power of incompatibility input (laser jet p1102 pro hp)

Hello

I bought a printer p1102 considering that it will work for 110 ac and AC 220 but when I tried to install the CA 220-240, 50/60 Hz wrriten system on the back of the it. Is it posible that it will work on 110 AC because my current environment doesent supports 220 AC

Based on the technical specifications, there are two type of difference in the model:

MODEL specification 110 volts 220 volts

Power supply requirements
  • 115 to 127 V (+/-10%)

Tags: HP Printers

Similar Questions

  • Laser Jet P1102s: Win7Control Laser Jet P1102s Panel question

    After the successful installation of my new Laser Jet P1102s on Windows 7 (32 bit), I found two icons in the control panel (see attachment). One is on the right side OK - the printer works well. But there is a sort of warning sign near the left ikon. Someone knows the reason or the sense of that?

    THX

    Hi Hegefer,

    Thanks for letting me know that the icon was not restarted.

    I think that's the Smart Install which automatically load the printer again on the restart and we can simply turn off so that it will not continue.

    Here are the instructions if you want to proceed when you have time.

    Follow these steps to disable the Smart Install. Select printer not PC:

    On the Windows computer, go to start, computer, right-click the CD for the

    printer and left click Open in a new window, go to smart util/siutility.exe/HP install utility.
    Shows printer or PC - select printer.
    Then click on disable.

    Have a great weekend!

  • HP Laser Jet P1102 wireless linux OS... ?

    How can I set up a wireless HP Laser Jet P1102 printer to work with an OS linux.. ?

    Dave

    DWArveyess,

    This site should help with drivers and install:

    http://hplipopensource.com/hplip-Web/index.html

    Good luck!

  • When I give a print, only blank page comes my printer is HP Laser Jet P1102

    When I give a print, only blank page comes my printer is HP Laser Jet P1102

    Hi aremps,

    1 did you changes to the computer before the show?
    2. what operating system you have installed in the computer?

    This problem can occur because the print settings cartridge. Check your ink cartridges to see if you are out of ink. Refer to the printer manual for settings and troubleshooting.

    Please select the operating system and follow the instructions to solve the problem:
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en

    Please report if you are still having the problem. I will be happy to provide you with additional options.

  • IHAVE hp laser jet p1102 and hp laser jet1020

    IHAVE hp laser jet p1102 and hp laser jet1020 and ihve macbook air iwont software for printers thank u

    Here is a link that will provide you with the software and the driver for the LaserJet P1102.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=219&LC=en&cc=us&DLC=en&sw_lang=&product=4110304#n190

    Sorry, the LaserJet 1020 is not compatible with the Mac software.

  • laser jet p1102: survey

    How do I know when I need ink or ink level?

    Hi @eslam_shehata,

    Welcome to the Forums of HP Support!

    I understand that you are looking for information on how to check the level of ink for your printer HP Laserjet P1102. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Here are a few ways to check your printer ink levels.

    Print a Configuration page

    Use one of the following methods to print a Setup page.

  • My printer print 2 Facer habit any more laser jet P1102 hp

    I'm running Mac os x 10.8.2 and until there is about 3 weeks, I was able to print double-sided (manual feed) I would get a little pop box telling me to push go once I put the 1 series of documents that came the printer threw it into the tray to paper to begin the second side.

    I get MORE than the box more and now nothing will print 2 sides because of this, the printer says he's waiting for me, but no. box *.

    Normally, I have to print PDF slides for the school with 100 + slides by chapter, so I use slides mutiple by option of the page and use the front two but now nothing will print 2 Facer. Not even the Pages, or text editior will print on 2 sides, due to the printer "pop up box" just never came up. Help, please

    I tried to delete the printer, adding the printer again, update drivers, I even restored my count to an earlier saved version of the Jan 4. I'm willing to try anything at this point and I ran out of my own ideas.

    On another forum, someone suggested opening and closing of the compartment of toner instead of press 'ok '.

    Low Tech, but maybe it will work.

    HGW

  • HP LASER JET P1102: Scanner error Laserjet P1102 52.0 Professional

    Hi, I need some help or advice I can't use my printer 3 months when I try to print I get an error message like this "scanner error of 52.0!"

    I want to find a solution for this problem!

    Hi @CAMARAIZ,

    In addition to my post, if you are unable to print the 'Page or report Configuration' there is a hardware problem. Try the hard reset and if the problem persists, contact HP.

    Contact HP for service in all countries except Asia-Pacific.
  • Laser Jet MFP 127fw Pro

    I have a Laser Jet MFP Pro 127fw. I can scan by clicking on the icon to scan on my desk. Is there a way I can add an option to scan for the small screen on the printter where icons for 'Copy', 'Fax' and the 'Apps' icons appear? Or do I always have to run a scan directly from my PC?  Thank you.

    Hello @jvelazquez, thank you for this question! I will do my best to help you today.

    From what I understand you do all your scans of computer software. Ask yourself if you are able to download a scan icon on the front of the printer display panel.

    Here is a link to the user for your MFP HP LaserJet Pro 127fw guide. User's guide.

    From what I see, what you ask is not an option on this model. We hope this isn't too much of an inconvenience for you.

    Thanks a lot for your time! Can't wait to hear back on your part! Have a great week.

  • laser jet

    My HP Laser Jet P1102 does not recognize that I have installed a new toner cartridge - still to come up with "out of toner" alert. I tried off, reinstall the cartridge and generally fiddling around with it but not joy.  She also refuses to notice when I replaced the paper after the execution of work environment or put paper in the tray to print side 2 - he's there flashing message 'replace paper' until I have give it away and remove work - help please!

