Power of fire effect registration of managed devices Management Center?

Hello

I have a solution that was rolled out with an incorrect hostname of the Manager of FMC on each managed SFR.

When you do a show module sfr, I get the correct ip address for CME.

First question :

1 / is the name of the CMF locally on each managed SFR arbitrary? My ASA see the output reveals that the LICO sees the correct ip address for our CME. But our SFR currently has a host name incorrect due to an incorrect/old dns at configuration time record

For example

ASA CLI

View details of sfr module


Addr DC: X.X.X.X (ip address)

connected to the sfr module

console session sfr

> Display managers
Type: Manager
Host: incorrect.name.com (which is no longer corresponds to the IP above)
Inscription: finished

Second Question

Can I change the hostname of a CME without registration of effect to all managed devices or the SSL certificate? The company wants to use firepower.internal.different.com

For example,.

CMF hostname is currently

Firepower.Name.com

DNS for its ip address is now

Firepower.Internal.different.com

The SSL certificate currently refers to CN of firepower

You can change the host name by using the following command: -.

> set up network hostname ABCDEF

Its best to re-register the device once more. When you save the unit, it will automatically create a UUID between the Firesight and firepower to keep the communication channel. In your case if the UUID is the host name and you change the host name after registration of the device then it can lead to problems of connectivity communication channel.

Tags: Cisco Security

Similar Questions

  • The traffic load between the power of Cisco ASA and FireSight Management Center fire

    Hi all

    I have a stupid question to ask.

    Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?

    Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.

    Maybe you all have no idea to provide.

    It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.

    Generally it is not a heavy load, however.

  • Power of fire vs NGIPS vs FireSight vs power of fire management center

    I am struggling to understand the distinction between these terms. Is anyone able to help me understand what are the components?

    Firepower is the term that Cisco uses during most of the acquis of Sourcefire products.

    FMC

    Power of fire aka Firesight Management Center aka Defense Center Management Center.
    Power of fire management centre was re-branded twice, its all the same

    Centralized management for devices of firepower (NGIPS, Module of ASA firepower, DFT)

    NGIPS

    Dedicated appliance IPS / IPS component of the solution of firepower (also used on the firepower of ASA and DFT module)

    ASA with power of Fire Services

    ASA with module of software/hardware that is running the services of firepower. (is two different images running on the same box. Traffic is redirected to the module of firepower for Layer 7 inspection)

    FTD

    Power of fire Threat Defense is the new unified combining image Software ASA and firepower into a single image. (not full parity of features to ASA still)

    If you need more let me know.

  • Power of fire licensing management center

    I'm someone who is confused by the license, I hope someone can clarify this.

    I have a Cisco ASA5506X test setup that has the URL, AMP, IPS key installed via ASDM.

    I downloaded the power of fire. Mgmt Center 6.1.0 VM and tried to connect to the ASA.

    I wanted to use the eval. period of check of FMC.

    However, it seems that the licensing of the ASA does not apply to the CSP. Can I need separate licenses for FMC in addition to those on the SAA or do I have to reinstall these licenses on the CMF?

    You must first register the ASA of CMF (and vice versa) and then apply the CME licenses ASA newly managed.

    Licenses of firepower are linked to the license key (combination of model platform ID and MAC address) of the FMC Manager so you should rehost those you used initially ASDM.

    You can only manage a service module firepower since one - or the CMF-based ASDM - Manager at a time.

  • Fire power User Agent is unable to connect with the power of fire management center

    Hi Cisco supports,

    I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

    My Version of power of fire management centre is 6.0.0.1

    and my 2.3 10 User Agent

    Hello

    You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

    You can capture packets on FMC cli and check if traffic reaches here.

    > tcpdump-i eth0 port 3306

  • Time synchronization between the module of SFR (ASA5512) and the power of fire management center

    Hello.

    I deploy my network Cisco Management Center (for VMWare, v. 6.0.0) FirePOWER and tie SFR-module of Cisco ASA 5512. After you apply time in CMF settings, I have a synchronization errors for my module SFR ("TimeFor 172.16.x.x synchronization state is out-of-sync").

    This article presents a framework that allow the synchronization time SFR-module with CMF. But I don't have an option to set the time on managed devices, just for the CMF.

    Please, tell me how I can solve this problem. Thank you!

    I just went through this with TAC.  They pointed out that the documentation states that you should not synchronize SFR with a virtual CMF.  I found myself defining the CMF and SFR as you pull my domain controller, and everything was fine.

  • Power of fire time SYN with Firesight

    Dear,

    My fire power is not synchronized with system for time firesight, firesight is synchronized with an ntp server but firepower is not synchronized, how I can set the clock/NTP in firepower.as I know initial installation, we get an option ntp but now the power of fire is already set up and I get no CLI option to configure NTP

    Thank you

    Adam,

    Allow you to control the 99% of a module of firepower (on SAA) Management Center of firepower (new name for FireSIGHT Management Center for the defence of AKA) or stand-alone unit does, including the definition of the NTP server.

