available Restore Point. Point of restoration chosen was recorded a few days before, and was the first recorded point after the clean installed XP. I rebooted the XP system. Wallpaper loaded with white cursor, but NO start menu or desktop icon. A message appears saying "Explorer.EXE Application error, press OK to exit the application" or something very similar. Did not write the error code, but can get if necessary. If I press the OK button (which is my only option), there is still no icons on the desktop or the start menu. Only the cursor. No access ALT + CTRL + DELETE or something like that.

  Thinking about completely wipe the system and reinstalls the operating system. Any suggestions before I jump in this solution?

  Explorer.EXE error after the Restore Point of ERD Commander. Dell Inspiron B130. Recently clean installed XP SP2 on laptop. Installation of SP3, to 50%, battery dies the laptop right in the middle of the installation of the SP3 update. Restarted, XP starts with black screen with cursor only. ERD restart order and restore XP to the last known good config (I choose point immediately after XP clean install). Reboot to XP. Now the wallpaper shows as well as the error message saying "Explorer.exe Application error, click OK to exit Explorer" dialog and then I can't access anything. Any ideas?

  Hello

  What is the full and exact error message?

  Step 1: Check if you are able to boot into safe mode without any problem. If you are able to boot into safe mode without any problems then try to perform the clean boot to safe mode. Also disconnect any external devices connected to the computer.

  Reference:
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Step 2: If you are still having the same problem, then you can the steps at the bottom of the article.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

• message from Windows 7 system is unable to open the access control editor. invalid syntax

  Hi, I recently bought this pc, asus n551jk, which came with windows 8.1, I switched to 10 windows because windows 8.1 give problems, so I had problems with windows 10 crashing on some games, so I decided to go back to windows 8.1 and all of a sudden I couldn't. don't know how windows.old has been deleted, but it wasn't the case to be found, and no, it wasn't a month yet since I went. After many crashes and intentions powerless to find a solution, I decided to go to windows 7. I installed windows 7 and had a multiboot windows option 10 and windows 7 successfully, but it was weird cos I just installed windows 7 on the c: drive, but now I had folders windows.old and windows.old000 on the c: drive and had also, folder windows on drives C and D, don't delete anything simply decided to restore my previous backup files, the files do not have restore to the usual places and it was all mess really, I had several repeated files, up to this point, everything worked perfect, so I decided to install updates and restart windows, after restarting, I realized I didn't have a multiboot option more, windows 10 had completely disappeared and had Windows 7 , and when I connected, I decided to get rid of some repeated files to free up space, and I noticed that I could not remove anything, when I clicked on delete, nothing happened, even no error message, nothing, nothing at all, I tried with several files and it remained the same. I looked for solutions on the net, tried to give me the privilege administrator cos it seemed to be the problem, then I noticed that I had 2 users, one of them which was 10 windows user and current user of windows 7, and the funny thing is that with the privilege of administrator is the user windows 10. but I can't access windows 10 more, then why? How is that possible? I have still two files windows.old, why have I lost access to the windows 10? It didn't remove boot options. then I went to windows.old000 and rendering account this is the folder that I had the privilege of administrator to the course, I could remove/change anything in this file outside of this folder, I couldn't do anything else, I could access the older records, but I could not change or do something with them and once again windows.old000 is on the c: drive, on which I have windows 7 installed. And why have I lost access to the windows 10 if I never deleted it, not even by mistake. and I've tried the command cmd / active: Yes NET LOG ADMIN and that I received was that USER cannot NOT BE FOUND. so I would be grateful if anyone can help cos im frustrated, I don't want to go back to windows 8.1, I have the drive, but its got a lot of questions. Thanks in advance-

  Hello

  Welcome to the Microsoft community.

  Since the beginning of the question and not tried troubleshooting, there seems to be a lot of mixing upwards and there might be conflicts on Windows files for each installation. The best option recommended for everything what you back up data and start with the new facility.

  However, you can refer to the suggestions posted by Shishira D and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cant-open-access-control-editor-access-is-denied/0b938de0-620C-417f-a2b6-50a9c7f58766?DB=5

  The steps include also the right command to activate by default. You can enable the default Administrator and check if you are able to access your data in the default administrator user account.

  Hope this information helps.

• Firepower does not work when using the Active Directory group as a rule filter access control

  I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

  -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

  -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

  -J' created a politics of identity with passive authentication (using the field I created)

  -Can I use the AD account "user" as a filter in access control rule and it work very well.

  However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

  I use

  -User agent firepower for Active Directory v2.3 build 10.

  -ASA 5515 software Version 9.5 (2)

  -Fire version 6.0.0 - 1005 power module

  -Firepower for VMWare Management Center

  Any suggestion would be appreciated. Thanks in advance.

