Power Saver 0x7E error

Hey, I removed the windows OEM pre-installed and installed my windows, I downloaded all the drivers and software on the site of Toshiba, it all works except the energy saver. When it is installed and want to start, I got the error 0x7E. When I want to remove to install another version, I also got this error.
Does anyone know a solution? Thank you

Hi Bjorn

On this forum I found a few topics with similar theme, but unfortunately there is no universal solution. Obviously a registry entry is wrong and reinstalling doesn't help at all.

I noticed that the problem has been resolved after the reinstallation of the operating system with recovery media. On this way the unit has again factory settings and should not have problems again. I'm sure other applications installed on your device may be an advertisement influence on the sleep feature power.

It's really not easy to say why this is happening.

Tags: Toshiba

Similar Questions

  • Satellite L30-106: Power Saver 0x7E error

    Hi all
    I own a Toshiba Satellite L30-106. I got it from Windows Vista to Windows XP pro, I installed all the Xp drivers provided by the Toshiba site.

    Everything is going well except for the Toshiba Power Saver utility, I can't install it, it still gives this error: error Power Saver 0x7E. Same thing happens when I want to uninstall it. How can I solve this problem?
    Thanks in advance

    Hello

    I hope that you have installed the power saver right!
    The laptop is one of the series PSL33E. Therefore, you should choose the drivers and tools for this series!

    In addition it is very important to install the driver Toshiba and utilities in the right order!
    Then open the installation instructions and follow the lines of this guide!

    Please make sure that you have already installed "TOSHIBA common Modules or / and TOSHIBA Hotkey Utility" ahead!

  • TOSHIBA Power Saver 0x7E error

    Hello.

    It's the short history of XP on my Satellite A200 - 14 d:

    I can't stand Vista, therefore 2 or 3 days after the purchase of my laptop and try Vista, I decided to install my WinXP Pro. At first, it was REALLY hard for me to find drivers. I even installed some Tohiba not who, by the way worked just fine. Then Toshiba began to publish its own non-experimental pilots and I was happy. Everything worked well. After almost a year I was "forced" to reinstall my OS (once again: WinXP Pro). Everything went according to plan, and after 30 minutes, I was greated by the Windows XP Welcome screen. The first task was to install the appropriate drivers.

    Well, very well. I downloaded the latest drivers before reinstalling and kept them on another partition, I was ready to go. I opened the file TXT "new facility" and began to install everything on this list (which of course I downloaded from the Toshiba site). I installed all the drivers in the line, they must be installed (although I don't really know what that some of them may be of no use to me, like a fingerprint, since I have no such thing, but fine - I can't live without a few megabytes :)) until the famouse "Power Saver Utility" has come.) I read in many forums here on this problem, but I never found a solution :(:(:(

    When I tried to install the utility, it spits out an error message with code 0x7E (?). Whenever I boot my OS, this triumph of message on my desk ruin my mood :( I tried to uninstall it (although it is not completely installed - the only thing that shows something on this subject is an icon of the control panel which, pressing on, says that I don't have sufficient rights to access the file (even IF I'm in administrative Mode) and registry keys, which does nothing (I removed it and always appear the messages that I mentioned above)).

    I tried to remove it, but once again with error 0x7E message at the beginning of uninstallation. I even REINSTALLED my OS again and again by installing Power Saver mistakes occur :(:(:( This surprises me a lot, because I've never had such a problem before even the fact that I have not followed the installation instructions. I really need a solution to this. I want to install Vista and the recovery disc. I would if I knew there was no average athor, but I'm sure there is because of the fact that I had no problems before.

    Yes, everyone throws - help. Because without energy saver, my laptop is like your desktop PC, that is--needs to stay connected with alternating current :( And it is not appropriate for a laptop.

    PS: I forgot to mention - no change in the BIOS has been done, although I don't think that this has nothing to do with my problem.

    Hello

    Have you tried two versions of power saver on the Toshiba download page?

