Power Save Polling (PSP) leads to problems in connection with some access points
- Intermittent loss of Wi - Fi
- Unable to open a connection Wi - Fi
- Poor Wi - Fi connection data performance
These symptoms may be more pronounced when on battery.
Socorro
Heard different things people try, depending on their wireless adapter.
Start, control panel, device, netowrk, their adapter, power management Manager. Clear the checkbox to allow windows to turn off this device to save power
Start, control panel, device, netowrk, their adapter, advanced management. Looking for antenna diversity. Some cards have it and others don't. Replace the Auto antenna by supply diversity
Some have disabled Wireless N of their card and achieved good results.
Some Wireless N adapters operate ONLY on the 2.4 GHz frequency.
Using these parameters of the recommended wireless router I use channel 11, have GREAT results. I usually recommend creating a new SSID to make the connection easier. Wireless devices also needs to connect to the NEW network.
Rick
Tags: Dell Products
Similar Questions
-
having problem to connect with itunes and update my iphone
I have problem to connect with itunes and update my iphone. Everyone that nows how to fix this?
What do you mean by communicating with itunes?
In any case, ask in the Forums of Apple:
https://discussions.Apple.com/index.jspa -
Hi Please help me. My iPhone 6 retains what load noise when connected with my MacBook Air early 2015. It makes me crazy! I tried with several real Apple's USB cables, update to the latest iOS (phone and MacBook), updated the iTunes, clean the orifices, everything! I just got this MacBook on the Apple store. Please help me! Thanks in advance!
Hi mikaelaridz,
I understand that you just bought a MacBook Air in an Apple store, and when you plug your iPhone 6 in it, you are to hear a sound indicating that the connection does not work. If your MacBook Air has a port USB - C, you must use the USB - C for Lightning cable to connect your iPhone.
Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later
Port USB - C
USB - C is an industry standard generation that allows to load and transfer of video data - while a simple connector. Your MacBook comes with a USB - C port:
Through this port, you can:
- Charge your MacBook.
- Power output.
- Transfer data between your MacBook and other devices.
- Connect the video output such as HDMI, VGA and DisplayPort.
- Connect to other technologies, such as Ethernet.
Port USB - C on your MacBook supports data transfer speeds to up to 5 Gbps (USB 3.1 Gen 1).
USB - C for Lightning cable
Apple USB-C for Lightning cable allows you to connect any device equipped with a connector of lightning with your MacBook. It provides data transfer and power of lighting fixtures. For example, you can use this cable to connect your MacBook to these devices:
- iPhone, iPad and iPod touch
- Magic Mouse 2
- Magic keyboard
- The Magic Trackpad 2
You can also load these devices without using your MacBook by connecting to the C - USB to the lightning cable and plug the cable of the USB - C 29W power adapter.
USB - C for Lightning cable supports data transfer at up to 5 Gbps (USB 3.1 Gen 1).
This cable requires no power to operate. However, devices that you plug into it could draw power from your MacBook, you should unplug it when you're not using it.
If this isn't the issue, then I suggest taking your new MacBook Air and iPhone at the Apple Storewhere you bought it. A genius can inspect your computer for you, there is no hardware problems and staff can help you set up. Here's how Contact Apple and make an appointment.
Take care
-
Problem with internet access point
Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:
I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.
This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.
PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!
See links.
How to install a TP-LINK wireless routers (Recommended)?
http://www.TP-link.com/LK/article/?faqid=92
Why can I not access the Internet after connecting the TP-LINK router to my modem.
http://www.TP-link.com/LK/article/?faqid=138
TP-Link FAQ.
-
Problem of password/username to some access points
For some reason I can't access "manage the Extensions' of my creative cloud... says my password does not match my user name. The same thing when I try to access my applications through the program that is put on the desktop. However, all other access points work for my name/password user, who did a reset. Do not know what is happening.
Well, I'll explain better. My problem is that ove all this advice: desktop application the CC told me that 'I was out"whenever I try to use it. Ridiculous. Adobe needs to solve the problem. I'm NOT a programmer - I'm a photographer - and I expect Adobe to fix the probem. I won't go through a bunch of jibberish coding to try to fix a known bug. And this bug IS known. Everything you need to look at this map. GET IT FIXED!
-
Problems of connectivity with Windows Messenger.