  Hello

  You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

  Thank you

  Yogesh

• Power of fire time SYN with Firesight

  Dear,

  My fire power is not synchronized with system for time firesight, firesight is synchronized with an ntp server but firepower is not synchronized, how I can set the clock/NTP in firepower.as I know initial installation, we get an option ntp but now the power of fire is already set up and I get no CLI option to configure NTP

  Thank you

  Adam,

  Allow you to control the 99% of a module of firepower (on SAA) Management Center of firepower (new name for FireSIGHT Management Center for the defence of AKA) or stand-alone unit does, including the definition of the NTP server.

  As indicated in the document, create or modify a strategy of firepower to define time synchronization settings. Save it and deploy it to your devices and they will be updated with this policy.

  See the following screenshot of the example (open in a new tab to zoom in):

  Policy setting Module of firepower to NTP

  

• WARNING 1336: The structure of access control list (ACL) is not valid

  Security permissions are stripped on Win 7 32 bit.  Trying to restore default

  Followed the instructions to reset default command-line following running as administrator - results to the newspaper below

  secedit / configure / db /cfg %windir%\inf\defltbase.inf defltbase.sdb / verbose

  How can I fix the structure of the access control list?

  Log file:

  December-14-10 09:38:47
  -Configuration engine was initialized successfully.-

  -Model of reading Configuration information...

  -Rights of the user to configure...
  SeImpersonatePrivilege must be attributed to administrators. This setting is defined.
  SeImpersonatePrivilege must be assigned to the SERVICE. This setting is defined.
  Configure the S-1-5-18.
  Remove SeShutdownPrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1004.
  Remove SeNetworkLogonRight.
  Remove SeBatchLogonRight.
  Remove SeServiceLogonRight.
  Remove SeDenyInteractiveLogonRight.
  delete SeDenyRemoteInteractiveLogonRight.
  Remove SeImpersonatePrivilege.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1005.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1006.
  Remove SeServiceLogonRight.
  Configure S-1-5-21-4262353681-2820704222-1343016971-1008.
  delete SeDenyBatchLogonRight.
  Remove SeDenyInteractiveLogonRight.
  Configure the S-1-5-32.
  Remove SeServiceLogonRight.
  Configure the S-1-5-19.
  Configure the S-1-5-20.
  Remove SeServiceLogonRight.
  Configure S-1-5-32-544.
  Configure S-1-5-32-551.
  Configure S-1-5-32-559.
  Configure S-1-5-32-545.
  Configure the S-1-1-0.
  Configure the S-1-5-6.
  Configure S-1-5-21-4262353681-2820704222-1343016971-501.
  Add SeDenyNetworkLogonRight.
  Configure S-1-5-32-555.
  Configure S-1-5-80-0.
  Configure S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420.

  User rights configuration was completed successfully.

  -Configure the group membership...
  Set up users.
  remove the Bob-PC\ASPNET.

  Group membership configuration was completed successfully.

  -Configure registry keys...
  Configure users\.default.
  Configure machine\software.
  WARNING 1336: Access control list (ACL) structure is not valid.
  Error setting security on machine\software\Licenses.

  Configuration of registry keys was completed by one or more errors.

  -Configure file security...
  Configure c:\program files\common files\speechengines\microsoft\tts.
  WARNING 2: The system cannot find the specified file.
  Error safe on c:\program files\common files\speechengines\microsoft\tts.
  Configure c:\programdata\microsoft\windows\drm.
  Configure c:\programdata\microsoft\windows\drm\cache.
  Configure c:\windows\repair\default.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\default.
  Configure c:\windows\repair\ntuser.dat.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\ntuser.dat.
  Configure c:\windows\repair\sam.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\sam.
  Configure c:\windows\repair\security.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\security.
  Configure c:\windows\repair\software.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\software.
  Configure c:\windows\repair\system.
  WARNING 3: The system does not have the specified path.
  Error setting security on c:\windows\repair\system.
  Configure c:\windows\system32\windows media.
  WARNING 2: The system cannot find the specified file.
  Error on c:\windows\system32\windows media safe.

  File security configuration was completed successfully.

  -Set up the parameters of the General Service officer...
  Configure the sysmonlog.
  Error 1060: The specified service does not exist as an installed service.
  Error opening sysmonlog.
  Configure SamSs.
  Configure ntmssvc.
  Error 1060: The specified service does not exist as an installed service.
  Error opening ntmssvc.
  Configure netddedsdm.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netddedsdm.
  Configure netdde.
  Error 1060: The specified service does not exist as an installed service.
  Error opening netdde.
  Configure dmserver.
  Error 1060: The specified service does not exist as an installed service.
  Error opening dmserver.
  Configure clipsrv.
  Error 1060: The specified service does not exist as an installed service.
  Error opening clipsrv.
  Configure the browser.

  Agent of General Service configuration was completed successfully.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  -Configure security policy...
  Configure password information.
  The administrator account is disabled.
  Guest account is disabled.