  • Toshiba Satellite Pro M30 & Power Saver stop error

    Hello!

    I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

    I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

    any comment on that?

    Andrew.

    Hello

    If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

    It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

    If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

    Good bye

  • TOSHIBA Power Saver - fatal error OX50

    Hello

    Recently, I have a big problem, my Toshiba power saver.
    It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
    Please how can help me solve this problem?

    Hello

    Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

    But may I ask if you install all the drivers in the correct order?
    Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

  • Re: Toshiba Power Saver fatal error. Code 0 x 0

    Hi all

    I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

    It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

    I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

    I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

    Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

    Thanks in advance.

    Raymond

    You must delete it from the registry.

    Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

    Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

    PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

  • Satellite P200: Cannot open the Power Saver - fatal error in Windows XP Home edition

    Hello

    I just installed XP and I came across a problem that is boring. When I finished to install Power Saver and the driver, I got a message saying fatal error and I thought it was because I haven't restarted. Then, after only a day or 2 later I went to the energy saver and he said cannot open because you don't have access rights to "Toshiba Power Saver.

    Is there a solution to this
    Neo-Tech

    Hello

    I put t know if this is a solution but try my proposal:
    First of all, remember that you are registered as an administrator or make sure that you have administrator rights.

    Remove your old system energy saving. You must remove the driver and utility.
    Then reinstall the computer and clean the registry using the freeware like CCleaner.

    Then install the driver of saver of power and after reboot the new install standby power plant.

    I hope it helps

  • Code Toshiba Power Saver Fatal Error 0x51A Tecra M9

    I just bought 5 Tecra M9 and I have the same problem with them whenever I start the laptop:

    "TOSHIBA Power Saver.
    A fatal error has occurred. This program will be terminated code 0x51A'

    And sometimes:
    "TPSMain.exe Application error".
    The application failed to initialize properly (0 x 0000043). Click OK to close the application '

    If I try to open Toshiba Power Saver utility from the control panel it return me to select power mode Toshiba in the list of management of power supply in Power Options, but there is not any diagram power Toshiba on the list.

    Any suggestions?

    Thank you.

    Hello

    Have you tried to reinstall the Toshiba power saver utility?
    Please do it!

    I had a similar problem of Eve on my laptop satellite.
    I finally solved this problem by reinstalling the energy saving and the utility of Modules common Toshiba.
    The common modules are required to run other programs from Toshiba as for example energy saving.

    Just another clue; especially this program error appears because of a corrupted registry.
    You can use the freeware like CCleaner to clean the registry entries.

    Best regards

  • Tecra A9 - Blocking Power Saver - fatal error code: 0 x 2

    Hello

    Today, when I turned on my computer the energy saver has started planting.
    I rebooted the computer several times and the result is always a fatal error has occurred. The program will end. Code: 0x2.

    Even this error appears when I try to reinstall the application.
    Perhaps it has something to do with SP3, I have installed a couple a days ago.

    Someone has an idea?

    Martin Vassilev.

    I saw this error for a long time with Windows XP Home edition. In my opinion it has nothing to do with SP3.
    My experience says that you will not be able to solve this problem. There is something wrong in the registry entries and reinstalling will not help.

    One method can help, OS install new one, more radical using recovery media.

  • Satellite M30: Problems install Power Saver - fatal error has occurred

    7.0.0.3 for something Satellite M30.

    After setting up, I get a "fatal error occurred. The program took end code ox2.

    Any ideas on whats wrong?

    Hello

    I put t know exactly what's wrong, but I remember these problems might appear if the drivers, tools, and utilities are installed in the correct order.
    The installation instructions document is no doubt placed on the page of the Toshiba driver.
    I recommend that you check these documents

    But why you don t use the Toshiba Recovery CD. This CD allows you to install the operating system with all the necessary tools and drivers much faster and easier.

  • M40-110: error Power saver

    Hello world. I own a M40-110

    Can someone pls help me with the following:

    Lately, I get the following error. "power saver fatal error occurred 0 x 0" any idea what this means?