    Let's try the second kind of reset mentioned in this video, because it seems that your printer has difficulties to recognize its sensors.

    http://www.YouTube.com/watch?v=31TbWMrTaFk

    Before unplugging the printer, I remove the paper and toner and replace them after back on the powers of the printer.

    In addition, I've seen a number of little problems like this problem by changing the configuration. How the printer is connected to the power supply? Is it connected directly to a wall jack or a limiter of surge, backup battery or power strip? Here's a post I did on the importance of this.

    http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/power-supply-related-issues/TD-p/2184769

    Let me know how it goes!

  • HP P1102 Pro LaserJet printer

    How can I have emulation standard ibm on my printer laser jet p1102 and language grk437 pro?

    Unfortunately, this isn't a story about this printer model, on some of the activities of high-end models have this capability or can be customized with this built-in feature, but this primary consumer based model does not have the feature.

    I apologize for the inconvenience this might cause.

    Have a wonderful day!

    -Spencer

    However, just to be certain you know exactly what you want to do with a little more deatail? I can look further in this if need be.

  • Laser Jet MFP M127FW Pro: Will not stop "hologram fax page 1" and is stuck in this mode

    I have Laser Jet Pro MFP M127FW.  This morning, a fax came through, and printed, however, the touchscreen rpet ' Print Fax: 1 Page, "with absolutely nothing to print.  I can now no longer print documents, or send and receive faxes again.    When I leave on this screen, the message disappears and comes back about a minute later for inactivity.  I tried to unplug and plug the unit in the.  I tried to use the switch to stop the machine.  When the powers of the slot machine, he will immediately return to the ' print fax Page: 1. " I tried clear memory and also the power resets. I keep reading on a Ret NVRAM and I would try it, but can't find anywhere it is displayed!

    It is a real problem for me because I use the fax machine throughout the day!  Can someone help me?  Thank you so much in advance!

    Hey @nhorn1115,

    Welcome to the Forums of HP Support!

    I understand that you have a fax job that will not print from your printer Laserjet M127fw range. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. When done, remove the cable from the back of the printer's fax. Now:

    1. Click on the configuration icon that looks like a key.
    2. Click on Service.
    3. Click Fax Service.
    4. Click clear saved faxes.
    5. Connect the cable of the fax.

    Please let me know if this clears the stuck fax. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

    Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

    Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

    Removed and reinstalled HP provided the CD with the same results.

    Test print at the end of installation OK.

    When you try to print from Outlook 2003, Windows 10 returned two error messages

    It said printer error state.

    Other says something about outbind failure.

    Same feeling of failure for Adobe 11.0.12.

    Word and Excel also

    Name of the default printer in Windows print Manger is:

    HP LaserJet MFP M127-M128 PCLmS Pro.

    HP "AUTOFIND PRODCUTS" set ID's of this printer as:

    MFP HP LaserJet Pro M1136

    Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

    Installed an AVAILABLE to update the printer driver.

    Not until the 'WITHDRAWAL of POWER' to restart.

    Everything looks OK now.

  • LASER JET PRO M402N: ERROR

    I RECENTLY BOUGHT A HP LASER JET PRO M402N PRINTER AND A DUNGEON 55,0602 ERROR. IT ME SAYS TO TURN OFF PRINTER AND THEN TURN ON, BUT I DID THAT SEVERAL TIMES AND IT STILL GIVES THE ERROR.

    Hello @STEVEP2

    You can try this

    A.Eteignez the power supply using the power switch and then wait at least 30 seconds.

    b on the power and waiting for the product to be initialized.

    2. If you use a surge protector:

    power off the printer.

    b the surge protector.

    c.Plug the product directly into the wall outlet and turn the product market.

    If you still see the same error on the screen, you can call 888 447 0078 ext 336 for the United States and Canada for a call of guarantee as mentioned that the controller DC PCB Assembly needs to be replaced

  • Laser Jet Pro CM1415 model cold color MFP

    I have a HP Laser Jet Pro CM1415 model cold color MFP model # CE862A. He jumped because of a power surge and the local hydro company is taken full responsibility and is willing to replace my camera. I can't find a comparable unit to give them as he does not seem as Lexmark sells the most. Which model do you propose that I propose to replace?

    Thank you

    Models of different devices will be available for different regions of the world and you can browse your specific country hp.com web portal or visit the nearest HP sales partner/Office for more details.

Maybe you are looking for

  • How can I get rid of a url unwanted that autocompletes when I start typing.

    I have a URL for my car: firsttechfed.com but when I type in the tree, the system automatically fills in with: firsttechfcu.com, an advertisement site. So, every time I want to go to my site CU that I have to type the full name. I want to get rid of

  • Satellite P200 - unexplained MIDI file problem message

    Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.» I have no problem with the sound, DVD, MP3 etc.No explanation and how can I

  • EliteBook 2540p: software of the camera not found or does not

    In my book it is built in camera. I want to capture still image with it. But I have not found any camera software therefor. Please give me a software camera matched with my model. Note that I have already installed driver webcam.

  • customer url redirection

    Hello because 2 months I am developing an application, I'm stuck in one or other problems. I'm this difficukt because I have not basic java, I know nothing, as java application mobile e.t.c May I be question is stupid... don't answer me if it's so si

  • Preverify error: wrong name

    1. build the Jar file: I created a java project that uses only the api net_rim_api.jar, then I add her to JAR file:   2 preverify: C:\Program Research In Motion\BlackBerry JDE 4.2.1\bin > preverify.exe - classpath "C:\Program research in Motion\Black