  Access configuration was completed successfully.
  Search anonymous LSA appoints setting: existing SD = D: (D; 0 X 800;) (A) (; xf1fff 0;) BA) (; 0 x 20801;) WD) (; 0 x 801;) (A) (a. 0x1000;) LS) (a. 0x1000;) NS) (a. 0x1000;) S-1-5-17).
  Configure the setting LSA anonymous search.
  Set up the nt\currentversion\setup\recoveryconsole\securitylevel machine.
  Set up the nt\currentversion\setup\recoveryconsole\setcommand machine.
  Set up the nt\currentversion\winlogon\scremoveoption machine.
  Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
  Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
  Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
  Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
  Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
  Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
  Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
  Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
  Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
  Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
  Configure machine\system\currentcontrolset\control\lsa\forceguest.
  Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
  Configure machine\system\currentcontrolset\control\lsa\nolmhash.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
  Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
  Configure machine\system\currentcontrolset\control\print\providers\lanman printing services\servers\addprinterdrivers.
  Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
  Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
  Configure machine\system\currentcontrolset\control\session manager\protectionmode.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
  Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
  Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.

  Registry values configuration completed successfully.
  Configure the log settings.

  Configuration of the audit / log has been successfully completed.

  -Configure available attachment engines...

  Attachment engines configuration completed successfully.

  Engine - UN-initialize configuration...

  Hello

  See if the continuation of the measures on this blog help repair the ACL: http://blogs.msdn.com/b/astebner/archive/2006/09/04/739820.aspx

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you ask the ORA-24247 utl_http package: access denied by access control (ACL) of network list

  Dear all,

  Need your help please.

  Do in the face of ora 24247 network denial of access (ACL) even after following the procedure below. It was working fine until today where I did just drop and recreate again.

  BANNER

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  CORE 11.2.0.1.0 Production

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production

  Steps to follow:

  Created an ACL with a user database and awarded connect, solve privilege.

  Start

  (DBMS_NETWORK_ACL_ADMIN). CREATE_ACL

  ACL = > "utl_http.xml"

  Description = > "HTTP access.

  main = > 'TPAUSER ',.

  IS_GRANT = > TRUE,

  privilege = > 'connection ',.

  start_date = > null,

  End_date = > null);

  (DBMS_NETWORK_ACL_ADMIN). ADD_PRIVILEGE

  ACL = > "utl_http.xml"

  main = > 'TPAUSER ',.

  IS_GRANT = > TRUE,

  privilege = > 'connection ',.

  start_date = > null,

  End_date = > null);

  (DBMS_NETWORK_ACL_ADMIN). ADD_PRIVILEGE

  ACL = > "utl_http.xml"

  main = > 'TPAUSER ',.

  IS_GRANT = > TRUE,

  privilege = > 'address');

  (DBMS_NETWORK_ACL_ADMIN). ASSIGN_ACL

  ACL = > "utl_http.xml"

  Home = > ' *',

  lower_port = > 80,

  upper_port = > 80);

  commit;

  end;

  Confirmed the ACL configuration.

  Select * from dba_network_acls;

  HOST

  LOWER_PORT

  UPPER_PORT

  ACL

  ACLID

  
  Select the hosts, lower_port, upper_port, acl in dba_network_acls where ACL='/sys/acls/utl_http.xml';

  HOST LOWER_PORT UPPER_PORT ACL

  * 80 80 /sys/acls/utl_http.xml

  
  SELECT the ACL, PRINCIPAL, PRIVILEGE, IS_GRANT FROM dba_network_acl_privileges where main = "TPAUSER."

  
  

  ACL

  MAIN

  PRIVILEGE

  IS_GRANT

  /sys/ACLs/utl_http.XML	TPAUSER	connect	true
  /sys/ACLs/utl_http.XML	TPAUSER	solve the	true

  
  

  
  

  -grant execute on utp_http to TPAUSER;

  
  

  The performance of the procedure I have encountered the error message below. Don't know what step i missed here.

  
  

  ORA-29261: bad argument

  ORA-06512: at "SYS." UTL_HTTP", line 1525

  ORA-06512: at "TPAUSER. SEND_SMS_NEW', line 70

  ORA-24247: network access denied by access control list (ACL)

  ORA-06512: at line 18 level

  Your valuable support and help to get this issue resolved will be highly appreciated.

  Kind regards

  Syed

  Thank you for all.

  Problem solved in giving a superior port 8080.

  (DBMS_NETWORK_ACL_ADMIN). ASSIGN_ACL

  ACL-online "utl_http.xml."

  the host => ' *'.

  lower_port-online 80

  upper_port-online 8080

• "Assign access control" on essbase applications through shared services

  Hi Experts,

  I just install an Essbase 11.1.2.4 environment, where I could see that the ability to assign filters to users in environmental assessments is disabled (I guess maybe it's that this version does not support the autonomous concept).

  So I thought of attribution of the filters to users through shared services groups\Essbaseinstance1\sampleapp Application - access entitlement control, but when I click on "Assign access control", it says in the right pane that the page cannot be displayed.

  Any tips?  for your information, I use IE 11.

  Thank you

  Siva

  I gather from your question that EAS runs like it enough to be upward, as you did that you have configured the web server again after that the configuration of the Regional service otherwise it will be a communication error.

  See you soon

  John