    Also ever since that time, my computer starts very slowly. Splash screen takes 3-5 minutes to open and once I have my screen is supposed to be up and indicator disc HARD running only turns blue and my screen gets frozen.

    going to go crazy I bought this computer a month ago...
    Help, please
    Thank you
    Alican

    Hello

    Try to recover your operating system with the recovery CD.
    If this problem of still images, I suggest you contact the ASP.
    If your laptop is only a month, your warranty will cover all replacements.
    But first check if it s something wrong with the operating system.

    Good bye

  • Qosmio G20, Toshiba Power saver error

    When I turn the Qosmio G20, I have a message "Toshiba Power Saver, fatal error has occurred, this program will end. Code 0 x 2ยป
    I click on the 'ok' button and can use the computer, but after using for a while (about 1 hour for example), it becomes very slow. I check the Task Manager and find that "ccSvcHst.exe" takes up 99-100% of CPU usage. I have to turn power off, then again to use another 1 or 2 hours before slowing down again.
    Help, please.

    Have you tried to delete Toshiba saving energy of the system and see if the laptop will slow down again?

    Have you tried to reinstall Toshiba power saver?

  • Satellite Pro M70: Errror Message Power saver - code: 0x0

    Whenever I start my Satellite Pro M70 I now get an error Toshiba power Saver.
    It reads "Toshiba Power Saver A Fatal error has occurred. The program will be terminated code: 0x0.

    Can anyone suggest how to get rid of it.

    Thank you

    Hello

    It's not easy to say why this power saver utility error message, but generally a new installation of this tool should solve the problem.
    Have you tried to reinstall the energy saver?

  • Satellite A11-998: fatal error Power Saver - code: 0x7e

    I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

    "A fatal error has occurred. The program will end. "Code: 0x7e.

    The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

    See you soon

    It seems that there is no general solution for this problem.
    I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11238&MessageID=40588
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9573&MessageID=33773

    But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
    The order is very important and necessary if you want to install the Toshiba applications on your operating system.
    I also discovered that the laptop uses Power saver power saver utility and driver.
    I think you need to first install the driver and utility.

    But everything should be described in the installation instructions

  • Error of Toshiba power saver - A60

    When I install the Toshiba power saver on my laptop A60 with WinXPpro SP2, it
    Displays the following error:

    A fatal error has occurred. The program will end. Code: 0x7E
    Also at the opening of the power saver option in the control
    Panel to get the message: could not open energy like u
    am not prepared the administrative rights to open it.

    Hello

    Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773

Maybe you are looking for

  • Audio driver on Tecra A8 problems

    We have a set of about 20 of Tecra A8 in our society. All of our updates are controlled by a local windows update server and all the new windows updates are approved by week. Some of the A8, after an unknown update had any audio just stop them workin

  • Sam 1900-303: belkinF5U222 card will not run at hi speed

    I have a toshiba satellite 1900 303 and that you have connected to the usb 2.0 card belkin hi-speed, but it will run at the hi speed. whenever I connect something told him it this article could run faster please connect to a hi speed port? He then sh

  • Problem with updates of security for MS Office Outlook 2003 (KB973705) and the Outlook junk mail filter (974771 KB)

    I had problems trying to install the update of security for MS Office Outlook 2003 (973705 KB) and update for MS Office Outlook 2003 Junk e-mail filter (974771 KB). I get the error code 646. First of all. What is this code? I looked around and could

  • I have 2 of the same operating system?

    I have Windows Vista 32 bit Premium on my laptop, my friend was playing with my computer and now it won't start! When I try to start, it goes to the Windows Boot Manager and wonder what operating system to begin with, and the two say windows vista op

  • net.rim.device.api.io.file.FileIOException: file system resources

    I'm really lost here. On one of the 100 customers reports this error for one of my applications (different phones, different OS). The application creates a file on SD card (or DeviceMemory so no SD card), the code is not run at startup, but once user