The next person is online, but couldn't participate in this conversation:
Once in awhile I have trouble to sign in our office group, the other 2 in the office are able to connect, but somehow, I get this pink screen that is Windows Live (I think that if has anything to do with hotmail messenger?), but when this screen appears, I end up having a wire connection trouble. then when I finally find the window that I use - I get this message "the following person is online, but couldn't participate in this conversation:" it's so weird - I can't even answer how I finally corrected the last time this happens because I'm end up doing all sorts of things until I finally somehow end up getting? A lot of times I don't even try to connect until I see that at least someone else is signed in question, if I connect me before that - I end up getting that pink windows live screen which ends up screwing everything up. Please help-
Anita Sorensen
Lloyd Bultsma Trucking
Group name: lloydbultsma trucking
If you have any problem with Windows Live Messenger, it is up to the solution Center Windows Live Messenger Forums - Messenger discussions section:
-
Problems of connectivity with R-2621xm, S-2950
Hello, I have a 2621xm router and a Fa 2950 (24 ports) switch. I have a problem for the WAN switch outside, when I run a ping test when you are connected to the cable on the router console, it works fine. DHCP works very well for VLANs and I can ping other Vlans on the switch. I can ping the router via the switch, when it is connected to the console of the switch port, I cannot ping anything. In addition, the router get assigned an IP through my cable modem. Any advice would be much appreciated. It is just a laboratory at home but has been a learning experience!
Below are the files of the running-config:
Router:
FA0/0: dhcp ip address
WAN-outside
FA0/1: ip 10.0.1.1/24
LAN-Interior
Switch: 2950
SW1 #show running-config
Building configuration...
Current configuration: 3065 bytes
!
version 12.1
no service button
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
hostname SW1
!
enable secret 5 $1$ yyjN$ h/QH2MA5hvzzC4wvc/f.k.41
!
IP subnet zero
!
!
pvst spanning-tree mode
No spanning tree optimize transmission of bpdus
spanning tree extend id-system
!
!
!
!
interface FastEthernet0/1
switchport access vlan 5
switchport trunk allowed vlan 5,10,20,30
switchport mode access
!
interface FastEthernet0/2
switchport access vlan 5
switchport trunk allowed vlan 5,10,20,30
switchport mode access
!
interface FastEthernet0/3
switchport access vlan 5
switchport trunk allowed vlan 5,10,20,30
switchport mode access
!
interface FastEthernet0/4
switchport access vlan 5
switchport trunk allowed vlan 5,10,20,30
switchport mode access
!
interface FastEthernet0/5
switchport access vlan 10
switchport mode access
!
interface FastEthernet0/6
switchport access vlan 20
!
interface FastEthernet0/7
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/8
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/9
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/10
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/11
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/12
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/13
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/14
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/15
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/16
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/17
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/18
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/19
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/20
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/21
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/22
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/23
switchport access vlan 30
switchport mode access
!
interface FastEthernet0/24
ROUTER1 trunk description
switchport access vlan 30
switchport mode trunk
!
interface Vlan1
10.1.1.100 IP address 255.255.255.0
no ip route cache
Shutdown
!
interface Vlan5
IP 10.10.5.1 255.255.255.0
no ip route cache
!
Default IP gateway 10.0.1.1
IP http server
!
Line con 0
exec-timeout 30 0
password 7 045F191302321816
Synchronous recording
opening of session
line vty 0 4
opening of session
line vty 5 15
opening of session
!
!
end
Router: 2621xm
#show running-config router
Building configuration...
Current configuration: 2073 bytes
!
version 12.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
router host name
!
queue logging limit 100
enable secret 5 $1$ dGwu$ hIqLAqFg1Gf88prFOtlLu.
!
IP subnet zero
!
!
!
LOCAL dhcp IP pool
Network 10.1.5.0 255.255.255.0
DNS-server 209.18.47.61 209.18.47.62
10.1.5.1 - default router
!
IP dhcp WMEE pool
Network 10.1.10.0 255.255.255.0
DNS-server 209.18.47.61 209.18.47.62
default router 10.1.10.1
!
IP dhcp SAY2 pool
Network 10.1.30.0 255.255.255.0
DNS-server 209.18.47.61 209.18.47.62
router by default - 10.1.30.1
!
IP dhcp WITW pool
Network 10.1.20.0 255.255.255.0
DNS-server 209.18.47.61 209.18.47.62
router by default - 10.1.20.1
!
MPLS ldp neighbor-changes logging
!
!
!
!
!
!
!
!
!
No capture buffer voice hpi
No destination capture voice hpi
!
!