    As indicated in the document, create or modify a strategy of firepower to define time synchronization settings. Save it and deploy it to your devices and they will be updated with this policy.

    See the following screenshot of the example (open in a new tab to zoom in):

  • OpenDNS to power of fire included?

    Hello

    can you please give a clue if OpenDNS feature is included in the software Cisco firepower? Or in other words: does make sense to have the internet to inspect with SourceFire and also configured OpenDNS feature traffic?

    Thank you in advance!

    Kind regards

    David

    Hello David,.

    OpenDNS will certainly help us in our environment. OpenDNS will block all CnC, Malcious, bad reputation, known bad research. This intelligence is based on OpenDNS intelligence and intelligence added via Cisco TALOS, AMP ThreatGrid, etc.

    This helps us in 2 ways,

    1. block all traffic, any port, any protocol, North-South and East-West (not all traffic will be inspected by the power of fire, we would need IPS/IDS spread across network devices).
    2. If the traffic is getting inspected by the power of fire, OpenDNS can mitigate a known threat before that firepower get traffic for inspection

    I hope this helps.

    Kind regards

    Guillaume

  • Cisco ASA with the power of fire vs Cisco IPS Appliance

    Hello

    Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

    Thank you very much!

    Kind regards

    David

    Hello team,

    The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

    Rate of good will if this post helps you.

    Concerning
    Jetsy

  • Need help - Cisco ASA with the power of fire

    Hello

    Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

    Is it possible if we add firepower on asa 5510... Please guide me... Thank you

    Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

    If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

    Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

    Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

    If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

    You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

    Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

  • Management Center of power of light 6.0 - not seeing any output sensor of firepower

    Hello people,

    I just deployed a light inline power meter and added to the CMF 6.0.  I created a simple access with intrusion prevention strategy.

    It has been in service for 3 hours and I see nothing in the management console.

    The policy plan is set up and access list see partition.

    Someone at - it a guide for the creation of a strategy of access control on the center of power of fire management, specifically 6.0 beginners?  5.4 work with another client, I...

    Thanks in advance! :)

    Martin

    Hello

    You can probably check if logging is enabled on this rule.

    Policies are more or less same 5.4 and 6.0. If traffic matches the default rule, make sure that logging is enabled it.

  • Installation of the power of fire

    Hey everybody

    I also ordered the firepower for my 5555-X and recived an SSD and a number of PAK.

    I think I heard somewhere that I need two 120SSD disks, I have one. Is this enough?

    And what is the correct order:

    1 stop/uninstall old IPS

    2. Insert the SSD

    3 reload

    4. install the power of fire

    Thanx

    J.

    5555-X is designed to be used with two SSDS in a RAID 1 array.

    It will work with one but will not have a RAID protection.

    (edit - corrected the Raid type to '1').

  • ASA with the power of fire, no need for the license of botnet?

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    See you soon

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
    2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

    See you soon

    -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

    Double - answered in the other display.

  • I'm under 10.7.5 when I opened after effects CC application manager opens, then crashes... ideas?

    I'm under 10.7.5 when I opened after effects CC application manager opens, then crashes... ideas?

    Follow the procedure below


    N ° 1)

    Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

    (Applications > Utiliites)

    Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

    Step 2)

    Trash Adobe Creative cloud folder from Applications as well.

    Step 3)


    (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

    (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

    ~/Library

    (3) then navigate to Application Support > Adobe.

    Open file Adobe and trash folders named AAMUpdater and OOBE.

    Step 4)

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.

    (2) you will get a text box, type in the following command and then press the 'return '.

    / Library

    (3) then navigate to Application Support > Adobe.

    Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

    Step 5)

    Click on the link below and download & run the cleaning of Adobe tool:

    Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

    http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

    Step 6)

    Click on the link below and download Adobe Application Manager and install the same:

    http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

    Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

    Once the update is complete. He shud launch Adobe Creative Cloud app.

    Then try to launch applications installed CC.

  • Power of fire-URL blocking - how to see the hosts?

    Hello

    I work with the implementation of a system of firepower on an ASA5525X. I activated the blocking of certain categories of URL, it works fine and I can see that a number of classes of forbiddel connections is arrested. But how it go down and see what internal hosts attempt to access the URL forbiddel? Standard reports or dashboards that gives this information?

    Kind regards

    Thor-Egil

    Hello, what are you using for the configuration of the module of firepower? ASDM or firepower Management Center (FMC)? In WCF, you can get detailed information about each transaction in the tab analysis-> connection-> events. Please, see the attachment.

    But first, you must configure journaling in access policies.

Maybe you are looking for