MTA receive maximum-recipients 0
!
!
!
!
interface FastEthernet0/0
WAN description
DHCP IP address
NAT outside IP
automatic duplex
automatic speed
No cdp enable
!
interface Serial0/0
no ip address
Shutdown
!
interface FastEthernet0/1
LAN description
IP 10.0.1.1 255.255.255.0
IP nat inside
automatic duplex
Speed 100
No cdp enable
!
interface FastEthernet0/1.5
encapsulation dot1Q 5
10.1.5.1 IP address 255.255.255.0
!
interface FastEthernet0/1.10
encapsulation dot1Q 10
IP 10.1.10.1 255.255.255.0
!
interface FastEthernet0/1.20
encapsulation dot1Q 20
IP 10.1.20.1 255.255.255.0
!
interface FastEthernet0/1.30
encapsulation dot1Q 30
IP 10.1.30.1 255.255.255.0
!
the BRI1/0 interface
no ip address
Shutdown
!
interface BRI1/1
no ip address
Shutdown
!
interface BRI1/2
no ip address
Shutdown
!
interface BRI1/3
no ip address
Shutdown
!
IP nat inside source list 1 interface FastEthernet0/0 overload
no ip address of the http server
IP classless
!
!
!
access-list 1 permit 10.0.0.0 0.0.0.255
!
!
call the rsvp-sync
!
!
profile MGCP default
!
!
!
Dial-peer cor custom
!
!
!
!
Line con 0
exec-timeout 30 0
0117141156185257 7 password
Synchronous recording
opening of session
line to 0
line vty 0 4
opening of session
!
!
end
The default gateway on the switch must be 10.1.5.1. Make the 2950 transparent vtp in order to see what VLAN is created int e config itself. Check that all them VLAN on the 2950 are created using show vlan. Get rid of the address on the vlan 1 just so it is not confused, even if it is stopped. Maybe this might help. Check your acl believe the way you have it, it will match only to what in the 10.0.0.0 won't one of your addresses in 10.1. Try to put your inside nat statements on your subinterfaces for each subnet. Add instructions to your acl to include all your subnets not only 10.0.0.0.
http://www.Cisco.com/en/us/Partner/Tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
-
Can not solve the problems of connection with Wifi (Intel Centrino Advanced - N 6205) card
The card Wifi on my X 220 (Intel Centrino Advanced - N 6205) gave me so much trouble, I'm about to give up on this and buy another laptop.
In general, the connection to any hotspot Wifi in any location is quite unreliable. It looks like it is connected for a while.
And several times a day, sometimes several times per hour, I have to go to the Intel Wifi connection utility and click "Repair" to force the card to renew the IP address. This resets the connection and run for awhile again until I do more.
In recent weeks, I tried everything I could think of. I uninstalled the drivers, installed the latest drivers from the Lenovo Web site, then tried those on the Intel site. Those who are a little more reliable, but the problem persists.
If the drivers of card/can't be fixed, is there a chance to get Wifi to work again if I buy another Wifi card and install it? Should which card I try? Can be installed without sending it to Lenovo?
Any help or ideas is greatly appreciated. Thank you!
-
iTunes problem to connect with iPhone
When I scan for iPhone. Do not sync
But when open the opsin
Follow the instructions here > authorize computer in iTunes - Apple Support
And make sure that iTunes is updated on your computer > get the latest version of iTunes - Apple Support
-
Problem to connect with MS account
Hello
I try to sign in to Skype with my Microsoft account. I use the same login/password Outlook.com and Skype portal (Yes, I can connect on Skype Portal). When I try to login, I get this error message: Sorry, we does not recognize your connection details. Please check your Skype name and password and try again.
I don't have a Skype account so, no link with my account of Ms.
OS: Windows XP SP3 (I know it is obsolete)
IE: 6.0
Skype: 6.18.0.106
Can someone help, please?
Thank you!
You need to update your Internet Explorer currently latest version IE8 for Windows XP.
http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx
-
Tecra S1 - Possible to use the new Power Saver v7.11 for example?
Hi all
is it possible to use a more recent version of the saving on my laptop?
I found for the Tecra S1 as the latest version of the v1.00.34M
THX.
Patrick
Hello
Of course, you can use a more recent version of Toshiba power saver, it's not a problem.
On the Toshiba site, I can find version 1.00.33 for Tecra S1.
However, download and install the latest version for your laptop and it will work.
:)Welcome them
-
Satellite P30: Power Saver installtion does not work
Hello
Please help: can't install / uninstall Toshiba Power Saver 7.03.04C on my P30-116 with Windows XP PRO SP2.
After the first installation, I can see the icon in the status bar. But after the DO NOT restart. My action for the launch of TPS control panel message box causes information "first select Toshiba Power Scheme in the power properties" or sth like that. Uninstall is impossible - error again.Please give me the correct link for the download of WORKING POWER SAVER utilities.
Hello
Don t be angry with me, but there's a saying:
A blind person shouldn't judge colors. ;)OK, now something about your problem:
First of all, it would be very interesting to know why you install energy-saving.
Why don t you use the Toshiba Recovery CD?I assume that you have installed a clean OS then the drivers Toshiba. Am I wrong?
In this case you need to install all THE drivers of Toshiba in the right order (installation instructions is passed on the Toshiba site)PS: If the message "firstly to choose Toshiba Power Scheme in power properties appears try to turn on the Toshiba for energy savings in the:
Control Panel-> power-> power management optionsCU
-
WAP11 access - point adjustment will not save
I'm trying to set up my gateway again after a period of inactivity. I have download the settings to the AP through the USB configuration utility, it says 'DOWNLOAD CONFIG OK' and reflect the setting. Until then goods (specifically I try to activate WEP.) However when I try to log on to the network from my wireless laptop it says unsecured. I leave the configuration utility and reboot, it and the settings are are indented by default! Basically the settings in that I put do not save!
OK, I tried another idea. I downloaded the software from the Web site linksys instead of install from the CD I got with the access point. This seems to have solved the problem. I guess it was a bad install ort the CD what went wrong... Thanks for your help anyway
-
Problem not connected to WIFI when put on
computer satellite 355-s7905, Atheros AR5007EG - pilot 7.6.1.x, Vista Home basic, Belkin F5D6231-4 router - 802. 11B, Norton Antivirus.
When I turn on the computer, the WLAN icon shows connected with limited access (no connection!). Windows says my device WIFI does not work properly. I have check the driver and it is up-to-date.
To connect, I have to go to control panel, disable then enable the driver. Once he got connected, it stays until I restart or shutdown. But when I turn on again, the same problem occurred with computer. Again, to connect, I must manually recycle Devil/activate the driver.
No one knows what may cause this problem? Is anyway to fix this? Help, please. Thank you.
YoursHave you tried the previous version of the Atheros driver on your PC?
In addition, it is useful to check your configuration wireless Belkin router:
Offshore, i.e. the SSID hidden? What is the interval of tag?
The other thing to try is to change your channel wireless in the Belkin router (your PC adapter should pick up after changing anyway). If there is another source of signal, it can interfere with your wireless network. You can check this using the utility of ' Search for Wireless Device "of Toshiba ConfigFree.
-
LAPAC1750 problem of Access Point
I have a camera (Compact Sony Xperia Z1) that cannot connect to the access point. The device can connect to other access points (I tried Motorola, Fritzbox, Cisco) without any problem.
It does not matter what setting I set up on the LAPAC1750. It does work for the Compact of Z1 Sony Xperia.
Any idea?
Buy a UBIQUITI...
Maybe you are looking for
-
XML Core Services offering guard KB954430 KB973688 and Windows 7 KB977165, KB981852 updates
I have a Dell Inspiron 6000 comes with XP, but I've since updated (6 months or more) to Windows 7 Professional... don't know what security pack I 32 bit Microsoft Security Essentials is my anti-virus I do not have Internet Explorer installed, but usi
-
spacing of email staff signarture
I created a personal signature and in the email I create looks good, when I go to print a copy of my email, there are additional spaces between each line. \ How can I get rid of the extra spaces? Thank you. Bob Harvey
-
DMVPN GRE tunnel does not connect a failed encapsulate
Hello I'm trying to set up the tunnel WILL map HWIC Verizon - 3 G-CDMA per Verizons document. Does anyone have a backup on EVDO working? PDF schema - attached Verizons - plug The relevant commands are below HUB END interface Tunnel0IP 192.168.255.89
-
HelloI am a developer of Panel and have a few questions.(1) is there a way to communicate with my clients?(2) if I change the price from free to paid, what happens to users who have the free version? Is the Panel for this yet free users?Thomas
-
Need help to paste in Photoshop
When I copy a picture and paste in Photoshop, how do I change settings so the new page opens according to the size of the copied image and DPI?